2002-2010 Porsche Cayenne SUV Luggage Compartment, Loadspace and Storage User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Luggage Compartment, Loadspace and Storage for Your Porsche Cayenne SUV First Generation (2002-2010)

Luggage Compartment, Loadspace and Storage 219
Luggage Compartment, Loadspace and Storage
Folding rear seats forward
and returning to upright position.................. 220
Loadspace ................................................ 223
Cargo management system ........................ 224
Stowing load.............................................. 227
Luggage compartment cover ...................... 228
Luggage safety net .................................... 229
Ski bag...................................................... 231
Roof Transport System............................... 233
Storage..................................................... 234
Cupholder.................................................. 238
DVD player under the right front seat ........... 239
Ashtray, front ............................................ 240
Cigarette lighter ......................................... 241
220 Luggage Compartment, Loadspace and Storage
Folding rear seats forward and
returning to upright position
The rear seats are divided and can be folded
forward individually to make the loadspace bigger.
Caution!
Risk of damage to seat cushions, backrest
and seat belt if only the backrest is folded
forward.
f Always fold seat cushions and backrest
forward.
Folding rear seats forward
If the luggage safety net is installed, always first
move the left seat cushion to a vertical position
and fold the left rear seat backrest forward.
On vehicles with automatically controlled
four-zone air conditioning:
f Press the safety button in the driver’s door
armrest before folding the rear seats forward.
The rear control panel for the air conditioning
is deactivated.
This prevents unintentional adjustment of the
air conditioning.
The symbol in the switch lights up.
1. Move front seats forward.
2. Remove the headrests of the backrest to be
folded forward.
To do this:
Please observe the chapter “HEADRESTS” on
Page 36.
3. Pull seat cushion up at loop A.
Safety button
Luggage Compartment, Loadspace and Storage 221
4. Raise seat cushion vertically. 5. Pull release lever A and fold the backrest
forward.
6. Insert support bracket of the backrest in the
support hook on the seat cushion (arrow).
222 Luggage Compartment, Loadspace and Storage
7. Insert headrest into the mounting in the seat
cushion.
Adjusting rear seats to vertical position
1. Remove the headrests from the seat cushion.
2. Make sure that the seat belts are not trapped.
Fold up the backrest until it locks with an
audible click.
The red “check tab” A must be lowered
completely.
Warning!
Danger of injury and/or damage as a result
of braking or in the event of an accident.
f Do not place any objects between the seat
cushion and foam part.
3. Fold seat cushion back and press down at the
rear.
Make sure that the belt buckles are accessible.
4. Insert the headrests into the backrest.
To do this:
Please observe the chapter “HEADRESTS” on
Page 36.
Luggage Compartment, Loadspace and Storage 223
Loadspace
The maximum permissible load on the loadspace
floor is 400 kg. The weight must be distributed
evenly over the entire loadspace.
f For information on stowing loads and luggage:
Please observe the chapter “STOWING LOAD”
on Page 227.
Opening loadspace floor
1. Pull handle A and lift the loadspace floor.
2. Unclip support arm B and insert it into fixing
recess C in the loadspace floor.
Closing loadspace floor
1. Lift the loadspace floor and clip support arm B
into its holder in the vehicle floor.
2. Close the loadspace floor.
Tie-down rings
You can secure the load in the luggage compart-
ment against slipping. Tie-down straps or the
luggage net can be fastened to the tie-down
rings D.
f Make sure that all rings are equally loaded
when securing a load.
Note on operation
The tie-down rings are not designed to restrain a
heavy load in an accident.
224 Luggage Compartment, Loadspace and Storage
Cargo management system
The cargo management system is a variable
system for securing objects in the luggage
compartment.
It comprises two telescopic rails integrated in the
loadspace, a telescopic bar, four tie-down rings as
well as a strap reel and a reversible mat. The
reversible mat is provided with an anti-slip struc-
ture on the underside.
f For information on stowing loads and luggage:
Please observe the chapter “STOWING LOAD”
on Page 227.
