
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Car Care
63
Car Care
General care instructions
WARNING
Water film on brake
discs
In heavy rain, when driving through water or after
leaving a car wash, the braking action may be de-
layed and increased foot pressure may be required.
e Check the brakes after washing the vehicle.
e For this reason, keep further back from the ve-
hicle in front and “dry” the brakes by applying
them at intervals. Make sure that the traffic be-
hind you is not affected.
Regular and expert care helps to maintain the value
of your Porsche and can be a precondition for the
upholding of claims under the vehicle warranty.
Porsche recommends car care products from Por-
sche Tequipment.
e Follow the instructions for use on the packaging
of care products.
e Keep care products out of reach of children.
e Dispose of care products in accordance with
regulations.
To ensure that the vehicle’s condition is expertly
checked and that the guarantee remains valid for the
full period: Contact your Porsche partner. The dealer
will prepare a condition report and will certify the
level of care of the vehicle.
NOTICE
High-pressure cleaners and steam cleaners can
damage the following components:
– Tyres
– Logos, emblems, decorative foils
– Painted surfaces
– Charge port
– Electrical components (e.g. high-voltage battery)
and plug connections
– ParkAssist sensors
– (Radar) sensors of the Adaptive Cruise Control
(ACC) and other assistance systems
– Cameras
– Windscreen wipers
No vehicle is absolutely leak-proof. Water may leak
into the passenger compartment during cleaning.
e Always read the operating instructions provided
by the equipment manufacturer.
e Always observe a minimum distance of 50 cm
when cleaning. Being closer may trigger the tail-
gate release button and accidentally open the
tailgate.
e Do not point the cleaning jet directly at any of the
above-mentioned components.
e Never point the cleaning jet directly in openings.
Cover the openings before washing.
e Do not use high-pressure cleaners or steam
cleaners to clean decorative films.
e Never use high-pressure cleaners or steam
cleaners with a round jet nozzle. A high-pressure
cleaner or steam cleaner fitted with a round jet
nozzle will damage your vehicle. The tyres are
particularly susceptible to damage.
High-voltage battery care
General care instructions
The high-voltage battery is subjected to a physical
and chemical ageing and wear process. This reduces
the capacity of the high-voltage battery over its life
cycle depending on the pattern of use and the envi-
ronmental conditions, which reduces the maximum
possible range and increases charging times as the
battery ages, among other things.
The following measures can be taken to reduce bat-
tery ageing and wear:
e If possible, avoid exposing the vehicle to tem-
peratures of over 30 °C for long periods, e.g. as a
result of parking it in direct sunlight.
e Ensure that the temperature of the vehicle is
between approx. -20 °C and +30 °C during the
charging process.
e If possible, begin charging the high-voltage bat-
tery via the Charging Planner and use the Timer
or Profile function to charge the battery with al-
ternating current (AC).
e Use the Timer or Profile function to program a
maximum high-voltage battery charge of 85%
for daily use of the vehicle without any long-dis-
tance driving.
e At ambient temperatures above 30 °C, connect
the vehicle to the mains and charge the high-
voltage battery with alternating current (AC).
Use the Timer or Profile function.
e In ambient temperatures above 35 °C, avoid us-
ing "Range" drive mode immediately after
charging with 150 kW direct current (DC) in or-
der to maximise cooling of the high-voltage
battery.
Notes on leaving the vehicle unused for long
periods
For idle periods of two weeks or longer:
e Do not park the vehicle with a discharged high-
voltage battery; connect it permanently to the
mains supply instead.
e Make sure that the high-voltage battery is
charged to between 20% and 50% throughout