2016-2026 Peugeot Traveller Van Audio and Telematics (Radio) -> PEUGEOT Connect Radio User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio and Telematics (Radio) -> PEUGEOT Connect Radio for Your Peugeot Traveller Van First Generation (2016-2026)

Audio and Telematics  
PeugeoT Connect Radio  
Connectivity - Multimedia audio - Bluetooth® telephone  
Contents  
First steps  
420  
Steering mounted controls  
Menus  
422  
423  
424  
434  
446  
458  
468  
Connectivity  
Radio Media  
Telephone  
Settings  
Frequently asked questions  
The system is protected in such a way that it will only operate in  
your vehicle.  
As a safety measure and because it requires sustained attention  
by the driver, the pairing of a Bluetooth mobile telephone with  
the Bluetooth hands-free system of your audio system must be  
done with the vehicle stationary and the ignition on.  
The display of the energy economy mode message signals that  
a change to standby is imminent. For more information on the  
Energy economy mode refer to the corresponding section.  
The link below gives access to oSS (open Source Software)  
codes for the system.  
ugeot-citroen.com/oss  
.
419  
Audio and Telematics  
First steps  
With the engine running, a press  
use the buttons either side of the touch screen  
for access to the menus, then press the virtual  
buttons in the touch screen. All of the touch  
areas of the screen are white.  
The touch screen is of the "capacitive"  
type.  
mutes the sound.  
With the ignition off, a press turns the  
system on.  
To clean the screen, use a soft, non-  
abrasive cloth (spectacles cloth) with  
no additional product.  
Do not use sharp objects on the  
screen.  
each menu is displayed in one or two pages  
(primary page and secondary page).  
Volume.  
Do not touch the screen with wet  
hands.  
Primary page  
Secondary page  
420  
Audio and Telematics  
Short-cuts: using the virtual buttons in the  
upper band of touch screen, it is possible to go  
directly to the selection of audio source, the list  
of stations (or titles, depending on the source),  
message notifications and emails.  
23 °C  
531 kHz  
12:13  
In the "Settings" menu you can create  
a profile for just one person or a group  
of people with common points, with the  
possibility of entering a multitude of  
settings (radio presets, audio settings,  
contact favourites, ...); these settings  
are taken into account automatically.  
Select the audio source (depending on  
version):  
-
-
-
-
FM / DAB* / AM* stations.  
Smartphone via MirrorLinkTM or CarPlay®.  
uSB memory stick.  
Media player connected to the auxiliary  
socket (jack, cable not supplied).  
Telephone connected by Bluetooth* and  
using Bluetooth* audio streaming.  
In very hot conditions, the volume may  
be limited to protect the system. It may  
go into standby (screen and sound off)  
for at least 5 minutes.  
The return to normal takes place when  
the temperature in the passenger  
compartment drops.  
-
.
* Depending on equipment.  
421  
Audio and Telematics  
Steering mounted controls  
Voice commands:  
Increase volume.  
Radio (rotate): automatic search for  
the previous / next station.  
Media (rotate): previous / next track,  
move in a list.  
Long press, smartphone voice  
commands via the system.  
Short press: Confirm a selection.  
other than selection, access to  
presets.  
Mute/ Restore the sound.  
Decrease volume.  
Media (short press): change the  
multimedia source.  
Radio: display the list of stations.  
Media: display the list of tracks.  
Radio, press and hold: update the  
list of stations received.  
Telephone (short press): call.  
Call in progress (short press):  
access to telephone menu.  
Telephone (long press): reject an  
incoming call, end call, access to  
telephone menu.  
422  
Audio and Telematics  
Menus  
Connectivity  
Telephone  
Radio Media  
23 °C  
531 kHz  
12:13  
23 °C  
87.5 MHz  
12:13  
23 °C  
531 kHz  
12:13  
FM/87.5 MHz  
87.5MHz  
operate certain applications on a smartphone  
connected via MirrorLinkTM or CarPlay®.  
Check the state of Bluetooth and Wi-Fi  
connections.  
Select an audio source, a radio station, display  
photographs.  
Connect a telephone by Bluetooth®, read  
messages and emails and send quick  
messages.  
Settings  
Driving  
23 °C  
12:13  
enter settings for a personal profile and/  
or adjust the settings for sound (balance,  
ambience, ...), and the display (language, units,  
date, time, ...).  
Activate, deactivate, adjust the settings for  
certain vehicle functions.  
.
423  
Audio and Telematics  
Connectivity  
Functionalities available according to equipment.  
Level 1  
Level 2  
Level 3  
Bluetooth connection  
2
3
23 °C  
531 kHz  
12:13  
Wi-Fi network connection  
Networks  
1
4
5
6
Connections and subscriptions to services  
Share Wi-Fi connection  
7
8
424  
Audio and Telematics  
Functionalities available according to equipment.  