Inserting and adjusting the telescopic bar
1. Insert the two end elements of the telescopic
bar in the openings A of the mounting rails.
2. Press the end elements down and push against
the load. When the bar is correctly positioned,
the load should no longer be able to move.
3. Release the end elements.
4. Check that the elements are locked in position
by pushing against them.
Inserting and adjusting the strap reel
The strap reel is stored in the supplied bag
together with the tie-down rings in the luggage
compartment or in the spare-wheel well.
1. Take the strap reel out of the bag.
2. Press the button B on the end element of the
strap reel and pull both elements out to the
width of the two mounting rails.
Luggage Compartment, Loadspace and Storage 225
3. Insert the two end elements of the strap reel in
the openings A of the mounting rails.
4. Press both end elements down and push
against the load.
5. Release the end elements.
6. Check that the elements are locked in position
by pushing against them.
7. Press button B and tension the strap so that
the load cannot move.
8. Release button B.
Inserting strap reel on one rail
1. Press button B on the end element and pull
both elements apart slightly.
2. Insert one end element of the strap reel in the
opening A of a mounting rail, press down and
slide into position.
3. Insert the second element in the same opening
A, press down and slide in the opposite direc-
tion.
4. Check that the elements are locked in position
by pushing against them.
5. Press button B and place the strap around the
item of luggage.
Tension the belt so that the item of luggage
cannot move.
6. Release button B.
226 Luggage Compartment, Loadspace and Storage
Inserting and adjusting tie-down rings
Tie-down straps or the luggage net can be
fastened to the tie-down rings.
Make sure that all rings are equally loaded when
securing a load.
The tie-down rings are not designed to restrain
loads in serious accidents.
1. Insert the tie-down ring in the opening A of the
mounting rail.
2. Press button C nach down and slide the
tie-down ring in the correspondig direction.
3. Release button C.
4. Check that the tie-down ring is locked in
position by pushing it.
5. Insert the remaining tie-down rings.
Note on operation
The opposing tie-down rings must always be
inserted in the opposite direction.
Luggage Compartment, Loadspace and Storage 227
Stowing load
Safety notes!
An unsecured or incorrectly positioned load
can slip out of place or endanger the vehicle
occupants during braking, direction changes
or in accidents.
Never transport objects which are not
secured (accident, braking, curves).
f Always transport loads in the loadspace, never
in the passenger compartment (e.g. on or in
front of the seats).
f Support the load against the seat backrests
whenever possible. Always lock the backrests
into place.
f Place the load behind unoccupied seats
whenever possible.
f Stow heavy objects as far forward as possible
on the floor, with lightweight objects behind
them.
f Never load the vehicle higher than the top
edge of the seat backrest.
f Always protect the passenger compartment
with a luggage safety net and a luggage
compartment cover.
Do not drive with objects on top of the luggage
compartment cover.
f If the rear seats are not occupied, the
backrests can be additionally secured with the
seat belts. Simply cross the outer seat belts
and insert each into the opposite buckle.
f Make sure that the load cannot damage the
heating filaments of the rear window and the
TV antenna of the side windows.
Luggage net
f Luggage must always be stowed completely
under the luggage net.
The luggage net is suitable only to prevent light
objects from slipping.
Tie-down belts
f Do not use elastic belts or straps to tie down
a load.
f Do not route belts and straps over sharp
edges.
f Observe the directions for use and information
for the tie-down equipment.
f Use only belts with a tear strength of at least
700 kg and a maximum width of 25 mm.
f Cross the belts over the load.
Driving
f The vehicle’s handling changes depending on
the vehicle load. Adapt your driving style to the
changed driving behaviour.
f Do not exceed the maximum gross weight and
the axle load.
This information is provided in the chapter
Technical Data in this Driver’s Manual:
Please observe the chapter “WEIGHTS” on
Page 369.
f Never drive with the rear window or rear lid
open.
Exhaust gases can enter the passenger
compartment.
f Adapt the tyre pressure to the load.
