Practical information
These engines are examples provided as
a guide.
Opening
Closing
The locations of the dipstick and engine oil filler
cap may vary.
F Open the left-hand front door.
F Take the stay out of the support slot.
F Clip the stay in its housing.
F Lower the bonnet and release it near the
end of its travel.
F Pull on the bonnet to check that it is fully
latched.
1. Screenwash fluid reservoir.
2. Engine coolant reservoir.
3. Brake fluid reservoir.
4. Battery.
5. Fusebox.
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water
(rain, washing, etc.) be limited.
6. Air filter.
7. Engine oil dipstick.
8. Engine oil filler cap.
The Diesel circuit is under very high
pressure.
All work on this circuit must be carried out
only by a PEUGEOT dealer or a qualified
workshop.
Engines
Petrol
F Pull the release lever, located at the bottom
of the door aperture, towards you.
F Lift the safety catch and raise the bonnet.
F Unclip the stay
from its housing
Checking levels
Check all of these levels regularly, in line with
the manufacturer's service schedule. Top them
up if necessary, unless otherwise indicated.
If a level drops significantly, have the
and place it in the
support slot to hold
the bonnet open.
Diesel
corresponding system checked by a PEUGEOT
dealer or a qualified workshop.
The liquid must comply with the
manufacturer's recommendations and with
the vehicle's engine.
186
English