Level 2  
Level 3  
Comments  
Display all telephones, connected or  
disconnected.  
All  
2
Connectivity  
Secondary page  
1
Connected  
Display all connected telephones.  
Start a search for a device to connect.  
Display secured Wi-Fi networks.  
3
Bluetooth  
connection  
Search  
Secured  
4
Connectivity  
Secondary page  
1
Not secured  
Display non-secured Wi-Fi networks.  
Display remembered Wi-Fi networks.  
5
Wi-Fi network  
connection  
Stored  
6
Connectivity  
Display the state of the subscription to connected  
services, the state of the network connection and  
the connection mode.  
Secondary page  
1
Manage connection  
Activate or deactivating the sharing of the Wi-Fi  
connection.  
Activation  
7
Connectivity  
Secondary page  
Select a Wi-Fi network found by the system and  
connect to it.  
1
Settings  
8
Share Wi-Fi  
connection  
Save settings.  
.
425  
Audio and Telematics  
Bluetooth® connection  
Procedure from the system  
Connection sharing  
As a safety measure and because it  
requires sustained attention by the  
driver, the pairing of a Bluetooth mobile  
telephone with the Bluetooth hands-  
free system of your audio system must  
be done with the vehicle stationary  
and the ignition on.  
Press "Telephone" to display the  
secondary page.  
The system offers to connect the  
telephone with 3 profiles:  
-
-
-
"Telephone" (hands-free kit, telephone  
only),  
"Streaming" (wireless play of audio files  
on the telephone),  
Press the "OPTIONS" button to go to  
the secondary page.  
1
"Mobile internet data".  
Press "Bluetooth connection".  
Select one or more profiles.  
Press "Confirm".  
Activate the Bluetooth function on the  
telephone and ensure that it is "visible  
to all" (telephone configuration).  
Select "Search".  
The list of detected telephones is  
displayed.  
Procedure from the telephone  
If the pairing procedure fails, it is recommended  
that you deactivate and then reactivate the  
"Bluetooth" function in your telephone.  
Select the name of the system in the  
list of devices detected.  
In the system, accept the connection request  
from the telephone.  
Select the name of the chosen  
telephone in the list.  
To complete the pairing, whichever  
procedure used (from the telephone or  
from the system), ensure that the code  
is the same in the system and in the  
telephone.  
Depending on the type of telephone, you  
may be asked to accept or not the transfer  
of your contacts and messages.  
426  
Audio and Telematics  
Wi-Fi connection  
Sharing the Wi-Fi connection Managing connections  
Network connection by the smartphone Wi-Fi.  
Creation of a local Wi-Fi network by the  
Press Connectivity to display the  
system.  
primary page.  
Press "Connectivity" to display the  
primary page.  
Press Connectivity to display the  
primary page.  
Press the "OPTIONS" button to go to  
the secondary page.  
1
Press the "OPTIONS" button to go to  
the secondary page.  
Press the "OPTIONS" button to go to  
the secondary page.  
Select "Manage connection".  
1
1
Select "Wi-Fi network connection".  
Select "Share Wi-Fi connection".  
With this function you can view the access  
to connected services, the availability of  
connected services and modify the connection  
mode.  
Select the "Secured", "Not secured"  
or "Stored" tab.  
Select the "Activation" tab to  
activate or deactivate sharing of the  
Wi-Fi connection.  
7
And / or  
Select a network.  
Select the "Settings" to change the  
name of the system network and the  
password.  
8
using the virtual keypad, enter the  
"Key" for the Wi-Fi network and the  
"Password".  
Press "Confirm".  
Press "Confirm" to start the  
connection.  
To protect from any piracy and provide  
maximum security for your systems,  
it is recommended that you use a  
security code or complex password.  
The Wi-Fi connection and the sharing  
of the Wi-Fi connection are exclusive.  
.
427  
Audio and Telematics  
MirrorLinkTM smartphone connection  
23 °C  
531 kHz  
12:13  
428  
Audio and Telematics  
once connection is established, a page  
As a safety measure and because it  
requires the sustained attention of  
the driver, using a smartphone when  
driving is prohibited.  
As a safety measure, applications  
can only be viewed with the vehicle  
stationary; display is interrupted once  
the vehicle is moving.  
is displayed with the applications already  
downloaded to your smartphone and adapted  
to MirrorLinkTM technology.  
operation must be with the vehicle  
stationary.  
Access to the different audio sources remains  
accessible in the margin of the MirrorLinkTM  
display, using touch buttons in the upper bar.  
Access to the menus for the system is possible  
at any time using the dedicated buttons  
The "MirrorLinkTM" function requires  
the use of a compatible smartphone  
and applications.  
When connecting a smartphone to the  
system, it is recommended that Bluetooth®  
be started on the smartphone.  
The synchronisation of a smartphone  
allows applications on a smartphone  
that are adapted to the MirrorLinkTM  
technology to be displayed in the  
vehicle's screen.  
The principles and standards  
are constantly evolving. For the  
communication process between the  
smartphone and the system to work  
correctly, the smartphone must be  
unlocked; update the operating system  
of your smartphone as well as the date  
and time in the smartphone and the  
system.  
There may be a wait for the availability  
of applications, depending on the  
quality of your network.  
Connect a uSB cable. The  
smartphone charges when  
connected by a uSB cable.  
From the system, press on  
"Connectivity" to display the primary  
page.  
Press "MirrorLinkTM" to start the  
application in the system.  
Depending on the smartphone, it may be  
necessary to activate the "MirrorLinkTM" function.  
For the list of eligible smartphones,  
connect to the brand's internet website  
in your country.  
During the procedure, several screen  
pages relating to certain functions  
are displayed.  
Accept to start and end the  
connection.  
.
429  
Audio and Telematics  
Level 1  
Level 2  
Level 3  
23 °C  
531 kHz  
12:13  
430  
Audio and Telematics  
Level 1  
Level 2  
Level 3  
Comments  
go to or return to the applications already  
downloaded to your smartphone and adapted to  
MirrorLinkTM technology.  
go to a menu list depending on the application  
chosen.  
"Back": abandon the current operation, go up  
one level.  
"Home": go to or return to the "Car mode" page  
on your smartphone.  
Connectivity  
MirrorLinkTM  
go to the primary page of the "Connectivity"  
menu.  
.
431  
Audio and Telematics  
CarPlay® smartphone connection  
23 °C  
531 kHz  
12:13  
432  
Audio and Telematics  
Connect a uSB cable. The  
smartphone charges when  
connected by a uSB cable.  
As a safety measure and because it  
requires the sustained attention of  
the driver, using a smartphone when  
driving is prohibited.  
operation must be with the vehicle  
stationary.  
on connecting the uSB cable, the  
CarPlay® function deactivates the  
system's Bluetooth® mode.  
Press "Telephone" to display the  
CarPlay® interface.  
The synchronisation of a  
or  
smartphone allows applications on a  
smartphone that are adapted to the  
CarPlay® technology to be displayed  
in the vehicle's screen, having first  
activated the CarPlay® function in your  
smartphone.  
Connect a uSB cable. The  
smartphone charges when  
connected by a uSB cable.  
As the principles and standards  
are constantly changing, it is  
recommended that you keep your  
smartphone's operating system  
updated.  
For the list of eligible smartphones, go  
to the brand's internet website in your  
country.  
In the system, press "Connectivity"  
to display the primary page.  
Press "CarPlay" to display the  
CarPlay® interface.  
.
433  
Audio and Telematics  
Radio Media  
Level 1  
Level 2  
23 °C  
87.5 MHz  
12:13  
FM/87.5 MHz  
87.5MHz  
23 °C  
87.5 MHz  
12:13  
FM/87.5 MHz  
87.5MHz  
23 °C  
531 kHz  
12:13  
AM/531 kHz  
PO  
kHz  
1
2
3
3
1
2
3
4
Radio stations  
434  
Audio and Telematics  
Level 1  
Level 2  
Comments  
Radio  
USB  
Radio Media  
Source  
iPod  
Select change of source.  
AUX  
Bluetooth  
Frequency  
Presets  
FM  
Carry out an automatic or manual search for  
radio stations.  
Radio Media  
Frequency /  
Presets  
Make a long press on an empty location to preset  
a station.  
2
3
4
Radio Media  
Band  
DAB  
Press Band to change waveband.  
AM  
Radio Media  
List  
open the list of radio stations and press on a  
radio station to select it.  
Radio stations  
.
435  
Audio and Telematics  
Level 1  
Level 2  
Audio settings  
Audio settings  
1
5
6
7
8
9
Radio-media options  
Radio settings  
5
6
7
8
9
Audio settings  
10  
11  
Radio stations  
5
6
7
8
9
12  
13  
14  
15  
436  
Audio and Telematics  
Level 1  
Level 2  
Comments  
Ambience  
Distribution  
Sound  
Select the sound ambience.  
5
6
7
8
9
Sound distribution by the Arkamys® system.  
Radio Media  
Secondary page  
Audio settings  
Adjust the volume or activate volume linked to  
speed.  
1
1
Voice  
Adjust the voice volume.  
