2002-2010 Porsche Cayenne SUV Air Conditioning, Parking Heater and Heated Rear Window -> Automatically controlled 4-zone air conditioning User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Air Conditioning, Parking Heater and Heated Rear Window -> Automatically controlled 4-zone air conditioning for Your Porsche Cayenne SUV First Generation (2002-2010)

74 Air Conditioning, Parking Heater and Heated Rear Window
Automatically controlled 4-zone
air conditioning
Depending on various factors (e.g. ambient
temperature, sunlight, air quality), the air-condi-
tioning system controls the preset interior temper-
ature fully automatically.
Temperature, air quantity and air distribution can
be set individually/separately for the four air-
conditioned areas front left, front right, rear left
and rear right.
You can manually influence the automatic system.
The individual adjustment is shown on the air-con-
ditioning display.
Note on operation
The air conditioner settings are stored on the
respective remote control when switching off the
ignition and locking the vehicle. The “Air flow OFF”
setting is stored for approx. 60 minutes and the
“Recirculated air” setting is stored for approx.
20 minutes.
Control panel, front
A - Windscreen defrost
B - Heated rear window
C - AUTO button (automatic mode),
REST button (engine residual heat)
D - Recirculated air, automatic recirculated air
E - Air-conditioning display
F - T emperatur e sensor
G - Air quantity button, left
H - Temperature button, left
I - Air to windscreen, left
J - Air to footwell, left
K - Air to left central and side vents
L - Setting for rear air-conditioned areas
M- ECON button (air-conditioning compressor off/on)
N - Air to right central and side vents
O - Air to footwell, right
P - Air to windscreen, right
Q - Temperature button, right
R - Air quantity button, right
Air Conditioning, Parking Heater and Heated Rear Window 75
You can switch the front and rear air-conditioned
areas to automatic mode independently of each
other.
f Press AUTO button C on the front or rear
control panel.
The indicator light in button C of the front
control panel and the AUTO indicator in the
rear display panel light up.
Air quantity and distribution are automatically
controlled and variations are compensated.
Note on operation
If necessary, the automatic system can be manu-
ally influenced.
This manual setting is retained until the appropri-
ate function button is pressed again or the AUTO
button C is pressed.
Switching automatic mode on/off
Control panel, rear
C - AUTO button (automatic mode)
F - Air-conditioning/seat heating display
G - Air quantity button, left
H - Temperature button, left; seat heating, left
I - Air to vent, left door pillar
D - Air to footwell, left
K - Air to left central vent (centre console)
O - Seat heating off/on
P - Air to vent, right door pillar
Q - Air to footwell, right
R - Air to right central vent
(centre console right)
S - Temperature button, right; seat heating, right
T - Air quantity button, right
76 Air Conditioning, Parking Heater and Heated Rear Window
Setting temperature
To suit personal comfort, the interior temperature
can be adjusted individually between 16 °C and
29.5 °C for each of the four air-conditioned areas.
Recommendation: 22 °C.
The selected temperature is shown on the display
above the button.
Increase temperature
f Press button for temperature up.
Left air-conditioned area at front: button H
Right air-conditioned area at front: button Q
Left air-conditioned area at rear: button H
Right air-conditioned area at rear: button S
Reduce temperature
f Press button for temperature down.
Left air-conditioned area at front: button H
Right air-conditioned area at front: button Q
Left air-conditioned area at rear: button H
Right air-conditioned area at rear: button S
If “LO” or “HI” appears on the display, the system
is operating at maximum cooling or heating
power.
If the preselected temperature is changed, the air
quantity blowing out can adjust automatically in
automatic mode.
The desired temperature is reached more quickly
this way.
The air quantity can be selected individually for
each of the four air-conditioned areas.
The selected air quantity is shown in a bar display
on the display above the button. The more bars
that are displayed, the more air flows into the inte-
rior.
Increase air quantity
f Press button for air quantity up.
Left air-conditioned area at front: button G
Right air-conditioned area at front: button R
Left air-conditioned area at rear: button G
Right air-conditioned area at rear: button T
Reduce air quantity
f Press button for air quantity down.
Left air-conditioned area at front: button G
Right air-conditioned area at front: button R
Left air-conditioned area at rear: button G
Right air-conditioned area at rear: button T
Press AUTO button C to return to automatic
mode.
If the air quantity was reduced at the front control
panel so much that “OFF” appears on the display,
the supply of air from the outside is interrupted.
Warning!
Risk of accident due to impaired vision
caused by misted windows. The windows may
mist up in the air quantity setting “OFF”.
f Press button G up (increase air quantity).
Setting air quantity
Air Conditioning, Parking Heater and Heated Rear Window 77
Setting air distribution
The air quantity can be selected individually for
each of the four air-conditioned areas.
– Front control panel:
The air flows to the windscreen.
– Rear control panel:
The air flows to the corresponding side
window.
f Press button .
f Press button .
– Front control panel:
The air flows from the front central and side
vents.
– Rear control panel:
The air flows to the central vents.
f Vents must be open.
f Push button forward or back.
The air flows to the footwell.
Ending air distribution functions
f Press corresponding button again or press
AUTO C button.
Accepting settings for driver’s side for the
entire vehicle
The Mono function allows the temperature and air
quantity settings for the driver’s side to be
accepted for the entire vehicle.
Switching on MONO function
f Press button on the front control panel
for 2 seconds.
The text MONO appears on the air-conditioning
display.
Ending MONO function
f Press button on the front control panel
for 2 seconds or
f Change the settings in the air-conditioned
areas.
f Press button on the front control panel.
The indicator light in the button lights up.
The air flows to the windscreen and the front
side windows.
The windscreen is demisted or defrosted as
quickly as possible.
Ending the function
f Press button again or
f Press button .
f Press button on the front control
panel once.
The indicator light in the button lights up.
Control of the outside-air supply depends on
the air quality.
Note
The recommended operating mode is automatic
circulating-air mode.
Air to the windscreen and side
windows
Air to central and side vents
Air to footwell
Defrosting windscreen
Switching on automatic
circulating-air mode
78 Air Conditioning, Parking Heater and Heated Rear Window
Warning!
Risk of accident due to impaired vision.
In circulating-air mode, the windows may
mist up.
f Only select circulating-air mode for short
periods.
f If the windows mist up, switch circulating-air
mode off immediately by pressing the circu-
lating-air button again and select the “Defrost
windscreen” function.
f Press button on the front control panel
twice.
The indicator light in the button lights up.
The outside-air supply is interrupted and only
the inside air is circulated.
Note on operation
If the air-conditioning compressor is switched off
manually or automatically, circulating-air mode
ends after approx. 3 minutes.
ECON mode
Warning!
Risk of accident due to impaired vision.
The outside air that is flowing in is not dried
in Econ mode. The windows may mist up.
f Do not switch on ECON mode in damp
weather.
In ECON mode, the air-conditioning compressor is
switched off and this deactivates the cooling
function (e.g. to save fuel).
The air-conditioning compressor is always
switched off at temperatures below 3 °C.
Switching on ECON mode
f Press button .
The text ECON appears on the air-conditioning
display.The air-conditioning compressor is
switched off.
Switching off ECON mode
– If the interior temperature is too high,
press button or
Press button .
The text ECON disappears from the air-condi-
tioning display.
The air-conditioning compressor is switched
on.
Using engine residual heat
The residual heat of the engine can be used to
heat the interior for up to 20 minutes after the
ignition has been switched off.
f Press button on the front control
panel.
The air-conditioning settings cannot be
changed in REST mode.
Ending the function
f Press button .
Note on operation
If the battery voltage is too low, REST mode is
automatically ended.
Sensors
To avoid affecting the performance of the air-
conditioning system:
f Do not cover the sun sensor on the dashboard
and the temperature sensor F in the front
control panel of the air-conditioning system.
Switching on circulating-air mode
REST mode
Air Conditioning, Parking Heater and Heated Rear Window 79
Information on air-conditioning
compressor
The air-conditioning compressor:
– May switch off briefly to ensure sufficient
engine cooling if the engine is operating under
extreme load.
– Switches off automatically at temperatures
below approx. 3 °C and cannot be switched
on, even manually.
– Operates most effectively with the windows
closed.
If the vehicle has been in the sun for a long
time, it is a good idea to ventilate the interior
briefly with the windows open.
– Depending on the outside temperature and
humidity, condensation can drip from the
evaporator and form a pool under the car.
This is normal and not a sign of leakage.
f If uncooled air flows out when the lowest
temperature has been set (“LO”), switch off the
air-conditioning compressor and have the fault
remedied.
Consult a qualified specialist workshop. We
recommend that you use a Porsche partner for
this work since these are staffed with trained
personnel and have the necessary parts and
tools.
Disabling control panel for rear
air-conditioned areas
The power windows and central locking buttons on
the rear doors and the rear control panel for the
air conditioning can be disabled by means of the
safety button in the armrest of the driver’s door.
f Press the safety button to switch child
protection on and off.
The symbol in the safety button lights up if
child protection is active.
f Press button .
The symbol appears on the display.
The rear air-conditioned areas can be
controlled from the front control panel.
Ending the function
f Press button again.
Note on operation
f The function is ended automatically
10 seconds after the last settings are made.
Seat heating, rear
The rear seats can also be heated in vehicles with
four-zone air conditioning.
f For further information on operating the seat
heating:
Please observe the chapter “REAR SEAT HEAT-
ING FOR VEHICLES WITH 4-ZONE AIR CONDI-
TIONING” on Page 38.
Switching child protection on/off
Controlling rear air-conditioned
areas with the front control panel

Related Topics

Popular Owner Manuals