Practical information
The locations of the following components may
vary:
– Air filter.
– Engine oil dipstick.
– Engine oil filler cap.
Diesel fuel system
This system is under very high pressure.
All work must be carried out only by a
7
PEUGEOT dealer or a qualified workshop
Electric motor
Petrol engine
► Unclip the stay from its housing and place it
in the support slot to hold the bonnet open.
1. Screenwash fluid reservoir
2. Engine coolant reservoir (level only)
3. Brake fluid reservoir
4. Battery/Fuses
5. Remote earth point (-)
6. Fusebox
7. 400 V electrical circuit
8. Emergency circuit-breaker for emergency
services and maintenance technicians
Diesel engine
Closing
► Hold the bonnet and pull out the stay from the
support slot.
► Clip the stay in its housing.
► Lower the bonnet and release it near the end
of its travel.
► Pull on the bonnet to check that it is locked
correctly.
1. Screenwash fluid reservoir
2. Engine coolant reservoir
3. Brake fluid reservoir
4. Battery/Fuses
5. Remote earth point (-)
6. Fusebox
7. Air filter
8. Engine oil filler cap
9. Engine oil dipstick
For more information on the Charging system
(Electric), refer to the corresponding section.
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water (rain,
washing, etc.) be limited.
Checking levels
Check all of the following levels regularly in
accordance with the manufacturer's service
schedule. Top them up if required, unless
otherwise indicated.
Engine compartment
The engine shown here is an example for
illustrative purposes only.
191
English 