Adjust the ringtone volume.  
Save settings.  
Ringtone  
Confirm  
General  
Announcements  
Confirm  
FM  
Radio Media  
Secondary page  
Radio settings  
10  
11  
Activate or deactivate settings.  
Save settings.  
12  
13  
14  
15  
Display the list of radio stations for the band  
selected.  
DAB  
Radio Media  
Secondary page  
Radio stations  
AM  
Presets  
Frequency  
Select a preset radio station.  
1
enter a frequency manually.  
Change the screen display mode.  
update the list according to reception.  
.
437  
Audio and Telematics  
Level 1  
Level 2  
1
Radio-media options  
USB  
16 17 18 19 20  
Photos  
21  
438  
Audio and Telematics  
Level 1  
Level 2  
Comments  
Albums  
Artists  
16  
17  
Radio Media  
Secondary page  
Music files  
Genres  
Playlists  
Folders  
Choose a selection mode.  
18  
19  
20  
1
1
Radio Media  
Secondary page  
Managing photos  
Display photos.  
The system supports the following image  
formats: .gif, .jpg, .jpeg, .bmp, .png, .raw and .tiff  
with a maximum file size of 10 Mb per image.  
USB  
21  
.
439  
Audio and Telematics  
Radio  
Selecting a station  
Preset a station  
Press Radio Media to display the  
menu.  
Press "Frequency".  
Select a radio station or frequency (refer to the  
corresponding section).  
2
Press "Presets".  
Press "Frequency".  
enter the values using the virtual  
keypad.  
First enter the units then click on the  
decimals zone to enter the figures  
after the decimal point.  
2
2
Make a long press on one of the  
buttons to preset the station.  
Press one of the buttons for an  
automatic search for radio stations.  
Press "Confirm".  
or  
or  
Move the cursor for a manual search  
for frequencies up or down.  
Radio reception may be affected by  
the use of electrical equipment not  
approved by the brand, such as a uSB  
charger connected to the 12 V socket.  
The exterior environment (hills,  
buildings, tunnel, car park, below  
ground...) may prevent reception,  
even in RDS station tracking mode.  
This phenomenon is normal in the  
propagation of radio waves and is in no  
way indicative of a fault with the audio  
system.  
Press Radio Media to display the  
primary page.  
Press the "OPTIONS" button to go to  
the secondary page.  
1
Select "Radio stations" in the  
secondary page.  
440  
Audio and Telematics  
Activate/ Deactivate RDS  
Display text information  
Play TA messages  
Press Radio Media to display the  
primary page.  
The "radiotext" function allows  
information transmitted by the radio  
station and related to the station or the  
song playing to be displayed.  
The TA (Traffic Announcement)  
function gives priority to TA alert  
messages. To operate, this function  
needs good reception of a radio station  
that carries this type of message. While  
traffic information is being broadcast,  
the current media is automatically  
interrupted so that the TA message can  
be heard. Normal play of the media  
previously playing is resumed at the  
end of the message.  
Press the "OPTIONS" button to go to  
the secondary page.  
1
Select "Radio settings".  
Press Radio Media to display the  
primary page.  
Select "General".  
10  
Press the "OPTIONS" button to go to  
the secondary page.  
1
Activate/deactivate "Station follow".  
Select "Radio settings".  
Press "Confirm".  
Select "General".  
Select "Announcements".  
10  
11  
RDS, if activated, allows you to continue  
listening to the same station by automatic  
retuning to alternative frequencies.  
However, in certain conditions, coverage  
of an RDS station may not be assured  
throughout the entire country as radio  
stations do not cover 100 % of the  
Activate / Deactivate "Display radio  
text".  
Activate / Deactivate "Traffic  
announcement".  
Press "Confirm".  
Press "Confirm".  
territory. This explains the loss of  
reception of the station during a journey.  
.
441  
Audio and Telematics  
DAB radio (Digital Audio Broadcasting)  
Terrestrial Digital Radio  
Display of the name of the current station  
and "multiplex" being listened to, also  
called an "ensemble".  
Select audio source.  
Previous "Multiplex".  
Previous radio station.  
Display "Radiotext" for the  
current station.  
Display of options:  
if active but not available,  
the display will be greyed  
out.  
Next "multiplex".  
Next radio station.  
if active and available, the  
display will be clear.  
Display of the list of radio  
stations.  
Secondary page.  
Change of band.  
Switch between the page with the presets and the page  
with the frequencies.  
If the current "DAB" station is not available on  
"FM" the "DAB/FM" option is greyed out.  
442  
Audio and Telematics  
Digital radio  
DAB / FM auto tracking  
Digital radio provides higher quality  
reception.  
The different multiplexes offer a  
choice of radio stations arranged in  
alphabetical order.  
"DAB" does not cover 100% of the  
territory.  
If "DAB / FM auto tracking" is activated,  
there is a difference of a few seconds  
when the system switches to "FM"  
analogue radio with sometimes a  
variation in volume.  
once the digital signal is restored, the  
system automatically changes back to  
"DAB".  
When the digital radio signal is poor,  
"DAB/FM auto tracking" allows you to  
continue listening to the same station,  
by automatically switching to the  
corresponding "FM" analogue station  
(if there is one).  
Press Radio Media to display the  
primary page.  
Press Radio Media to display the  
primary page.  
If the "DAB" station being listened to  
is not available on "FM" ("DAB/FM"  
option greyed out), or "DAB/FM auto  
tracking" is not activated, the sound  
will cut out while the digital signal is too  
weak.  
Press the "OPTIONS" button to go to  
the secondary page.  
Select the audio source.  
1
Select "Radio settings".  
Press "Band" to select the "DAB"  
waveband.  
3
Select "General".  
10  
Activate / Deactivate "Station  
follow".  
Press "Confirm".  
.
443  
Audio and Telematics  
Media  
USB player  
Auxiliary (AUX) socket  
Selecting the source  
Press Radio Media to display the  
primary page.  
Select "Source".  
Choose the source.  
Bluetooth® audio streaming  
Insert the uSB memory stick into the uSB port  
or connect the uSB device to the uSB port  
using a suitable cable (not supplied).  
This source is only available if "Auxiliary input"  
has been checked in the audio settings.  
Streaming allows you to listen to music from  
your telephone.  
The system builds playlists (in temporary  
memory), an operation which can take from  
a few seconds to several minutes at the first  
connection.  
Reduce the number of non-music files and the  
number of folders to reduce the waiting time.  
The playlists are updated every time the  
ignition is switched off or connection of a uSB  
memory stick. The lists are memorised: if they  
are not modified, the subsequent loading time  
will be shorter.  
Connect the portable device (MP3 player…) to  
the auxiliary Jack socket using an audio cable  
(not supplied).  
The Bluetooth profile must be activated. First  
adjust the volume on your portable device  
(to a high level).  
Then adjust the volume of your audio system.  
First adjust the volume of your portable device  
(to a high level). Then adjust the volume of your  
audio system.  
Display and management of the controls are  
via the portable device.  
If play does not start automatically, it may be  
necessary to start the audio playback from the  
telephone.  
Control is from the portable device or by using  
the audio system buttons.  
once connected in streaming mode,  
the telephone is considered to be a  
media source.  
444  
Audio and Telematics  
Connecting Apple® players  
Information and advice  
Connect the Apple® player to the uSB port  
using a suitable cable (not supplied).  
Play starts automatically.  
The audio equipment will only play audio files  
with ".wma, .aac, .flac, .ogg and .mp3" file  
extensions and with a bit rate of between  
32 Kbps and 320 Kbps.  
It also supports VBR (Variable Bit Rate) mode.  
No other type of file (.mp4, ...) can be played.  
".wma" files must be of the standard wma 9 type.  
The sampling rates supported are 32, 44 and  
48 KHz.  
The system supports uSB mass  
storage devices, BlackBerry® devices  
or Apple® players via uSB ports. The  
adaptor cable is not supplied.  
Control is via the audio system.  
Control of the peripheral device is with  
the audio system controls.  
other peripherals, not recognised on  
connection, must be connected to the  
auxiliary socket using a Jack cable (not  
supplied) or via Bluetooth streaming,  
depending on compatibility.  
The classifications available are those  
of the portable device connected  
(artists / albums / genres / playlists /  
audiobooks / podcasts).  
The default classification used is by  
artist. To modify the classification used,  
return to the first level of the menu  
then select the desired classification  
(playlists for example) and confirm  
to go down through the menu to the  
desired track.  
It is advisable to restrict file names to  
20 characters, without using of special  
characters (e.g.: " " ? ; ù) to avoid any playing  
and displaying problems.  
use only uSB memory sticks formatted FAT 32  
(file allocation table).  
It is recommended that the uSB cable  
for the portable device is used.  
The version of software in the audio system  
may not be compatible with the generation of  
your Apple® player.  
.
445  
Audio and Telematics  
Telephone  
Level 1  
Level 2  
Level 3  
23 °C  
531 kHz  
12:13  
Contacts and favourites  
1
Known devices  
4
5
6
7
12  
13  
14  
23 °C  
531 kHz  
12:13  
Recent calls  
1
2
3
8
9
10  
11  
446  
Audio and Telematics  
Level 1  
Level 2  
Level 3  
Comments  
All  
4
5
6
7
View contacts according to presentation choices.  
Select a contact or a favourite saved in the  
system via the profile selected to start the call.  
Telephone  
Address  
Favourites  
Sort the contacts by Surname-First name or First  
name-Surname.  
Telephone  
Bluetooth  
Contact  
update the contacts from the telephone.  
Search for a contact in the directory.  
2
Search  
Create  
Confirm  
Telephone  
Address  
email  
12  
13  
14  
Create a new contact in the system.  
Confirm  
All  
8
9
Telephone  
Bluetooth  
Calls  
Incoming  
Outgoing  
Missed  
View calls according to choice of presentation.  
Select a contact to start the call.  
10  
11  
3
View details for the contact.  
.
447  
Audio and Telematics  
Level 1  
Level 2  
Bluetooth connection  
1
15  
16  
Settings - Bluetooth  
Messages  
17  
18  
19  
Email  
20  
21  
22  
448  
Audio and Telematics  
Level 1  
Level 2  
Comments  
Display all telephones, connected or  
disconnected, recognised by the system.  
All  
15  
16  
Telephone  
Secondary page  
1
1
Connected  
Search  
All  
Display all connected telephones.  
Bluetooth  
connection  
Start the search for a device to connect.  
17  
18  
19  
20  
Telephone  
Secondary page  
Messages  
Received  
Sent  
Display messages according to the choice made.  
Received  
Sent  
Telephone  
Secondary page  
Email  
21  
22  
Display emails according to the choice made.  
1
Not read  
Mailbox  
.
449  
Audio and Telematics  
Level 1  
Level 2  
Options  
1
Settings - Bluetooth  
Options  
23 24 25 26  
23 24 25 26  
Quick messages  
27  
28  
29  
30  
450  
Audio and Telematics  
Level 1  
Level 2  
Comments  
Security  
Voicemail  
Ringtone  
Statistics  
Confirm  
Delayed  
My arrival  
Not available  
Other  
Make driving safe.  
23  
24  
25  
enter and save the number for the telephone  
voicemail.  
Telephone  
Secondary page  
Options  
Adjust the ringtone volume.  
Display data for the telephone connected.  
Save the options.  
1
26  
27  
28  
Telephone  
Select a quick message from the categories,  
as required.  
Secondary page  
Quick messages  
1
29  
30  
Create  
Create a quick message.  
.
451  
Audio and Telematics  
Pairing a Bluetooth® telephone  
Procedure from the system  
Connection sharing  
As a safety measure and because it  
requires sustained attention by the  
driver, the pairing of a Bluetooth mobile  
telephone with the Bluetooth hands-  
free system of your audio system must  
be done with the vehicle stationary  
and the ignition on.  
Press Telephone to display the  
primary page.  
The system offers to connect the telephone  
with 3 profiles:  
-
-
-
Telephone (hands-free kit, telephone  
only),  
Streaming (wireless play of audio files on  
the telephone),  
Press Connect telephone.  
Mobile internet data.  
or.  
Select one or more profiles.  
Press "Confirm".  
Select "Search".  
The list of telephones detected is  
displayed.  
Activate the Bluetooth function on the  
telephone and ensure that it is "visible  
to all" (telephone configuration).  
If the pairing procedure fails, it is  
recommended that you deactivate and  
then reactivate the "Bluetooth" function  
in your telephone.  
Procedure from the telephone  
Select the system name in the list of  
devices detected.  
Depending on the type of telephone,  
you may be asked to accept or not  
the transfer of your contacts and  
messages.  
Select the name of the chosen  
telephone in the list.  
In the system, accept the connection request  
from the telephone.  
To complete the pairing, whichever  
procedure used (from the telephone or  
from the system), ensure that the code  
is the same in the system and in the  
telephone.  
452  
Audio and Telematics  
Automatic reconnection  
To modify the connection profile:  
The ability of the system to connect  
with just one profile depends on the  
telephone.  
on return to the vehicle, if the last  
telephone connected is present again,  
it is automatically recognised and  
within about 30 seconds of switching  
on the ignition, the connection is  
established without any action on your  
part (Bluetooth activated).  
Press Telephone to display the  
primary page.  
All three profiles may connect by default.  
Press the "OPTIONS" button to go to  
the secondary page.  
1
The services available depend on  
the network, the SIM card and the  
compatibility of the Bluetooth devices  
used. Check in your telephone's  
manual and with your service provider  
for the services available to you.  
Select "Bluetooth connection" to  
display the list of paired devices.  
Press the "details" button.  
Select one or more profiles.  
The profiles compatible with the system  
are HFP, oPP, PBAP, A2DP, AVRCP,  
MAP and PAN.  
Press on "Confirm".  
go to the brand's website for more information  
(compatibility, additional help, ...).  
.
453  
Audio and Telematics  
Managing paired telephones  
Deleting a telephone  
Receiving a call  
Select the basket at top right of the  
screen to display a basket alongside  
the telephone chosen.  
An incoming call is announced by a ring and a  
superimposed display in the screen.  
This function allows the connection or  
disconnection of a peripheral device as  
well as the deletion of a pairing.  
Make a short press on the steering  
mounted TEL button to accept an  
incoming call.  
Press the basket alongside the  
telephone chosen to delete it.  
Press Telephone to display the  
primary page.  
And  
Press the "OPTIONS" button to go to  
the secondary page.  
Make a long press  
1
on the steering mounted TEL button  
to reject the call.  
Select "Bluetooth connection" to  
display the list of paired peripheral  
devices.  
or  
Press on the name of the telephone  
chosen in the list to disconnect it.  
Press again to connect it.  
Select "End call".  
454  
Audio and Telematics  
Making a call  
Calling a contact  
Calling a recently used number  
Press Telephone to display the  
primary page.  
using the telephone is not  
recommended while driving.  
Park the vehicle.  
Make the call using the steering  
mounted controls.  
Press Telephone to display the  
primary page.  
or make a long press  
or  
Make a long press  
on the steering mounted TEL button.  
Select "Contact".  
on the steering mounted button.  
Calling a new number  
Press Telephone to display the  
primary page.  
2
Select "Calls".  
Select the desired contact from the list offered.  
enter the phone number using the  
digital keypad.  
3
Select "Call".  
Select the desired contact from the list offered.  
Press "Call" to start the call.  
It is always possible to make a call  
directly from the telephone; as a safety  
measure, first park the vehicle.  
.
455  
Audio and Telematics  
Managing contacts / entries  
Managing messages  
Press Telephone to display the  
primary page.  
Press Telephone to display the  
primary page.  
The access to "Messages" depends on  
the compatibility of the smartphone and  
the integral system.  
Depending on the smartphone, access  
to your messages or email may be  
slow.  
Select "Contact".  
Press the "OPTIONS" button to go to  
the secondary page.  
2
1
Select "Create" to add a new contact.  
Select "Messages" to display the list  
of messages.  
The services available depend on  
the network, the SIM card and the  
compatibility of the Bluetooth devices  
used.  
Check in the manual for your telephone  
and with your service provider for the  
services available to you.  
Select the "All" or "Received" or  
"Sent" tab.  
In the "Telephone" tab, enter the  
telephone numbers for the contact.  
12  
Select the detail of the message  
chosen in one of the lists  
In the "Address" tab, enter the  
addresses for the contact.  
13  
Press "Answer" to send a quick  
message stored in the system.  
In the "Email" tab, enter the email  
addresses for the contact.  
14  
Press "Call" to start the call.  
The "Email" function allows email  
addresses to be entered for a contact,  
but the system is not able to send  
emails.  
Press "Play" to hear the message.  
456  
Audio and Telematics  
Managing quick messages  
Managing email  
Press Telephone to display the  
primary page.  
Press this button to "Modify" the new  
quick message(s) created.  
Press Telephone to display the  
primary page.  
Press on the "OPTIONS" button to  
go to the secondary page.  
Press the "OPTIONS" button to go to  
the secondary page.  
The "Modify" function does not apply  
to quick messages already present in  
the system.  
1
1
Select "Messages" to display the list  
of messages.  
Select "Email" to display the list of  
messages.  
Select the "Delayed" or "My arrival"  
or "Not available" or "Other" tab  
with the possibility of creating new  
messages.  
Select the "Received" or "Sent" or  
"Not read" tab.  
Select the email chosen in the list.  
Press "Play" to hear the email.  
Press "Create" to write a new  
message.  
Select the message chosen in one of  
the lists.  
Access to "Email" depends on the  
compatibility of the smartphone and the  
integral system.  
Press "Transfer" to select the  
addressee(s).  
Press "Play" to play the message.  
.
457  
Audio and Telematics  
Settings  
Level 1  
Level 2  
Audio settings  
Audio settings  
3
4
5
6
7
3
4
5
6
7
23 °C  
12:13  
Audio settings  
1
2
3
4
5
6
7
458  
Audio and Telematics  
Level 1  
Level 2  
Comments  
Ambience  
Distribution  
Sound  
Select the sound ambience.  
3
4
Sound distribution by the Arkamys© system.  
Adjust the volume or activate volume linked to  
speed.  
Settings  
5
6
7
Audio settings  
Voice  
Adjust the voice volume.  
Adjust the ringtone volume.  
