ACCESS -> Electric windows for Your Peugeot Rcz 2 Door First Generation (2009-2015)

ELECTRIC WINDOWS  
Fitted with a safety anti-pinch system.  
The electric window switches remain operational for approximately  
45 seconds after the ignition is switched off or until the vehicle is  
locked after a door is opened.  
If the passenger's window cannot be operated from the driver's  
door control panel, carry out the operation from the control panel  
of the passenger door.  
After approximately ten consecutive complete opening/closing  
movements of the window, a protection function is activated which  
only authorises closing of the windows, so as to prevent damage  
to the electric window motor.  
Once the window is closed, the switches will become operational  
again after approximately 40 minutes.  
A. Left-hand electric window.  
B. Right-hand electric window.  
Safety anti-pinch  
When the window rises and meets an obstacle, it stops and partially  
lowers again.  
ONE-TOUCH ELECTRIC WINdOWS  
There are two options:  
-
manual mode  
If the window cannot be closed (for example, in the presence of  
ice), immediately after the movement is reversed:  
F Press or pull the switch gently. The window stops when the  
switch is released.  
F
F
press and hold the switch until the window opens fully,  
-
automatic mode  
then pull the switch immediately and hold it until the window  
closes,  
F Press or pull the switch firmly. The window opens or closes fully  
when the switch is released.  
F
continue to hold the switch for approximately one second after  
the window has closed.  
F Pressing the switch again stops the movement of the window.  
The safety anti-pinch function is not operational during these  
operations.  
44  
Reinitialisation  
Always remove the key from the ignition when leaving the vehicle,  
even for a short time.  
If a window does not rise automatically, after reconnecting the battery  
for example, its operation must be reinitialised:  
If an obstacle is encountered during operation of the electric  
windows, you must reverse the movement of the window. To do  
this, press the switch concerned.  
F
F
F
pull the switch until the window stops,  
release the switch and pull it again until the window closes fully,  
When the driver operates the switch for the passenger's electric  
window, they must ensure that no one is preventing correct  
closing of the windows.  
continue to hold the switch for approximately one second after the  
window has closed,  
F
F
press the switch to lower the window automatically to the low  
position,  
The driver must ensure that the passengers use the electric  
windows correctly.  
when the window has reached the low position, press the switch  
again for approximately one second.  
Be aware of children when operating the windows.  
The safety anti-pinch function is not operational during these  
operations.  
45