2019-2024 Porsche Taycan 2 Door Emergency Stop Function User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Emergency Stop Function for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Emergency Stop Function
112
Emergency Stop Function
General safety instructions
WARNING
Lack of attention and
failure to detect objects
The system can only assist the driver within the
limits of the system, but it cannot replace the driver.
The assistance offered by the system should not in-
duce you to risk your safety.
Nor can the system prevent an accident under all
circumstances. The driver is always responsible for
an appropriate response.
The system cannot detect the following situations:
– Persons, cyclists and animals
– Objects on the road
– Oncoming vehicles and cross traffic
e Drive with extreme care.
e Always pay attention to the traffic situation and
the area around the vehicle.
System limitations
The function may be limited, unresponsive or deac-
tivate automatically in the following situations:
– If the driver actuates the accelerator pedal, brake
or steering.
– If driving systems such as Lane Keep Assist, Ac-
tive Lane Keeping, ACC or PID are limited.
– If the radar sensors or the windscreen in the area
of the camera are damaged or soiled.
Responding to warning messages
Always heed any warning and information messages
displayed in the vehicle.
> Please refer to chapter "Warning and information
messages" on page 271.
Operating principle
The system monitors the steering, accelerator and
brake pedal activity of the driver and provides sup-
port in the speed range from 0 km/h (0 mph) to ap-
prox. 210 km/h – 250 km/h (130 mph – 156 mph)
1
.
If the emergency stop function is active, it will ini-
tiate visual, acoustic or haptic warnings in stages
and will brake the vehicle to a standstill.
The following conditions must be met for the
switched-on emergency stop function to be active:
In the speed range from 0 km/h (0 mph) to
65 km/h (40 mph):
– Active Lane Guidance is active and the driver
does not react to the takeover prompts of Active
Lane Guidance.
In the speed range from 65 km/h (40 mph) to
210 km/h (130 mph):
– Active Lane Guidance is active and the driver
does not react to the takeover prompts of Active
Lane Guidance.
– Active Lane Guidance is switched off, Lane Keep
Assist is active and the driver does not react to
the takeover prompts from Lane Keep Assist.
– Active Lane Guidance is switched off, Lane Keep
Assist is switched off and the emergency stop
function does not detect any steering, braking or
accelerator pedal activity.
In the speed range from 210 km/h (130 mph) to
250 km/h (156 mph):
– Lane Keep Assist is active and the driver does not
react to the takeover prompts from Lane Keep
Assist.
– Lane Keep Assist is switched off and the emer-
gency stop function does not detect any steer-
ing, braking or accelerator pedal activity.
If Active Lane Guidance is deactivated in the speed
range below 65 km/h (40 mph), the emergency stop
function is not available.
These warnings prompt the driver to take control of
the vehicle:
– Driver instructions in instrument cluster
– Warning signals
– PCM muting
– Jerking belt
– Warning jerks and gentle braking
If the driver still fails to act, the emergency stop
function executes an emergency stop:
– The hazard warning lights are activated.
– The seat belt is tensioned.
– The windows are closed.
– The seat side bolsters are inflated (depending on
the equipment).
– The vehicle is braked to a stop in its own lane.
Additional warning jerks are executed as this
happens.
After the vehicle has come to a standstill, the park-
ing lock and parking brake are activated, the doors
are unlocked, the interior lighting is activated and an
emergency call
2
and equipment.
To drive on again, select drive position D or R.
1. The specified speed range depends upon various factors, e.g. drive power, tyre type, loading, road surface, uphill and downhill gradients etc.
2. is triggered depending on the country
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Emergency Stop Function
113
Overriding the emergency stop
function
The emergency stop function can be overridden
while driving. This temporarily deactivates the sys-
tem. This also happens when the does this driver
without knowing it. Override the emergency stop
function by:
e Move the steering wheel
– or –
e Pressing the brake pedal
– or –
e Heavily pressing the accelerator pedal.
Activating and deactivating the
emergency stop function
e
e Assistance e Basic assistance e
Emergency Stop Function
Information
The emergency stop function is activated automati-
cally after operational readiness has been
established.

Popular Owner Manuals