
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Device Manager
102
Device Manager
Opening the Device Manager
The Device Manager provides an overview of the
available devices and of their connection status.
e
e Devices
– or –
Touch the
or in the status area (de-
pending on the connection status).
Displaying connection status
Colours and meanings of the symbols
– Blue symbol: Connection is active.
– White symbol: Connection is possible, not yet
active.
– No symbol: Connection is not possible.
Available functions
–
Telephone: Mobile phones
®
connected via
refer to chapter "Phone" on
page 182.
–
Music: External media sources connected via
Bluetooth
®
.Please refer to chapter "Media" on
page 157.
–
Data: Data connection established via the
access refer to chapter "Porsche
Connect" on page 196.
–
WiFi: WiFi devices connected via the PCM
WiFi hotspot. Please refer to chapter "Porsche
Connect" on page 196.
–
Apple CarPlay: iPhone connected via the USB
port or wirelessly with access to Apple CarPlay.
Please refer to chapter "Apple CarPlay" on
page 55.
e The Connection Assistant will help you to con-
nect devices or media sources:
e Devices
e Connection assistant
Pairing a new device via
Bluetooth
®
1. Touch
e Devices e Connection assistant
e Connect new telephone/Connect new music
player.
2. Select the device from the list.
A 6-digit Bluetooth
®
code is generated and dis-
played on the central display and device.
3. Compare the Bluetooth
®
code on the central
display and device.
4. If the Bluetooth
®
code in the PCM and on the
device match, confirm.
If the mobile phone has been successfully con-
nected, it appears in the device overview.
For information on operating Porsche
Communication Management (PCM):
> Please refer to chapter "Porsche Communication
Management (PCM)" on page 190.
Device Manager settings
e Touch
e Devices e .
The following settings are available (country-
dependent):
– Telephone settings: Please refer to
chapter "Phone" on page 182.
– Bluetooth settings:
– Switching Bluetooth on or off.
– Modifying the Bluetooth name of the PCM.
– WiFi settings:
– Switching WiFi on or off.
– Allowing internet access: Activate the PCM
WiFi hotspot and allow a data connection for
WiFi devices.
– Allowing internet access: Display and set up
the PCM WiFi access data. This data is re-
quired to be able to connect a device (e.g.
mobile phone) to the PCM via WiFi and to use
a WiFi hotspot.
– Data connection settings:
– Display online data traffic
– Reset online data counter
Interfaces
USB interfaces (type C) are located in the front
armrest and in the rear. The USB interfaces in the
rear can only be used for charging purposes.
Fig. 74: USB charge ports in the rear