2016-2026 Peugeot Traveller Van Access -> Alarm User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Access -> Alarm for Your Peugeot Traveller Van First Generation (2016-2026)

Access  
Exterior perimeter  
Total protection  
Alarm  
The system checks for opening of the vehicle.  
The alarm is triggered if anyone tries to open  
one of the doors or the bonnet.  
Activation  
2
F
Switch off the ignition and get out of the vehicle.  
F
Lock the vehicle using the  
remote control.  
Volumetric  
The system monitors the passenger  
compartment for any variation in volume.  
The alarm is triggered if someone breaks  
the windscreen, penetrates the passenger  
compartment or moves around inside the  
vehicle.  
or  
F
Lock the vehicle using the "Keyless entry  
and Starting" system.  
System which protects and provides a deterrent  
against theft and break-ins.  
The monitoring system is active: the indicator  
lamp in the button flashes once per second  
and the direction indicators come on for about  
2 seconds.  
Following a command to lock the vehicle  
using the remote control or the Keyless entry  
and Starting system, the exterior perimeter  
monitoring is activated after a delay of  
5 seconds, the interior volumetric monitoring  
after 45 seconds.  
If an opening (door, tailgate or side-hinged  
doors, bonnet...) is not closed fully, the vehicle  
is not locked but monitoring will be activated  
after a delay of 45 seconds.  
If your vehicle is fitted with the  
programmable heating / ventilation,  
volumetric monitoring is not compatible  
with this system.  
For more information on  
Programmable Heating / Ventilation,  
refer to the corresponding section.  
Self-protection function  
The system checks for the  
disconnection of any of its components.  
The alarm is triggered if the battery,  
the button or the siren wiring is  
disconnected or damaged.  
For all work on the alarm system,  
contact a PeugeoT dealer or a  
qualified workshop.  
83  
Access  
F
Reactivate the full alarm system  
by locking the vehicle using the  
remote control or the "Keyless  
entry and starting" system.  
Deactivation  
Volumetric monitoring  
F
Press this unlocking button on  
the remote control.  
Deactivation  
F
Switch off the ignition and within  
ten seconds press this button  
until its indicator lamp is on fixed.  
or  
The indicator lamp in the button flashes once  
per second again.  
F
unlock the vehicle using the "Keyless entry  
and Starting" system.  
F
get out of the vehicle.  
Immediately lock the vehicle  
The monitoring system is deactivated: the  
indicator lamp in the button is off and the  
direction indicators flash for about 2 seconds.  
F
Triggering of the alarm  
using the remote control or the  
"Keyless entry and Starting"  
system.  
This is indicated by sounding of the siren  
and flashing of the direction indicators for  
thirty seconds.  
The monitoring functions remain active until  
the alarm has been triggered eleven times in  
succession.  
If the vehicle locks itself automatically  
(this occurs after 30 seconds if one of  
the doors is not opened), the monitoring  
system is reactivated automatically.  
only the exterior perimeter protection system is  
active: the indicator lamp in the button flashes  
once per second.  
To be effective, this deactivation must be done  
every time the ignition is switched off.  
When the vehicle is unlocked using  
the remote control or the "Keyless  
entry and Starting" system, rapid  
flashing of the indicator lamp in the  
button informs you that the alarm was  
triggered during your absence.  
When the ignition is switched on, this  
flashing stops immediately.  
Reactivation  
Protection - exterior  
perimeter monitoring only  
F
Deactivate the exterior perimeter  
monitoring by unlocking the  
vehicle using the remote control  
or the "Keyless entry and  
Starting" system.  
Deactivate the interior volumetric monitoring  
to avoid unwanted triggering of the alarm in  
certain cases such as:  
-
-
-
-
-
-
occupant(s) present in the vehicle,  
leaving a window partially open,  
washing your vehicle,  
changing a wheel,  
towing your vehicle,  
The indicator lamp in the button goes off.  
transport on a ferry.  
84  
Access  
Failure of the remote control Operating fault  
To deactivate the monitoring functions:  
When the ignition is switched on,  
F
unlock the vehicle using the key (integral  
with the remote control with Keyless entry  
and Starting) in the driver's door lock.  
open the door; the alarm is triggered.  
Switch on the ignition; the alarm stops. The  
indicator lamp in the button goes off.  
fixed illumination of the indicator  
lamp in the button indicates a fault in  
the system.  
Have it checked by a PeugeoT  
dealer or a qualified workshop.  
2
F
F
Automatic activation  
This function is either not available, an option  
or is standard.  
2 minutes after the last opening (door or boot)  
is closed, the system is activated automatically.  
Locking the vehicle without  
activating the alarm  
F
Lock or deadlock the vehicle using the  
key (integral with the remote control with  
Keyless entry and Starting) in the driver's  
door lock.  
F
To avoid triggering the alarm on entering  
the vehicle, first press the unlocking button  
on the remote control or unlock the vehicle  
using the "Keyless entry and Starting"  
system.  
85  

Related Topics

Access
Key, remote control "Keyless Entry and Starting" Locking / unlocking from inside Front doors Manual sliding side door(s) Electric sliding side door(s) General recommendations (Sliding doors) Hands-free sliding side door(s) Side-hinged rear doors Tailgate Tailgate rear screen

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot