2019-2024 Porsche Taycan 2 Door Brakes User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Brakes for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Brakes
61
Brakes
General safety instructions
WARNING
Blocked pedals
Unsuitable or improperly secured floor mats can re-
strict pedal travel or interfere with pedal operation.
The accelerator pedal may be inadvertently actuated
or the brake pedal blocked. This can result in an un-
expected increase in speed or make braking more
difficult.
e Only use floor mats that are suitable for the
vehicle.
e Secure floor mats properly and do not place them
loosely on the floor.
e Do not lay several floor mats on top of each
other.
e Ensure that the floor mats are securely fitted
again after they have been removed, such as for
cleaning.
WARNING
No brake force boosting
The brake booster is ready for operation only while
the engine is running. For this reason, much greater
force has to be applied to the pedal when braking
while the engine is switched off or if there is a defect
in the brake booster.
e Vehicles with defective brakes must not be
towed.
WARNING
Water film on brake
discs
In heavy rain, when driving through water or after
leaving a car wash, the braking action may be
delayed and increased foot pressure may be
required.
e Check the brakes after washing the vehicle.
e For this reason, keep further back from the ve-
hicle in front and “dry” the brakes by applying
them at intervals. Make sure that the traffic be-
hind you is not affected.
WARNING
Reduced braking action
After a long drive over salted or gritted roads, a
coating may form on the brake discs and pads that
significantly reduces friction and therefore the brak-
ing effect as well.
The brake discs will unavoidably start to corrode if
your vehicle is parked for an extended period. The
brakes will tend to "judder" as a result.
e If braking comfort is noticeably impaired:
Go to a qualified specialist workshop. Porsche rec-
ommends a Porsche partner as they have trained
workshop personnel and the necessary parts and
tools.
For information on brake fluid and checking the
brake fluid level:
> Please refer to chapter "Brake Fluid" on page 60.
Operating principle
Bedding in and cleaning the brakes
The vehicle has a braking recuperation system that
feeds some of the braking energy back into the high-
voltage battery. In order to bed in the wheel brake,
the recuperation system is deactivated briefly on
new vehicles or after changing the brake pads and
this reduces the range. To assist in cleaning the
brakes, the recuperation system is deactivated for a
short time after standstill times of more than 6
hours. The recuperation system is activated again
automatically afterwards.
Brake pads and brake discs
Wear on different components of the brake system
(e.g. brake pads and brake discs) depends on the
driving style and the conditions of use and cannot be
expressed in actual miles on the road.
Certain speeds, braking forces and ambient condi-
tions (e.g. temperature and humidity) can cause the
brakes to squeal.
Porsche Ceramic Composite Brake (PCCB)
The values communicated by Porsche are based on
normal operation adapted to the traffic situation.
Wear increases considerably when the vehicle is
driven on race tracks or as a result of aggressive
driving.
e Before driving your vehicle in this way (e.g. on
race circuits), ask your Porsche partner about
currently applicable guidelines.
Porsche Surface Coated Brake (PSCB)
The brake disc friction surface of PSCB brakes has a
specific look and cannot be compared with a stand-
ard brake disc. When a vehicle is driven normally
according to the prevailing traffic situation, a shiny
chrome-like friction surface covered with fine cracks
appears. Wear, cracks and darkening of the shiny
silver friction surface increase when the vehicle is
driven in this way. These visual changes have no
relevant effect on brake function and are partially
diminished after driving several thousand kilometres.
e Before driving your vehicle in this way (e.g. on
race circuits), ask your Porsche partner about
currently applicable guidelines.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Brakes
62
Activating the emergency braking
function
WARNING
Severe deceleration
Emergency braking takes place with very high brak-
ing power. The following traffic may be endangered
and control over the vehicle may be lost.
e Only use the emergency braking function in an
emergency situation.
e Do not use the emergency braking function to
stop the vehicle when driving normally.
If the vehicle cannot be stopped by conventional
braking, you can decelerate sharply and stop the ve-
hicle using the electric parking brake.
e Press and hold the P button next to the selector
lever.
The brake warning light
starts to flash.
To deactivate the emergency braking function:
e Release the P button.
Responding to warning messages
Brake pad wear limit
If the wear limit of the brake pads is reached, a
warning symbol is displayed on the instrument
cluster.
> Please refer to chapter "Warning and information
messages" on page 271.
e Have brake pads replaced immediately.
Visit a qualified specialist workshop. Porsche
recommends a Porsche partner as they have
trained workshop personnel and the necessary
parts and tools.

Related Topics

Popular Owner Manuals