2019-2024 Porsche Taycan 2 Door Seat Belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seat Belts for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Seat Belts
220
Seat Belts
Using seat belts correctly
DANGER
Unfastened or incor-
rectly used seat belts
Seat belts do not offer any protection in an accident
if they are not worn. Incorrectly worn seat belts in-
crease the risk of injury in an accident.
e For their own safety, all occupants of the vehicle
must wear a seat belt on all trips.
e Share all the information in this section with your
passengers.
e Never use one seat belt for two persons at the
same time.
e Remove any loose or bulky items of clothing that
prevent the seat belt from fitting correctly and
restrict your freedom of movement.
e Do not lay the seat belt across hard or breakable
objects (glasses, ball-point pens, pipes, etc.).
These objects may pose an additional risk of
injury.
e Belt straps must not be twisted or loose.
DANGER
Using damaged seat
belts.
Damaged, heavily stressed or worn seat belts do not
offer adequate protection in the event of an
accident.
The seat belt pretensioner system can only be trig-
gered once; the system must then be replaced.
e Check all seat belts regularly for signs of damage
to the fabric and check that the seat-belt buckle
and attachment points function correctly.
e Protect seat-belt buckle from soiling and keep it
clean.
e Have seat belts that are damaged or have been
heavily stressed in an accident replaced
immediately.
The same applies to the seat belt pre-tensioner
systems and force limiters installed on the seats
that have been triggered.
e In addition, have the anchor points of the seat
belts checked.
Visit a qualified specialist workshop. Porsche
recommends a Porsche partner as they have
trained workshop personnel and the necessary
parts and tools.
e Ensure that the seat belts are fully retracted
when not in use to protect them from dirt and
damage.
> Please refer to chapter "Cleaning seat belts" on
page 67.
Seat-belt pre-tensioners
Triggering of the seat-belt pre-tensioners depends
on the severity of the accident.
The seat-belt pre-tensioners can be triggered:
– In front and rear impacts
– In side impacts
– If the vehicle turns over
Information
Smoke is released when the seat-belt pretensioners
are triggered. This does not indicate a fire in the
vehicle.
Observe the seat belt warning
light and warning message
Fig. 176: Seat belt status display in the instrument cluster
A Seat belt status display for the left rear seat
B Seat belt status display for the centre rear seat (de-
pending on the equipment)
C Seat belt status display for the right rear seat
D Warning light: driver's or passenger seat belt not
fastened
Front seats
When the vehicle is ready for operation, red warning
light
D lights up on the instrument cluster and
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Seat Belts
221
stays on until the driver side and occupied passenger
side seat belts have been fastened.
A warning symbol is also displayed on the instru-
ment cluster.
When the speed exceeds approx.
24 km/h (15 mph), a warning message sounds and
red warning light
D on the instrument cluster
flashes if the driver side or occupied passenger side
seat belts are not fastened.
Rear seats
When the vehicle drives off, a seat belt status dis-
play for the rear seats appears for about 60 seconds
in the instrument cluster.
Green symbol
A + B indicates that the person
sitting in the seat in question has fastened their seat
belt.
Red symbol
C indicates that the person sitting in
the seat in question has not fastened their seat belt,
or that the seat is empty. If a seat belt on the rear
seats is opened while the vehicle is moving, a warn-
ing message sounds and the relevant symbol turns
red and flashes for about 60 seconds
.
Adjusting the seat belt
Fig. 177: Adjusting belt height
The height of the belt outlets for the front seats can
be adjusted.
e Adjust the height of the belt outlet so that the
belt runs across the middle of your shoulder, not
against your neck.
a. Upwards – push belt outlet upwards.
b. Downwards – press locking button A and
move belt outlet downwards.
Fastening seat belt
Fig. 178: Fastening seat belt
1. Assume a comfortable sitting position.
2. Adjust the backrest so that the seat belt always
rests on your upper body and runs across the
middle of your shoulder.
3. Grasp the seat belt latch and pull the belt in a
slow, continuous motion across your chest and
lap.
Information
The seat belt may be blocked if the vehicle is stand-
ing at an angle or if the seat belt is pulled out
abruptly.
The seat belt can also jam when accelerating or de-
celerating, when negotiating bends or on inclines.
4. Insert the belt latch into the appropriate seat-
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Seat Belts
222
belt buckle on the inner side of the seat until it
locks with an audible click.
5. Make sure that the seat belt is not trapped or
twisted and that it is not rubbing against sharp
edges.
6. Ensure that the horizontal section of the belt al-
ways fits snugly across the pelvis. Therefore,
after fastening the seat belt, always pull the di-
agonal part of the belt upwards.
Pregnant women: should position the lap belt as
low as possible across the pelvis and ensure that
it is not pressing against the abdomen.
7. Also pull on the diagonal section of the belt now
and again during the journey to ensure that the
horizontal section remains tight.
Opening seat-belt buckle and re-
moving seat belt
Fig. 179: Removing the seat belt
1. Hold the belt latch.
2. Press the red button on the belt buckle.
3. Guide belt latch to approx. 7 cm (2.75 inches)
underneath the belt outlet.
On the front seats and the centre rear seat (de-
pending on the equipment), the belt latch is held
in the end position via a stopper button.
On the outer rear seats, the belt latch is held in an
easily accessible position by a plastic slide (see
graphic).
4. Push the plastic slide under the belt latch (see
graphic).

Popular Owner Manuals