PEUGEOT Connect Radio
The balance/distribution (or spatialisation
with the Arkamys© system) uses audio
processing to adjust the sound quality
according to the number of passengers in the
vehicle.
When the digital radio signal is poor, the
"FM-DAB Follow-up" enables you to continue
listening to the same station by automatically
switching to the corresponding "FM" analogue
station (if there is one).
Press Radio Media to display the main
page.
Press the "OPTIONS" button to go to the
secondary page.
Media
USB port
Insert the USB memory stick into the USB
port or connect the USB device to the
USB port using a suitable cable (not supplied).
Onboard audio: Arkamys Sound Staging©
optimises the sound distribution inside
the passenger compartment.
To protect the system, do not use a USB
hub.
Activate/deactivate "FM-DAB Follow-up".
The system builds playlists (in temporary
memory); this operation can take from a
few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
Playlists are updated whenever the ignition
is switched off or a USB memory stick is
connected. The audio system memorises these
lists, which will subsequently load faster if they
have not been changed.
Press in the shaded area to confirm.
DAB (Digital Audio
Broadcasting) radio
If "FM-DAB Follow-up" is activated, there
may be a time offset of a few seconds
Terrestrial Digital Radio
when the system switches to "FM" analogue
radio, and in some cases a change in volume.
When the digital signal quality is restored, the
system automatically changes back to "DAB".
To minimise this time lag, storing radio
Digital radio provides higher quality sound.
The various "multiplexes/ensembles" offer a
choice of radio stations organised in alphabetical
order.
Press Radio Media to display the main
page.
Press the "OPTIONS" button to access the
secondary page.
stations in the "DAB" band is recommended.
Auxiliary (AUX) jack socket
Depending on equipment
Connect a portable device (MP3 player,
etc.) to the auxiliary jack socket using an
audio cable (not supplied).
If the "DAB" station being listened to is
not available on "FM", or if "FM-DAB
Follow-up" is not activated, the sound will cut
out when the digital signal becomes too weak.
Press "Band" to select "DAB band".
Press in the shaded area to confirm.
This source is only available if "Auxiliary input"
has been selected in the audio settings.
First adjust the volume on the portable device
(to a high level). Then adjust the volume of the
audio system.
FM-DAB Follow-up
"DAB" does not cover 100% of the territory.
Controls are managed via the portable device.
250
English 
