
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Charging high-voltage battery
84
Programming and activating the charging
profile
bb Departure time in the future.
The Profile function ensures that the high-voltage
battery is charged to a programmed minimum
charge level at a specified departure time, such as to
use specific energy rates.
Programming and activating the general charging
profile
The high-voltage battery is charged automatically to
the programmed charge level during the specified
charging times when the vehicle is charged using
alternating current (AC) and provided that no timer
or location-dependent charging profile is active.
1.
e Charging e Profile
2. Editing the general charging profile
.
3. Programming the minimum charge level.
4. Activating optimised charging.
– or –
Setting and activating your preferred charging
times and programming preferred charging
times.
5. Activating the general charging profile.
Programming and activating the location-depend-
ent charging profile
1.
e Charging e Profile
2. Select Add new profile.
– or –
Edit existing profile
.
3. Programme thename and select the location.
4. Programming the minimum charge level.
5. Activate optimised charging.
– or –
Setting and activating your preferred charging
times and programming preferred charging
times.
6. Activate thecharging profile.
Deactivate the profile
1.
e Charging e Profile
2. Deactivate theprofile.
Starting charging using the profile
bb Profile programmed and activated.
bb Vehicle plug inserted.
The profile function defines the charging process,
which then starts automatically. The high-voltage
battery will be charged to the specified charge level
within the programmed charging time.
The high-voltage battery may not be fully charged
depending on the minimum charge level
programmed.
Stopping charging using the profile
bb Vehicle plug inserted.
bb Profile function activated.
e Press the release button.
High-voltage battery charging stops.
e If charging is ongoing, wait until the ring has
disappeared from the release button.
Charging times
Charging powers and times depend on various fac-
tors, which may increase charging times consider-
ably compared to the values indicated:
– Customer-specific installation, e.g. socket used.
– Power output of the country-specific energy
infrastructure.
– Settings for charging current limiting on the
control unit.
– Fluctuations in the mains voltage.
– Ambient temperature of the vehicle and the
charging equipment.
– Temperature of the high-voltage battery and
control unit.
– Charge level of the high-voltage battery.
– Age of the high-voltage battery and number of
charges completed.
– Passenger compartment temperature precool-
ing/heating activated.
– Current-carrying capacity of the vehicle plug.
The amount of energy taken from the mains power
supply is greater than the amount of energy stored
during charging of the high-voltage battery. The
reasons for this include physical charging losses and
the use of energy to control the temperature of the
high-voltage battery.
For physical and chemical reasons, the charging
speed decreases as the charge level approaches
100%.
The predominant use of fast charging columns (DC)
causes charging times to increase in the long term.
e A maximum charging power of 50 kW should be
selected for regular charging with direct current
(DC).
e Charging with alternating current (AC) is recom-
mended at home. Using an industrial electrical
outlet (AC) will allow you to achieve higher