Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Instruments for Your Peugeot Rifter 4 Door 2003-2017

Instruments  
With LCD symbols instrument panel  
Indicators with LCD text or  
matrix instrument panel  
Instrument panel  
Speedometer  
1
1. Fuel gauge.  
1. Engine coolant fluid temperature gauge.  
2. Speed limiter or cruise control settings.  
3. Digital speedometer (mph or km/h).  
2. Engine coolant fluid temperature gauge.  
4. Gear shift indicator.  
Gear with an automatic gearbox.  
Display screen  
5. Fuel gauge.  
6. Engine oil level indicator.  
7.  
Service indicator, then total distance  
recorder (miles or km).  
These functions are displayed  
successively on switching on the ignition.  
When travelling abroad, you may have  
to change the distance units: the display  
of road speed must be in the official  
units (miles or km) for the country. The  
change of units is done via the screen  
configuration menu, with the vehicle  
stationary.  
Analogue speedometer (mph or km/h).  
8. Trip distance recorder (miles or km).  
11  
Instruments  
With LCD text instrument panel  
With matrix instrument panel  
Control buttons  
With LCD symbols instrument panel  
1. Speed limiter or cruise control settings.  
2. Digital speedometer (mph or km/h).  
1. Speed limiter or cruise control settings.  
A. General lighting dimmer.  
After a long press on SET: change the set  
time values and the units.  
2. Gear shift indicator.  
Gear with an automatic gearbox.  
3. Gear shift indicator.  
Gear with an automatic gearbox.  
3. Display area: alert or function state  
message, trip computer, digital  
B. Reminder of servicing information or the  
remaining range with the SCR system  
and the AdBlue®.  
4
Service indicator, then total distance  
recorder (miles or km), trip distance  
recorder (miles or km), message displays,  
etc.  
speedometer (mph or km/h), etc.  
4
Service indicator, then total distance  
recorder (miles or km).  
Resetting the function selected (service  
indicator or trip recorder).  
After a long press: change the set time  
values and the units.  
These functions are displayed  
successively on switching on the ignition.  
5
Trip distance recorder (miles or km).  
12  
Instruments  
When the ignition is switched on  
With LCD text instrument panel  
With matrix instrument panel  
Rev counter  
Certain red or orange warning lamps come on  
for a few seconds when the ignition is switched  
on. These warning lamps should go off as soon  
as the engine is started.  
1
Persistent warning lamp  
A. Reminder of servicing information or the  
remaining range with the SCR system  
and the AdBlue®.  
When the engine is running or the vehicle is  
being driven, the illumination of a red or orange  
warning lamp indicates a fault that needs  
further investigation, using any associated  
message and the description of the warning  
lamp in the documentation.  
Depending on version: go back up a level,  
cancel the current operation.  
B. General lighting dimmer.  
Rev counter (x 1,000 rpm).  
Depending on version: movements in  
a menu, a list; changing a value.  
Warning and indicator lamps Where a Resetting lamp remains lit  
C. Resetting the trip distance recorder (long  
press).  
The references (1), (2) and (3) in the warning  
Displayed as symbols, visual indicators  
and indicator lamp description indicate whether  
which inform the driver of the occurrence  
you should contact a qualified professional  
of a malfunction (warning lamps) or of the  
in addition to the immediate recommended  
operating status of a system (operation or  
actions.  
Resetting the service indicator.  
Depending on version: enter the  
configuration menu and confirm a choice  
(short press).  
deactivation indicator lamps). Certain lamps  
light up in two ways (fixed or flashing) and/or in  
several colours.  
(1): You must stop as soon as it is safe to  
do so and switch off the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
Associated warnings  
The illumination of a lamp may be accompanied  
by an audible signal and/or a message  
displayed in a screen.  
Relating the type of alert to the operating status  
of the vehicle allows you to determine whether  
the situation is normal or a fault has occurred:  
refer to the description of each lamp for further  
information.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
13  
Instruments  
List of warning and indicator lamps  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Red warning/indicator lamps  
STOP  
Fixed, associated with Indicates a serious fault with the  
another warning lamp, engine, braking system, power  
Carry out (1) and then (2).  
accompanied by the  
display of a message  
and an audible signal.  
steering, automatic gearbox or  
a major electrical fault.  
Engine oil pressure Fixed.  
There is a fault with the engine  
lubrication system.  
Carry out (1) and then (2).  
Brakes  
Fixed.  
Fixed.  
The brake fluid level has dropped Carry out (1), then top up with brake fluid that complies  
significantly.  
with the manufacturer's recommendations. If the  
problem persists, carry out (2).  
The electronic brake force  
distribution (EBFD) system is  
faulty.  
Carry out (1) and then (2).  
+
Parking brake  
Fixed.  
The parking brake is applied or  
not properly released.  
(1): You must stop as soon as it is safe to do  
(2): Contact a PEUGEOT dealer or a qualified  
(3): Go to a PEUGEOT dealer or a qualified  
so and switch off the ignition.  
workshop.  
workshop.  
14  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
°C  
Maximum coolant  
temperature  
Fixed (warning lamp or The temperature of the cooling  
LED) and needle in the system is too high.  
red zone (depending  
Carry out (1), then wait until the engine has cooled  
down before topping up the coolant, if necessary. If  
the problem persists, carry out (2).  
90  
on version).  
Battery charge  
Power steering  
Fixed.  
Fixed.  
The battery charging circuit has  
a fault (dirty or loose terminals,  
slack or cut alternator belt, etc.).  
Clean and retighten the terminals. If the warning  
lamp does not go off when the engine is started, carry  
out (2).  
The power steering has a fault.  
Drive carefully at moderate speed, then carry out (3).  
Seat belt not  
fastened/  
unfastened  
Fixed or flashing  
accompanied by an  
audible signal.  
A seat belt has not been  
fastened or has been unfastened  
(depending on version).  
Door open  
Fixed, associated with A door, the boot, the tailgate or  
a message identifying the tailgate screen is still open  
Close the access.  
If your vehicle is equipped with a right-hand side-  
hinged door, its opening will not be indicated by this  
warning lamp.  
the access.  
(depending on version).  
An audible signal  
supplements the alert  
if the speed is higher  
than 6 mph (10 km/h).  
Electric parking  
brake  
Fixed.  
The electric parking brake is  
applied.  
15  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Orange warning/indicator lamps  
Automatic  
Fixed.  
The "automatic application" (on  
switching off the engine) and  
"automatic release" functions are  
deactivated.  
Activate the functions again.  
functions (with  
electric parking  
brake)  
Automatic  
Fixed, accompanied  
by the message  
"Parking brake fault".  
The automatic application is not  
available, the parking brake can  
only be used manually.  
Use the electric parking brake control lever.  
If automatic release is also not available, use manual  
release.  
application (with  
electric parking  
brake)  
+
+
Malfunction (with  
electric parking  
brake)  
Fixed, accompanied  
by the message  
"Parking brake fault".  
The parking brake is not  
operating at maximum efficiency  
and cannot ensure parking the  
vehicle in complete safety in all  
situations.  
Make your vehicle safe:  
F Park on a level surface.  
F With a manual gearbox, engage a gear.  
F With an automatic gearbox, with P selected, place  
the supplied chocks against one of the wheels.  
Then carry out (2).  
+
+
Malfunction (with  
electric parking  
brake)  
Flashing, when the  
vehicle is started.  
The parking brake has not been  
properly released.  
Carry out (1) and try to completely release the parking  
brake using the control lever, with your foot on the  
brake pedal.  
+
+
If the problem persists, carry out (2).  
16  
Instruments  
Warning/indicator lamp  
Low fuel level  
State  
Cause  
Actions/Observations  
1
Fixed (warning lamp or LED) and  
When it first comes on, there  
Refuel without delay to avoid running  
out of fuel.  
Never drive until completely  
empty, this could damage the  
emissions and injection systems.  
needle in the red zone (depending on remains less than 6 litres of fuel in  
version), accompanied by an audible the tank.  
signal and a message.  
1
1 /2  
The audible warning and the  
message are repeated with  
increasing frequency as the fuel level  
drops towards zero.  
Presence of water  
in Diesel filter  
Fixed (with LCD symbols instrument The Diesel filter contains water.  
panel).  
Risk of damage to the injection  
system: carry out (2) without delay.  
Engine diagnostic  
system  
Flashing.  
Fixed.  
The engine management system has There is a risk that the catalytic  
a fault.  
converter will be destroyed.  
Carry out (2) without fail.  
The emissions control system has  
a fault.  
The warning lamp should go off  
when the engine is started.  
Carry out (3) quickly.  
Fixed.  
A minor engine fault has been  
detected.  
Carry out (3).  
+
+
Fixed.  
A major engine fault has been  
detected.  
Carry out (1) and then (2).  
17  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Diesel engine pre-  
heating  
Fixed.  
The period of  
illumination depends on  
the climatic conditions.  
The ignition is on.  
Wait until the warning lamp goes off before starting.  
If the engine does not start, switch the ignition off and  
then on, wait until the minor engine fault lamp goes off  
again, then start the engine.  
Under-inflation  
Fixed, accompanied  
by an audible signal  
and a message.  
The pressure in one or more  
wheels is too low.  
Check the pressure of the tyres as soon as possible.  
Reinitialise the detection system after adjusting the  
pressure.  
Under-inflation  
The system is faulty: tyre  
As soon as possible, check the pressure of the tyres  
and carry out (3).  
warning lamp flashing pressures are no longer  
then fixed and Service monitored.  
warning lamp fixed.  
+
Anti-lock braking  
system (ABS)  
Fixed.  
The anti-lock braking system has The vehicle retains conventional braking.  
a fault.  
Drive carefully at moderate speed, then carry out (3).  
Collision Risk  
Alert/Active Safety by the display of  
Brake  
Fixed, accompanied  
The system has been deactivated  
via the vehicle configuration  
menu.  
a message.  
Flashing.  
The system is operating.  
The vehicle brakes briefly so as to reduce the speed of  
collision with the vehicle ahead.  
Fixed, accompanied  
by a message and an  
audible signal.  
The system has a fault.  
Carry out (3).  
Collision Risk  
Alert/Active Safety  
Brake  
Fixed.  
The system has a fault.  
If these lamps come on after the engine is switched  
off and restarted, carry out (3).  
+
18  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Particle filter  
(Diesel)  
Fixed, accompanied  
by an audible signal  
and a message about  
the risk of particle filter  
blockage.  
The particle filter is beginning to  
saturate.  
As soon as traffic conditions allow, regenerate the  
filter by driving at a speed of at least 37 mph (60 km/h)  
until the lamp goes off.  
Fixed, accompanied  
by an audible signal  
and a message  
The minimum level of the additive Top up as soon as possible: carry out (3).  
reservoir has been reached.  
signalling that the  
additive level in the  
particle filter is too low.  
Airbags  
Fixed.  
One of the airbags or seat belt  
pretensioners is faulty.  
Carry out (3).  
Front passenger  
airbag (ON)  
Fixed.  
The front passenger airbag is  
activated.  
The control is in the "ON"  
position.  
In this case, do NOT install a "rearward facing"  
child seat on the front passenger seat – Risk of  
serious injury!  
Front passenger  
airbag (OFF)  
Fixed.  
Fixed.  
The front passenger airbag is  
deactivated.  
The control is in the "OFF"  
position.  
You can install a "rearward facing" child seat, unless  
there is a fault with the airbags (Airbags warning lamp  
on).  
Dynamic stability  
control (DSC) and  
anti-slip regulation  
(ASR)  
The system is deactivated.  
Press the button to reactivate it.  
The DSC/ASR system is activated automatically  
when the vehicle is started, and from around 30 mph  
(50 km/h).  
19  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Dynamic stability  
control (DSC) and  
anti-slip regulation  
(ASR)  
Flashing.  
The DSC/ASR regulation is  
activated if there is a loss of grip  
or trajectory.  
Fixed.  
Fixed.  
The DSC/ASR system has a fault. Carry out (3).  
Hill start assist  
The system has a fault.  
Carry out (3).  
+
+
Emergency brake  
anomaly (with  
Fixed, accompanied  
by the message  
Emergency braking does not  
have full power.  
If automatic release is not available, use manual  
release.  
electric parking  
"Parking brake fault".  
brake)  
+
Active Lane  
Departure Warning  
System  
Fixed.  
The system has been automatically  
deactivated or placed on standby.  
Flashing.  
You are about to cross a broken  
lane marking without operating  
the direction indicators.  
The system is activated, then corrects the trajectory  
on the side of the lane marking detected.  
20  
Instruments  
Warning/indicator lamp  
Active Lane  
State  
Cause  
Actions/Observations  
1
Fixed.  
The system has a fault.  
Carry out (3).  
Departure Warning  
System  
+
AdBlue®(with  
Fixed, on switching  
The remaining driving range is  
between 1,500 and 375 miles  
(2,400 and 600 km).  
Top up the AdBlue® as soon as possible, or carry  
out (3).  
1.6 BlueHDi Euro 6.1) on the ignition,  
accompanied by an  
audible signal and  
a message indicating  
the remaining driving  
range.  
AdBlue® warning lamp The driving range is less than  
You must top up the AdBlue® to avoid a breakdown,  
flashing and Service  
warning lamp fixed,  
accompanied by an  
audible signal and  
a message indicating  
the remaining driving  
range.  
375 miles (600 km).  
or carry out (3).  
+
AdBlue® warning  
lamp flashing and  
Service warning lamp  
fixed, accompanied  
by an audible signal  
and a message  
The AdBlue® tank is empty: the  
starting inhibition system required out (2).  
by legislation prevents starting of It is essential to add at least 5 litres of AdBlue® to its  
To restart the engine, top up the AdBlue® or carry  
the engine.  
tank.  
indicating that starting  
is prevented.  
21  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
AdBlue®  
On for around  
The remaining driving range is  
Top up the AdBlue®.  
(with 1.5 BlueHDi  
Euro 6.2)  
30 seconds every time between 1,500 and 500 miles  
the vehicle is started,  
accompanied by  
a message indicating  
the remaining driving  
range.  
(2,400 and 800 km).  
Fixed, on switching  
on the ignition,  
The remaining driving range is  
between 500 and 60 miles (800  
and 100 km).  
Top up the AdBlue® as soon as possible, or carry  
out (3).  
accompanied by an  
audible signal and  
a message indicating  
the remaining driving  
range.  
Flashing,  
The driving range is less than  
60 miles (100 km).  
You must top up the AdBlue® to avoid a breakdown,  
or carry out (3).  
accompanied by an  
audible signal and  
a message indicating  
the remaining driving  
range.  
Flashing,  
The AdBlue® tank is empty:  
the starting prevention system  
required by legislation prevents  
starting of the engine.  
To restart the engine, top up the AdBlue®, or carry  
accompanied by an  
audible signal and  
a message indicating  
that starting is  
prevented.  
out (2).  
It is essential to add at least 5 litres of AdBlue® to its  
tank.  
22  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
SCR emissions  
control system  
Fixed when the  
A fault with the SCR emissions  
control system has been  
detected.  
This alert disappears once the exhaust emissions  
return to normal levels.  
ignition is switched  
on, accompanied by  
an audible signal and  
a message.  
+
+
AdBlue® warning  
lamp flashing, on  
switching on the  
ignition, associated  
with the fixed Service  
Depending on the message  
displayed, you can continue  
driving for up to 685 miles  
(1,100 km) before the engine  
starting prevention system is  
Carry out (3) as soon as possible to avoid running  
out of fuel.  
and engine diagnostic triggered.  
warning lamps,  
accompanied by an  
audible signal and  
a message indicating  
the remaining driving  
range.  
AdBlue® warning  
lamp flashing, on  
switching on the  
ignition, associated  
with the fixed Service  
and engine diagnostic  
warning lamps,  
An engine immobiliser prevents  
To restart the engine, carry out (2).  
the engine from restarting (over  
the authorised driving limit after  
confirmation of a fault with the  
emissions control system).  
accompanied by an  
audible signal and  
a message.  
23  
Instruments  
Warning/indicator lamp  
Service  
State  
Cause  
Actions/Observations  
Temporarily on,  
One or more minor faults for  
Identify the cause of the fault using the message  
accompanied by the  
display of a message.  
which there is no specific warning displayed in the instrument panel.  
lamp have been detected.  
You can deal with certain anomalies yourself, for  
example an open door or the start of saturation of the  
particle filter.  
For any other problems, such as a fault with the tyre  
under-inflation detection system, carry out (3).  
Fixed, accompanied  
by the display of  
a message.  
One or more major faults for  
which there is no specific warning displayed in the instrument panel, then carry out (3).  
lamp have been detected.  
Identify the cause of the fault using the message  
Fixed, accompanied  
by the message  
Automatic release of the electric  
parking brake is unavailable.  
Carry out (2).  
'Parking brake fault'.  
Service warning lamp  
fixed and service  
spanner flashing then  
fixed.  
Service is overdue.  
Only with BlueHDi Diesel versions.  
Your vehicle must be serviced as soon as possible.  
+
Malfunction (with  
electric parking  
brake)  
Fixed, accompanied  
by the message  
"Parking brake fault".  
You can no longer immobilise the If manual application and release are not working, the  
vehicle with the engine running.  
electric parking brake control lever is faulty.  
The automatic functions must be used at all times and  
are automatically reactivated in the event of failure of  
the control lever.  
+
Carry out (2).  
24  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Malfunction (with  
electric parking  
Fixed, accompanied  
by the message  
"Parking brake fault".  
The parking brake is faulty:  
manual and automatic functions  
may not be working.  
When stationary, to immobilise your vehicle:  
F Pull and hold the control lever for approximately  
7 to 15 seconds, until the fault lamp comes on in  
the instrument panel.  
brake)  
+
If this procedure does not work, make your vehicle  
safe:  
F Park on a level surface.  
+
F With a manual gearbox, engage a gear.  
F With an automatic gearbox, select P, then put the  
supplied chocks against one of the wheels.  
Then carry out (2).  
Malfunction of the  
braking systems  
(with Post Collision  
Safety Brake  
(PCSB))  
Fixed.  
Fixed.  
Carry out (3) quickly.  
Carry out (3) quickly.  
+
Malfunction of  
the airbags or  
+
pyrotechnic  
pretensioning  
systems (with Post  
Collision Safety  
Brake (PCSB))  
Rear foglamp  
Fixed.  
The lamp is on.  
25  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
Green warning/indicator lamps  
Stop & Start  
Fixed.  
When the vehicle stops, the Stop & Start puts  
the engine into STOP mode.  
Flashing  
temporarily.  
STOP mode is momentarily unavailable or  
START mode is automatically triggered.  
Hill Assist Descent Fixed.  
Control  
The system has been activated, but the  
conditions for regulation are not met (gradient,  
speed too high, gear engaged).  
Flashing.  
The function is starting regulation.  
ECO mode is active.  
The vehicle is being braked; the brake lamps  
come on during the descent.  
Eco mode  
Fixed.  
Certain parameters are adjusted with a view  
to reducing fuel consumption.  
Automatic wiping  
Fixed.  
Automatic front wiping is activated.  
Front foglamps  
Sidelamps  
Fixed.  
Fixed.  
The front foglamps are on.  
The lamps are on.  
Direction  
indicators  
Flashing with  
audible signal.  
The direction indicators are on.  
26  
Instruments  
Warning/indicator lamp  
State  
Cause  
Actions/Observations  
1
Dipped beam headlamps Fixed.  
The lamps are on.  
Automatic  
headlamp dipping  
Fixed.  
The function has been activated via the touch  
screen (Vehicle/Driving menu).  
The lighting control stalk is in the "AUTO"  
position.  
+
or  
Blue warning/indicator lamps  
Main beam headlamps Fixed.  
The lamps are on.  
Black/white warning/indicator lamps  
Foot on the brake  
Foot on the clutch  
Automatic wiping  
Fixed.  
Fixed.  
Fixed.  
Omission or insufficient pressure on the brake With an automatic gearbox, with the engine  
pedal.  
running, before releasing the parking brake, to  
move out of position P.  
Stop & Start: the change to START mode is  
rejected because the clutch pedal is not fully  
depressed.  
Fully depress the clutch pedal.  
Automatic front wiping is activated.  
(1): You must stop as soon as it is safe to do  
so and switch off the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
27  
Instruments  
-
an alert message indicates the distance  
remaining, as well as the period before the  
next service is due or how long it is overdue.  
Resetting the service indicator  
Indicators  
Service indicator  
The service indicator must be reset after each  
service.  
F Switch off the ignition.  
The service indicator is displayed in the  
instrument panel. Depending on the vehicle  
version:  
The distance indicated (in miles or  
kilometres) is calculated according to the  
distance covered and the time elapsed  
since the last service.  
The alert may be triggered close to a due  
date.  
-
the distance recorder display line indicates  
the distance remaining before the next  
service is due, or the distance travelled  
since it was due preceded by the "-" sign.  
Actions/  
Cause  
Warning/indicator lamp  
State  
Observations  
Service spanner Lights up temporarily  
when the ignition is  
Between 1,860 miles  
(3,000 km) and  
620 miles (1,000 km)  
remain before the  
next service is due.  
F Press and hold this button.  
F Switch on the ignition; the distance recorder  
display begins a countdown,  
F Release the button when =0 is displayed;  
the spanner disappears.  
switched on.  
Fixed, when the  
The service  
Have your vehicle  
ignition is switched on. is due in less  
than 620 miles  
serviced very soon.  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least five minutes for the reset  
to be registered.  
(1,000 km).  
Service spanner Flashing then fixed,  
The servicing  
interval has been  
exceeded.  
Have your vehicle  
serviced as soon  
as possible.  
flashing  
when the ignition is  
switched on.  
(For BlueHDi Diesel  
versions, associated  
with the Service  
warning lamp).  
+
Retrieving the service information  
You can access the service information at any  
time.  
28  
Instruments  
Resetting the trip recorder  
F Press this button.  
The service information is displayed for a few  
seconds, then disappears.  
Distance recorders  
The total and trip distances are displayed for  
thirty seconds when the ignition is switched off,  
when the driver's door is opened and when the  
vehicle is locked or unlocked.  
1
Instrument panel display screen  
Total distance recorder  
F With the ignition on, press the button until  
dashes appear.  
Engine coolant temperature  
It measures the total distance travelled by the  
vehicle since its first registration.  
When stationary, use the left-hand dial on  
the steering wheel or the "SET" button in  
the instrument panel to navigate through the  
menus to configure certain vehicle settings.  
Operation of the dial:  
Trip distance recorder  
It measures the distance travelled since it was  
reset by the driver.  
With the engine running, when the needle or  
bar graph (depending on version) is:  
-
-
-
Press: go to the Main menu, confirm the  
selection.  
Rotate (other than in a menu): scroll through  
the list of active functions available.  
Rotate (in a menu): move up or down in the  
menu.  
-
in zone A, the temperature of the engine  
coolant is correct,  
29  
Instruments  
in zone B, the temperature of the engine  
-
If the low oil level is confirmed by a check using  
the dipstick, the level must be topped up to  
avoid damage to the engine.  
Engine oil level indicator  
coolant is too high; the maximum  
On versions fitted with an electric oil level  
indicator, the state of the engine oil level is  
displayed in the instrument panel for a few  
seconds when the ignition is switched on, at  
the same time as the servicing information.  
temperature and central STOP warning  
lamps come on, accompanied by an audible  
signal and a warning message.  
Oil level indicator fault  
You must stop as soon as it is safe to do so.  
Wait a few minutes before switching off the  
engine.  
Contact a PEUGEOT dealer or a qualified  
workshop.  
The level read will only be correct if  
the vehicle is on level ground and the  
engine has been stopped for more than  
30 minutes.  
This is indicated by a message in the  
instrument panel. Contact a PEUGEOT dealer  
or a qualified workshop.  
Checking  
After driving for a few minutes, the temperature  
and pressure in the cooling system increase.  
To top up the level:  
F wait at least one hour for the engine to cool,  
F unscrew the cap by two turns to allow the  
pressure to drop,  
Oil level correct  
Dipstick  
To locate the dipstick and the oil filler  
cap for the Diesel engine, refer to the  
corresponding section.  
F when the pressure has dropped, remove the  
cap,  
F top up the level to the "MAX" mark.  
This is indicated by a message in the  
instrument panel.  
For more information on Checking levels,  
refer to the corresponding section.  
A = maximum; never  
exceed this level.  
Low oil level  
B = minimum; top up  
the level via the oil filler  
hole, with the oil type  
that is suitable for your  
engine.  
Be aware of the risk of scalding when  
topping up the coolant. Do not fill above  
the maximum level (indicated on the  
reservoir).  
This is indicated by a message in the  
instrument panel.  
30  
Instruments  
AdBlue® range indicators  
It is essential to top up as soon as possible and  
before the tank is completely empty; otherwise  
it will not be possible to restart the engine after  
the next stop.  
With 1.6 BlueHDi (Euro 6.1) engine  
Remaining range between 1,500 and 500  
miles (2,400 and 800 km)  
1
These range indicators are present only on  
BlueHDi Diesel versions.  
Once the AdBlue® tank is on reserve or after  
detection of a fault with the SCR emissions  
control system, when the ignition is switched  
on, an indicator displays an estimate of the  
distance that can be covered, the range, before  
engine starting is prevented.  
Breakdown due to a lack of AdBlue®  
When switching on the ignition, this warning  
lamp comes on, accompanied by an audible  
signal and the display of a message ("Top  
up AdBlue: Starting impossible in x miles")  
indicating the remaining range expressed in  
miles or kilometres.  
When driving, this message is displayed every  
185 miles (300 km) until the fluid level has been  
topped up.  
When switching on the ignition, this warning  
lamp flashes, along with the Service warning  
lamp, accompanied by an audible signal and  
the display of the message "Top up AdBlue:  
Starting impossible".  
The AdBlue® tank is empty: the starting  
prevention system required by legislation  
prevents starting of the engine.  
In the event of the risk of non-  
starting related to a lack of AdBlue®  
The reserve level has been reached; it is  
recommended that you top up as soon as  
possible.  
The engine starting prevention system  
required by regulations is activated  
automatically once the AdBlue® tank is  
empty.  
To be able to restart the engine, it is  
essential to add at least 5 litres of AdBlue®  
to its tank.  
Remaining range less than 375 miles  
(600 km)  
Range greater than 1,500 miles (2,400 km)  
When the ignition is switched on, no  
information on range is displayed automatically.  
For more information on AdBlue®  
(BlueHDi engines), and, in particular,  
on topping up, refer to the corresponding  
section.  
When switching on the ignition, this warning  
lamp flashes, accompanied by the permanent  
lighting of the Service warning lamp, an audible  
signal and the display of a message ("Top  
up AdBlue: Starting impossible in x miles")  
indicating the remaining range expressed in  
miles or kilometres.  
When driving, this message is displayed every  
30 seconds until the AdBlue level has been  
topped up.  
Pressing this button temporarily displays the  
driving range.  
31  
Instruments  
The AdBlue® tank is empty: the starting  
prevention system required by legislation  
prevents starting of the engine.  
With 1.5 BlueHDi (Euro 6.2) engine  
It is essential to top up as soon as possible and  
before the tank is completely empty, otherwise  
it will not be possible to restart the engine.  
Range between 1,500 and 500 miles  
(2,400 and 800 km)  
To be able to restart the engine, it is  
essential to add at least 5 litres of AdBlue®  
to its tank.  
Remaining range less than 60 miles  
(100 km)  
Each time the vehicle is started, this warning  
lamp comes on for about 30 seconds,  
accompanied by the display of a message  
("Top up AdBlue: Starting impossible in x miles  
(km)") indicating the remaining range in miles  
or kilometres.  
The reserve level has been reached; it is  
recommended that you top up as soon as  
possible.  
For more information on AdBlue®  
(BlueHDi engines), and, in particular,  
on topping up, refer to the corresponding  
section.  
When switching on the ignition, this warning  
lamp flashes, accompanied by an audible  
signal (1 beep) and the display of a message  
("Top up AdBlue: Starting impossible in  
x miles") indicating the remaining range  
expressed in miles or kilometres.  
These messages are accompanied by the  
recommendation not to top up with more than  
10 litres of AdBlue.  
When driving, the audible signal and the  
message display are triggered every 6 miles  
(10 km) until the AdBlue tank is topped up.  
It is essential to top up as soon as possible and  
before the tank is completely empty; otherwise  
it will not be possible to restart the engine after  
the next stop.  
In the event of a fault with the SCR  
emissions control system  
Range between 500 and 60 miles (800 and  
100 km)  
An engine starting inhibition system is  
activated automatically after you have  
driven a further 685 miles (1,100 km)  
following confirmation of a fault with the  
SCR emissions control system. Have the  
system checked by a PEUGEOT dealer or  
a qualified workshop as soon as possible.  
Breakdown due to a lack of AdBlue®  
When switching on the ignition, this warning  
lamp comes on, accompanied by an audible  
signal (1 beep) and the display of a message  
("Top up AdBlue: Starting impossible in x  
miles") indicating the remaining range in miles  
or kilometres.  
When driving, the audible signal and the  
message display are triggered every 60 miles  
(100 km) until the level is topped up.  
When switching on the ignition, this warning  
lamp flashes, accompanied by an audible  
signal and the display of the message "Top up  
AdBlue: Starting impossible".  
32  
Instruments  
In the event of the detection of a fault  
(e.g. "Emissions fault: Starting prevented in  
300 miles") indicating the remaining range  
expressed in miles or kilometres.  
Lighting dimmer  
Permits manual adjustment of the brightness  
of the instrument panel to suit the exterior light  
level.  
1
While driving, the message is displayed every  
30 seconds while the fault with the SCR  
emissions control system persists.  
The alert is repeated when switching on the  
ignition.  
You should go to a PEUGEOT dealer or  
a qualified workshop as soon as possible.  
Otherwise you will not be able to restart the  
vehicle.  
These warning lamps come on, accompanied  
by an audible signal and the display of the  
message "Emissions fault".  
The alert is triggered while driving as soon  
as the fault is detected for the first time, then  
when switching on the ignition for subsequent  
journeys, while the fault persists.  
With the lamps on, press button A to increase  
the brightness of the instruments and controls  
and the vehicle's ambient lighting or button B  
to reduce it.  
Release the button when the desired level is  
reached.  
Starting prevented  
If it is a temporary fault, the alert  
disappears during the next journey,  
after self-diagnostic checks of the SCR  
emissions control system.  
Each time the ignition is switched on, these  
warning lamps come on and the AdBlue  
warning lamp flashes, accompanied by an  
audible signal and the display of the message  
"Emissions fault: Starting prevented".  
During the permitted driving phase (between  
685 and 0 miles (1,100 km and 0 km))  
You have exceeded the authorised driving  
limit: the starting prevention system does  
not allow the engine to be started.  
If a fault with the SCR system is confirmed  
(after around 30 miles (50 km) covered with the  
permanent display of the message signalling  
a fault), these warning lamps come on and the  
AdBlue warning lamp flashes, accompanied by  
an audible signal and the display of a message  
To be able to restart the engine, you must call  
on a PEUGEOT dealer or a qualified workshop.  
33  
Instruments  
Touch screen lighting  
dimmer  
Information display  
It is displayed successively.  
Reset trip  
The reset will be performed when the trip is  
displayed.  
-
-
-
-
-
-
Trip mileage.  
Range.  
F Press this button, located on the end of  
the wiper control stalk, for more than two  
seconds.  
Current fuel consumption.  
Average speed.  
Stop & Start time counter.  
Information from the speed limit recognition  
system.  
F Press the dial on the steering wheel for  
more than two seconds.  
F In the Settings menu, select "Brightness".  
F Adjust the brightness by pressing the  
arrows or moving the slider.  
F Press this button for more than two  
The brightness can be set differently for  
day mode and night mode.  
F Press this button, located on the end of the  
wiper control stalk.  
seconds.  
A few definitions…  
Range  
(miles or km)  
Trip computer  
Information displayed about the current journey  
The distance which can  
be travelled with the fuel  
remaining in the tank (at the  
average fuel consumption  
seen over the last few miles  
(kilometres) travelled).  
(range, fuel consumption, average speed, etc.).  
F Press the dial on the steering wheel.  
34  
Instruments  
Average fuel consumption  
(mpg or km/l or l/100 km)  
Setting the time and date  
Without audio system  
This value may fluctuate if a change  
of driving style or terrain results in  
a significant change in the current fuel  
consumption.  
1
Calculated since the last trip  
computer reset.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the  
range is recalculated and is displayed if it  
exceeds 62 miles (100 km).  
Average speed  
(mph or km/h)  
Calculated since the last trip  
computer reset.  
If dashes instead of figures continue  
to be displayed when driving, contact  
a PEUGEOT dealer or a qualified  
workshop.  
Distance travelled  
(miles or km)  
You can adjust the date and time in the  
instrument panel display.  
Calculated since the last trip  
computer reset.  
Current fuel consumption  
(mpg or km/l or l/100 km)  
F
F
F
F
Hold this button down.  
Calculated over the last few  
seconds.  
Stop & Start time counter  
Press one of these buttons to  
select the setting to be changed.  
(minutes/seconds or hours/minutes)  
Press this button briefly to  
confirm.  
This function is only displayed from  
19 mph (30 km/h).  
If your vehicle is fitted with Stop & Start, a time  
counter adds up the time spent in STOP mode  
during a journey.  
It resets to zero every time the ignition is  
switched on.  
Press one of these buttons to  
change the setting and confirm  
again to register the change.  
35  
Instruments  
F
Select "Setting the time-date".  
With audio system  
With PEUGEOT Connect  
Radio  
F Press the MENU button for access to the  
main menu.  
F Press the "7" or "8" button to display the  
"Personalisation-configuration" menu, then  
press OK.  
F
Select the Settings menu in  
the upper banner of the touch  
screen.  
F Select the "Date:" or "Time" tab.  
F Set the date and/or time using the numeric  
keypad.  
F Confirm with "OK".  
F
Press the "5" or "6" button to display the  
"Display configuration" menu, then press OK.  
F Select "System configuration".  
Select "Date and time".  
F
F Press the "5" or "6" button to select the  
"Date and time adjustment" button, then  
press OK.  
Additional settings  
You can choose:  
-
-
To change the time zone.  
To change the display format of the date  
and time (12h/24h).  
To activate or deactivate the summer time  
management function (+1 hour).  
To activate or deactivate the  
F Press the "7" or "8" button to select the  
setting to modify. Confirm by pressing the  
OK button.  
F Adjust the settings one by one, confirming  
with the OK button.  
F Press the "5" or "6" button, then the OK  
button to select the OK box and confirm or  
the Back button to cancel.  
F Select "Date" or "Time".  
F Choose the display formats.  
F Change the date and/or time using the  
numeric keypad.  
-
-
F Confirm with "OK".  
synchronisation with the GPS (UTC).  
With PEUGEOT Connect  
Nav  
Setting of the time and date is only available if  
synchronisation with the GPS is deactivated.  
The system does not automatically manage  
the change between winter and summer  
time (depending on the country of sale).  
F
Select the Settings menu in  
the upper or side banner of the  
touch screen.  
F Press the "OPTIONS" button to go to the  
secondary page.  
36