Windows and Sliding Roofs 83
Sliding/Lifting Roof
The electric sliding/lifting roof is made of tinted
single-sheet safety glass. It has a sliding roof
cover that can be continuously adjusted manually
to protect against the direct entry of sunlight.
The sliding/lifting roof can be slid open or lifted at
the rear.
If there are persons or animals in the movement
range of the sliding/lifting roof, parts of the body
could become trapped or crushed.
f Take care to ensure that nobody can be injured
when the sliding/lifting roof is operated.
f Always remove ignition key when leaving the
vehicle or switch ignition off on vehicles with
Porsche Entry & Drive. Always take the ignition
key with you when leaving the vehicle.
Uninformed persons (e.g. children) could injure
themselves when operating the sliding/lifting
roof.
f In case of danger, operate the sliding roof
button in the opposite direction.
Operational readiness of the sliding/
lifting roof
The sliding/lifting roof is ready for operation:
– With ignition switched on.
– After the ignition is switched off and before the
driver’s or passenger’s door is first opened,
but for a maximum of 10 minutes.
Operating sliding/lifting roof
The sliding/lifting roof is operated using the button
in the overhead operating console.
The sliding roof button has a two-stage function
for all directions of motion. These two detent
positions can be felt clearly when you actuate the
switch.
– First setting – manual operation
If the button is moved to the first setting in one
direction, the sliding/lifting roof is adjusted
manually in the relevant direction.
Adjustment stops when the button is released.
– Second setting – one-touch operation
If the button is moved completely to the
second setting, the sliding/lifting roof is
opened or closed automatically.
Actuate the switch again in any direction to
stop the sliding/lifting roof in the desired
position.
Information
– The sliding/lifting roof does not function at
extremely high vehicle speeds or at extremely
low temperatures.
– The sliding/lifting roof has a force limiter.
If obstructed during the closing process,
the sliding/lifting roof opens again
immediately.
Noise-optimized position when opening
The sliding/lifting roof slides open both in manual
mode and one-touch operation mode until it
reaches the best end position from the point of
view of noise.
Opening sliding/lifting roof fully
Actuate the button again in opening
direction to open the sliding/lifting roof fully.
When fully opened, the sliding/lifting roof may
generate wind noise depending on the speed of
the vehicle.
Sliding Roof Operation
English 
