2019-2024 Porsche Taycan 2 Door Luggage compartment User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Luggage compartment for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Luggage compartment
153
Luggage compartment
Stowing loads
WARNING
Changed vehicle han-
dling when vehicle is
loaded
Vehicle handling changes depending on the vehicle
load.
e Adapt your driving style to the changed vehicle
handling.
e Do not exceed the maximum gross weight and
axle load.
WARNING
Unsecured, incorrectly
secured or incorrectly
positioned load
As a result of braking, changes of direction or in an
accident, unsecured or incorrectly positioned loads
can slide out of place and endanger vehicle
occupants.
e Never transport unsecured objects (accident,
braking, cornering).
e Always carry loads in the luggage compartment,
never in the passenger compartment (e.g. on or
in front of the seats).
e Support the load at the seat backrests wherever
possible. Always engage the backrests.
e Only transport heavy objects when the backrests
are upright and engaged.
e Place the load behind unoccupied seats when-
ever possible.
e Store heavy objects as far as possible from the
floor with light objects behind them.
e Do not transport any objects on the rear shelf.
e On unoccupied rear seats, the backrests can be
additionally secured using the seat belts. To do
this, cross the outer seat belts and fasten them
to the respective opposite belt buckles.
e Do not transport any heavy objects in open stor-
age compartments.
e Always keep lockable storage compartment
covers closed when driving.
WARNING
Incorrect tyre pressure
An incorrect tyre pressure can impair driving safety.
e Adapt the tyre pressure to the load.
e After you change the tyre pressure, you must al-
so update the setting for Tyre Pressure
Monitoring.
The maximum permissible load on the luggage
compartment floor is 200 kg. The weight must be
evenly distributed over the entire luggage
compartment.
Securing loads with tie-down belts
e Do not use elastic belts or straps to tie down a
load.
e Do not route belts and straps over sharp edges.
e Cross the belts over the load.
e Only tighten the belts manually. Do not use ad-
ditional tensioning aids (ratchet).
e Observe the instructions and information for the
tie-down belts.
Opening and closing the bonnet
and tailgate
> Please refer to chapter "Bonnet" on page 57.
> Please refer to chapter "Rear lid" on page 211.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Luggage compartment
154
Removing and stowing the tyre
sealing compound, tool kit and
equipment for minor repairs
Fig. 113: Plastic boxes in the front luggage compartment
A Warning triangle (country-dependent)
B Plastic box for tyre sealant, towing lug and first-aid kit
(country-dependent)
C Plastic box for tool kit and tyre filling compressor
Removing the warning triangle (country-
dependent)
The warning triangle A is located on the back of the
luggage compartment.
Removing the tyre sealant, towing lug and
first-aid kit (country-dependent)
e Remove the cover from the plastic box B and
take out the desired equipment.
Removing the tool kit and tyre filling
compressor
e Remove the cover from plastic box C and take
out the desired equipment.
Fig. 114: Plastic box for tyre sealant, towing lug and first-aid
kit (country-dependent)
A Tyre sealant
B Towing lug
C First-aid kit (country-dependent)
Fig. 115: Plastic box for tool kit and tyre filling compressor
A Tool box
B Emergency release tool for the charge port door
C Open-ended spanner
D Tyre filling compressor
E Screwdriver
F Wrench socket for security wheel bolts
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Luggage compartment
155
Installing and removing the plastic
cover in the front luggage
compartment
Removing the plastic cover in the front lug-
gage compartment
Fig. 116: Detaching and lifting the plastic cover
1. Lift the plastic cover until the latch audibly
disengages.
2. Pull the plastic cover forwards slightly and lift at
the front.
3. Remove the plastic cover.
Installing the plastic cover in the front lug-
gage compartment
Fig. 117: Closing the plastic cover
1. Insert the plastic cover with the guides at the
rear edge and lay it on the holders. Lower the
plastic cover in the front.
2. Ensure that the centring pins on the underside of
the cover engage in the respective guides.
Press the cover downwards at the handle re-
cesses until the latch audibly engages.
Opening and closing the boot floor
Opening the luggage compartment floor
Fig. 118: Opening the boot floor
e Lift the boot floor by the tab.
Closing the luggage compartment floor
e Lower the boot floor using the tabs.
Using the ski bag
Skis or snowboards can be transported safely with-
out damaging the passenger compartment.
NOTICE
Risk of damage to the ski bag from sharp edges on
the load (e.g. snowboard).
e Protect sharp edges on the load.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Luggage compartment
156
Storing a snowboard or skis in the ski bag
Fig. 119: Using the ski bag
The ski bag is stored in the gear bag for it in the
luggage compartment.
1. Fit edge protectors to the snowboard or skis.
2. Place the snowboard or skis into the ski bag and
close the ski bag. The skis must be positioned
with the tips at the front in the ski bag. The ski
bag zip must be pointing towards the rear of the
vehicle.
3. Fasten the skis using the tightening strap. The
ski bindings must be behind this band.
4. Fold down the pass-through cover between the
rear seats.
5. Hook the spring hooks of the tension straps into
the tie-down rings.
6. Tighten the tension straps.
Using tie-down rings
Fig. 120: Using tie-down rings
Tie-down straps can be fastened to the tie-down
rings to secure the load in the boot to prevent it from
slipping.
e Make sure that all rings are equally loaded when
securing a load.
Information
The tie-down rings are not designed to restrain a
heavy load in an accident.

Related Topics

Popular Owner Manuals