
Same Driving Pleasure, More Safety
15
Driving on race circuits
Compared with driving on roads, driving on race cir-
cuits involves disproportionately high vehicle loads,
which pure race vehicles are able to withstand
thanks to short maintenance and component recon-
ditioning intervals. This includes carrying out checks
and replacing individual components where neces-
sary after each race circuit use and even overhauling
entire assemblies after specified periods.
e Always make enquiries about the current stipu-
lations before driving on race circuits: Contact
your Porsche partner.
Following race circuit use, “cooling laps” must be
driven in order to reduce the temperature of vehicle
parts subjected to particularly high thermal loads in
a controlled fashion. Stopping the vehicle right away
would cause the component temperature to rise
further due to stationary heat build-up. This can lead
to irreparable damage to individual components.
Brake system
Brake fluid absorbs moisture from the air over time.
This absorption of water lowers the boiling point and
can considerably impair braking efficiency at high
temperatures.
Brake pads and brake discs are subjected to very
high stress when driving on a race circuit.
e If the brake fluid is more than 12 months old:
Replace brake fluid before driving on a race
circuit.
e Have the brake pads and brake discs checked for
wear before and after driving on race circuits.
tyre
Tyres are also subjected to very high loads when
driving on a race circuit.
e Have tyres checked for wear before and after
driving on race circuits.
e Do not fit racing tyres. Racing tyres are not ap-
proved by Porsche.
Before driving abroad
Not all Porsche models are sold in all countries. As a
result, spare parts may not be available, or the Por-
sche Partner may not be able to carry out all repair
work.
Find out the following information before driving
abroad:
– Can the vehicle be repaired if it breaks down?
– Does the vehicle require technical adjustments?
– Do the headlights need to be changed for left-
right-hand traffic?
> Please refer to chapter "Vehicle settings" on
page 257.
Data processing in the vehicle
Electronic control units are installed in your vehicle.
Some of these are required for the operational safety
of your vehicle, while others provide assistance while
driving (driver assistance systems). Moreover, your
vehicle offers comfort and entertainment functions
which are also made possible through electronic
control units.
Your vehicle has a unique chassis number. This ve-
hicle identification number (VIN) can be traced back
to the present owner and to previous owners of the
vehicle through the local authorities within the
European Union. There are also other ways of tracing
data collected from the vehicle back to the owner or
driver, e.g. using the vehicle registration number.
Storing technical data in the vehicle
Electronic control units have data memories that can
temporarily or permanently store technical informa-
tion about vehicle status, component stress, servic-
ing requirements, events or faults. Generally
speaking, this technical information documents the
status of a component, module, system or environ-
ment such as:
– Operating states of system components (e.g. fill
levels)
– Status messages about the vehicle and its indi-
vidual components (e.g. wheel revolutions,
speed, deceleration, lateral acceleration)