Save the settings.  
Ringtone  
Confirm  
Settings  
Function allowing the display to be switched off.  
Pressing the screen reactivates it.  
Turn off screen  
Settings  
Activate the profile selected.  
Profile (1, 2, 3)  
2
.
459  
Audio and Telematics  
Level 1  
Level 2  
Level 3  
Screen configuration  
Screen configuration  
1
8
9
8
9
Settings and tools  
System settings  
Information  
10  
11  
12  
Languages  
13 14 15 16  
460  
Audio and Telematics  
Level 1  
Settings  
Level 2  
Animation  
Level 3  
Comments  
Activate or deactivate settings.  
Adjust the level of brightness.  
Save the settings.  
8
9
Secondary page  
Brightness  
Confirm  
1
1
Screen  
configuration  
Distance and fuel  
consumption  
Set the units used for distance, fuel consumption  
and temperature.  
Units  
10  
11  
12  
Temperature  
Settings  
Factory settings  
System info  
Reinitialize  
Return to the factory settings.  
Secondary page  
System settings  
View the versions of the different modules  
(system, mapping, risk areas) installed in the  
system as well as the updates available.  
View  
Confirm  
All  
Save the settings.  
13  
14  
15  
16  
Europe  
Asia  
Settings  
Secondary page  
Languages  
Select the language then confirm.  
1
America  
Confirm  
Having selected the language, save the setting.  
.
461  
Audio and Telematics  
Level 1  
Level 2  
Level 3  
Setting the time-date  
1
17  
18  
Settings and tools  
Setting of the profiles  
19 20 21 22  
462  
Audio and Telematics  
Level 1  
Level 2  
Level 3  
Comments  
Date  
Date  
Time  
enter the date and select the date format.  
17  
18  
Date format:  
Time  
Settings  
Set the time.  
Secondary page  
1
Time Zone  
Time format:  
Define the time zone.  
Setting the  
time-date  
Select the time format: 12h / 24h.  
Activate or deactivate synchronisation with gPS.  
Save the settings.  
Synchronisation with  
gPS (uTC):  
Confirm  
Profile 1  
19  
20  
Settings  
Profile 2  
enter settings for the profiles.  
Secondary page  
1
Profile 3  
21  
22  
Setting of the  
profiles  
Common profile  
Confirm  
Save the settings.  
.
463  
Audio and Telematics  
Audio settings  
Profile settings  
Press Settings to display the primary  
page.  
The sound distribution (or spatialisation  
with the Arkamys© system) is audio  
processing that allows the quality of the  
sound to be adapted according to the  
number of passengers in the vehicle.  
Available only with the 6-speaker  
configuration.  
As a safety measure and because it  
requires the sustained attention of the  
driver, changes to settings must only be  
done with the vehicle stationary.  
Select "Audio settings".  
Select "Ambience"  
"Position"  
Press Settings to display the primary  
page.  
3
4
5
6
7
The audio Ambience settings  
(6 ambiences available) as well as the  
Bass, Medium and Treble settings  
are different and independent for each  
sound source.  
or  
Press the "OPTIONS" button to go to  
the secondary page.  
1
Select "Setting of the profiles".  
Select "Profile 1", "Profile 2",  
or  
or  
or  
Activate or Deactivate "Loudness".  
"Sound"  
"Voice"  
The settings for "Position" (All  
passengers, Driver and Front only) are  
common to all sources.  
"Profile 3" or "Common profile".  
19  
Activate or Deactivate "Touch tones",  
"Volume linked to speed" and  
"Auxiliary input".  
Press this button to enter a name for  
the profile using the virtual keypad  
"Ringtone".  
Press "Confirm".  
on-board audio: Arkamys© Sound  
Staging optimises the distribution of  
sound in the passenger compartment.  
Press "Confirm" to save the settings.  
464  
Audio and Telematics  
Press this button to add a photograph  
to the profile.  
Press this button to initialise the  
profile selected.  
Select a "Profile" (1 or 2 or 3) to  
associate the "Audio settings" with it.  
2
Select "Audio settings".  
Insert a uSB memory stick containing  
the photograph in the uSB port.  
Select the photograph.  
Initialisation of the profile selected  
activates the english language by default.  
Select "Ambience".  
"Distribution".  
Press "Confirm" to accept the  
transfer of the photograph.  
3
4
5
6
7
or  
Press "Confirm" again to save the  
settings.  
or  
or  
or  
"Sound".  
"Voice".  
The location for the photograph is  
square; the system deforms the original  
photograph if in another format.  
"Ringtone".  
Press "Confirm" to save the settings.  
.
465  

Related Topics

Audio and Telematics (Radio)
Frequently asked questions

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot