Lighting and visibility
When the lighting is switched off automatically
("AUTO" position), the foglamps and the dipped
beam headlamps will remain on.
Headlamp dipping
Lighting control stalk
Selection of main lighting
mode
With front and rear foglamps
Pull the stalk to switch between dipped and
main beam headlamps.
4
They operate with the dipped beam
headlamps on, in manual or auto
mode.
Turn the ring to align the desired symbol with
the marking.
In "AUTO" and "Sidelamps" modes, the driver
can flash the main beam headlamps by keeping
the stalk pulled.
Automatic illumination of headlamps/
Turn the ring:
Daytime running lamps.
Sidelamps only.
F once forwards to switch on the front
foglamps,
F forwards a second time to switch on the rear
foglamps,
F once backwards to switch off the rear
foglamps,
F backwards a second time to switch off the
front foglamps.
When the lighting is switched off automatically
("AUTO" position) or the dipped beams are
switched off manually, the foglamps and
sidelamps remain on.
Foglamps selection ring
Dipped or main beam headlamps.
Rear foglamps
Operation of the selected lighting is
confirmed by the illumination of the
corresponding indicator lamp.
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal surface of the
glass of the headlamps and rear lamps is
normal; it disappears after the lamps have
been on for a few minutes.
F Turn the ring backwards to switch off the
foglamps, the sidelamps will then switch off.
They operate with the sidelamps on.
F Rotate the ring forwards to switch them on
and rearwards to switch them off.
81
English