If you change the tyre pressure, you must also
update the setting for Tyre Pressure
Monitoring. For information on setting Tyre
Pressure Monitoring on the multi-purpose
display: Please observe the chapter “SETTING
VEHICLE LOADING AND ADJUSTING TYRE
PRESSURE” on Page 138.
f The information on tyre pressures for partially
and fully loaded vehicles is provided in the
chapter Technical Data in this Driver’s Manual:
Please observe the chapter “TYRE
PRESSURES, COLD” on Page 367.
228 Luggage Compartment, Loadspace and Storage
Luggage compartment cover
Luggage can be protected against prying eyes
with the luggage compartment cover.
f Always pull out the luggage compartment
cover when transporting objects in the
luggage compartment.
The luggage compartment cover is not
designed to carry objects.
f Do not hang bags or objects on the support
brackets A. The support brackets could break
off.
Warning!
Risk of injury. In the event of braking,
direction changes or in an accident, objects
can slide into the passenger compartment
and endanger the occupants.
f Do not place objects on top of the luggage
compartment cover.
Pulling out luggage compartment cover
f Pull out the cover by the handle and insert it
into the guides on the left and right side walls.
Luggage compartment cover, retracting
f Disengage the luggage compartment cover
from the guides on the side walls and carefully
guide it back into the retractor roller.
Removing luggage compartment cover
f Pull the release B back.
f Lift the cover at the right and remove.
Luggage Compartment, Loadspace and Storage 229
Installing luggage compartment cover
f Insert the cover into the receiving holder on the
left side.
f Press the cover down into the holder on the
right side until it can be heard and felt to
engage.
Release B must point forwards.
Luggage safety net
The luggage safety net can hold back only light-
weight items in the event of braking, changes in
direction or in an accident.
f For information on stowing loads and luggage:
Please observe the chapter “STOWING LOAD”
on Page 227.
Warning!
Risk of injury. Unsecured loads can slip and
endanger the occupants in the event of
braking, changes in direction or in an
accident.
f Always secure the passenger compartment
with the luggage safety net.
f Always fasten the load at the tie-down rings.
f Never load the vehicle higher than the top
edge of the seat backrest.
Maintenance note
f If the luggage safety net was heavily stressed
or damaged during braking or in an accident
etc., have the safety net and its retaining
bracket checked by a qualified specialist
workshop.
We recommend that you use a Porsche
partner for this work since these are staffed
with trained personnel and have the necessary
parts and tools.
Permitted uses
A – Variant 1
230 Luggage Compartment, Loadspace and Storage
B – Variant 2
In the case of variant, 2, it is necessary to first fold
forward the rear seats and open the covers of the
luggage safety net fixing points.
For information on folding the rear seats forward:
Please observe the chapter “FOLDING REAR
SEATS FORWARD” on Page 220.
Securing passenger compartment with
luggage safety net
Pulling out luggage safety net
f Pull the luggage safety net out and engage the
fastening hooks into the fixing rings on the
ceiling.
The luggage safety net fastening hooks can be
pulled out at the sides.
f Make sure that the luggage safety net
fastening hooks are properly engaged in the
fixing rings.
Removing luggage safety net assembly
from the rear seat backrest
1. Open both rear doors.
2. Fold down the left rear seat backrest first,
followed by the right rear seat backrest. The
seat cushions need not be folded over for this
purpose.
f For information on folding the rear seats
forward:
Please observe the chapter “FOLDING REAR
SEATS FORWARD” on Page 220.
3. Push the luggage safety net assembly in the
direction of arrow 1.
4. Lift the luggage safety net assembly up and off
(direction of arrow 2).
Luggage Compartment, Loadspace and Storage 231
Ski bag
Long objects such as skis can be transported
cleanly and without damaging the passenger
compartment.
Loading ski bag
1. Press release button A on the lid of the pass-
through facility.
Fold down the lid.
2. Fold down the armrest of the rear seat
backrest.
3. Pull protective cover B off the Velcro strip at
the top and fold down.
4. Press release button C on the lid of the pass-
through facility and fold down the lid.
5. Pull out and unfold the ski bag.
6. Insert objects into the ski bag from the
luggage compartment.
232 Luggage Compartment, Loadspace and Storage
Securing load
f Secure the stowed objects with tightening
belt D.
f Insert belt tongue into the buckle.
Stowing the ski bag
1. Empty ski bag.
2. Pull ski bag into the passenger compartment.
3. Close lid in the luggage compartment.
4. Carefully fold the ski bag and close the lid.
5. Insert protective cover and fasten it with the
Velcro strip.
Note on operation
f Fold up the ski bag only when it is dry.
Luggage Compartment, Loadspace and Storage 233
Roof Transport System
f Please follow the separate instructions for
fitting the Roof Transport System.
f Only use Roof Transport Systems from the
Porsche Tequipment product range or Roof
Transport Systems which have been tested
and approved for your car by Porsche. Fitting
normal commercially available luggage racks
is not possible.
The Porsche Roof Transport System allows you
to carry various sports and hobby equipment.
Your Porsche partner will be pleased to tell you
about the various different uses of the Roof Trans-
port System.
Safety notes!
f Completely remove the Roof Transport System
before using an automatic car wash – risk of
damage to the vehicle!
f Do not exceed the maximum permitted roof
load, the maximum permitted gross weight
and the maximum permitted axle loads.
This information is provided in the chapter
Technical Data in this Driver’s Manual:
Please observe the chapter “WEIGHTS” on
Page 369.
f Distribute load evenly, with heavy items as low
as possible. Items of luggage must not project
beyond the side of the load area.
f Fix and secure every item to the basic carrier
with a rope or lashing strap (do not use elastic
rubber tensioners).
f Before every journey, and at regular intervals
during long trips, check that Roof Transport
System and load are secure. Re-tighten if
necessary and secure additionally by locking.
When the Roof Transport System is loaded, the
maximum speed depends on the nature, size and
weight of the load being carried.
f But never drive faster than 140 km/h
(90 mph).
f With the basic carrier fitted and no load, do
not exceed a maximum speed of 180 km/h
(110 mph).
f Driving, braking and steering behaviour
change due to the higher centre of gravity and
the greater wind-resistant area. You should
adapt your driving style appropriately.
f Since fuel consumption and noise are
increased with the Roof Transport System
fitted, it should not remain on the vehicle if not
in use.
234 Luggage Compartment, Loadspace and Storage
Storage
Warning!
Danger of injury during braking, rapid
direction changes or in an accident.
f Do not carry items of luggage or objects in the
passenger compartment unsecured.
f Do not transport any heavy objects in open
oddments trays.
f Always keep the covers of the oddments trays
closed while driving.
f Always protect the passenger compartment
with a safety net and a luggage compartment
cover.
Note on operation
An unsecured or incorrectly positioned load can
slip out of place or endanger the vehicle
occupants during braking, direction changes or in
accidents.
f For information on stowing loads and luggage:
Please observe the chapter “STOWING LOAD”
on Page 227.
Storage options
– In the glasses case in the roof console,
– In the glove compartment, pen holder,
– In the front and rear armrests,
– In the drawer underneath the passenger’s
seat,
– In the storage compartments at the sides of
the luggage compartment,
– In the door trim panels,
– In the centre console, front and rear,
– On the back of the front seats,
– Coat hooks on the rear grab handles,
– Under the load compartment floor,
– In the front and rear cupholders.
Glasses case in the roof console
Sunglasses, for example, can be stored in this
storage compartment.
Opening
f Press button (arrow).
Closing
f Close the lid until it clicks audibly into place.
Luggage Compartment, Loadspace and Storage 235
Glove compartment
A drawer, designed to hold the vehicle folder, is
located in the glove compartment.
Opening
f Press button A and open cover.
Locking
f Always lock button A with the vehicle key to
secure the contents from unauthorised
access.
B - Control for glove compartment cooling
C - Holder for pens
f Turn thumb wheel B counter-clockwise.
f Turn thumb wheel B clockwise.
Cooling the glove compartment
Switching off cooling
236 Luggage Compartment, Loadspace and Storage
Oddments trays in the armrest between
the front seats
Two oddments trays are located in the armrest.
Opening the top tray
f Press button A and lift the cover.
Opening the lower tray
f Press button B and lift top tray with the cover
closed.
Oddments tray in the rear armrest
An oddments tray is located in the armrest.
Opening the oddments tray in the armrest
1. Fold down the armrest completely.
2. Press button C and lift the cover.
Luggage Compartment, Loadspace and Storage 237
Side storage compartments in the
luggage compartment
Depending on how the vehicle is equipped, there
is an additional storage option in the left-hand
storage compartment. The shelf can be removed
to increase the size of the compartment.
Opening the storage compartment
f Pull off the cover at the handle recess.
Closing the storage compartment
f First, insert the cover at the bottom and then
close it until it audibly clicks into place.
Caution!
Risk of damage.
f Because of heat, the right-hand storage
compartment cannot be used as such in
vehicles that have air suspension with level
control and height adjustment.
Drawer under the right front seat
There is room for the fire extinguisher in the
drawer underneath the right front seat.
On vehicles with DVD navigation, the DVD player is
under the right front seat.
f For information on the installation location of
the DVD player:
Please observe the chapter “DVD PLAYER
UNDER THE RIGHT FRONT SEAT” on
Page 239.
Opening
f Lift the release handle and pull out the drawer.
Closing
f Close the drawer until it clicks audibly into
place.
238 Luggage Compartment, Loadspace and Storage
Cupholder
You can place drinks cans and cups in the
cupholder.
f Keep the cupholder closed while driving.
Warning!
Risk of scalding or damage due to spilling
drinks.
f Only use containers which fit.
f Never put overfull containers in the cupholder.
f Never use hot drinks.
Opening front cupholder
f Open shutter A (arrow).
Removing cupholder insert
The cupholder insert can be removed for cleaning.
Removing the insert makes an additional
oddments tray available.
f Open shutter A.
f Press together the cupholder insert at the two
engagement recesses B.
f Remove the cupholder insert.
Luggage Compartment, Loadspace and Storage 239
Opening rear cupholder
f Press on the cover of the cupholder (arrow).
Closing rear cupholder
f Close and engage the cupholder.
DVD player under the right front
seat
On vehicles with DVD navigation, the DVD player is
under the right front seat behind a cover.
Opening the cover
f Pull cover upwards by means of handle
(direction of arrow 1).
f Pull out cover towards the front
(direction of arrow 2).
Closing the cover
f Insert the four guide lugs of the cover into their
openings (arrow).
f Press the cover into place.
f Push down cover until it can be felt clicking into
place.
240 Luggage Compartment, Loadspace and Storage
Ashtray, front
Opening
f Press ashtray lid briefly.
Emptying
f Move unlocking button A to the right and pull
out the ashtray insert in upward direction.
f After emptying, replace the ashtray insert and
push it down until it clicks audibly into place.
Ashtray, rear
Depending on the vehicle equipment, an ashtray
may be installed in the rear door panels.
Opening
f Press ashtray lid briefly.
Emptying
f Open ashtray lid and press carefully towards
the door panel.
The insert is raised slightly.
f Remove insert and empty.
Luggage Compartment, Loadspace and Storage 241
Cigarette lighter
Warning!
Risk of fire and burning.
f Do not leave children in the vehicle unattended.
f Only hold the heated lighter by the knob.
The cigarette lighter is ready for use regardless of
the ignition lock position.
Using the front cigarette lighter
f Press ashtray lid briefly. Ashtray opens
independently.
f Press lighter into the receptacle (arrow). When
the element is red hot the lighter jumps back
to its initial position.
Using the rear cigarette lighter
f Briefly press the lid in the centre console. The
lid opens independently.
f Press lighter into the receptacle (arrow). When
the element is red hot the lighter jumps back
to its initial position.

Related Topics

Folding rear seats forward and returning to upright position Loadspace Cargo management system Stowing load Luggage compartment cover Luggage safety net Ski bag Roof Transport System Storage Cupholder DVD player under the right front seat Ashtray, front Cigarette lighter

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot