Access
A few seconds after switching off the ignition,
this system locks the engine control system,
therefore preventing the engine from being
started in the event of a break-in.
Locating your vehicle
Where is the integral key
of the Keyless Entry and
Starting?
This function allows you to identify your vehicle
from a distance, particularly in poor light. Your
vehicle must have been locked for more than
five seconds.
In the event of a fault, you are
informed by illumination of this
warning lamp, an audible signal and
a message in the screen.
F
Press this button.
The vehicle will not start; contact a PEUGEOT
dealer as soon as possible.
This will switch on the courtesy lamps and the
direction indicators will flash for around ten
seconds.
Back-up control(s)
If the battery is flat, attempt to lock/unlock the
vehicle as usual. If this does not work, use the
mechanical systems described below.
Also use these systems to mechanically lock/
unlock the doors in the event of:
Remote operation of lighting
F Pull and hold button 1, to extract the integral
key 2.
A short press on this button allows
you to switch on the lighting from
a distance (lighting the sidelamps,
dipped beam headlamps and number
plate lamps).
A second press on this button before
the end of the timed period cancels
the remote lighting.
Locking of the vehicle
-
-
-
-
central locking system failure,
remote control battery discharged,
remote control fault,
vehicle in an area subject to strong
electromagnetic interference.
F Insert the integral key in the driver's door
lock, then turn it to the rear.
Unlocking of the vehicle
F Insert the integral key in the driver's door
Anti-theft protection
lock, then turn it to the front.
Electronic immobiliser
The remote control contains an electronic chip
which has a special code. When the ignition is
switched on, this code must be recognised in
order for starting to be possible.
42
English