2019-2024 Porsche Taycan 2 Door seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

seats for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
seats
223
seats
Choosing the correct seat position
The correct sitting position is important for safe and
fatigue-free driving. To adjust the driver seat posi-
tion to suit individual requirements, proceed as
follows:
1. Adjust the seat height to ensure that you have
enough headroom and a good overview of the
vehicle.
2. Adjust the seat's fore-and-aft position so that
your legs are not fully straight and your foot is
touching the entire pedal surface when pressing
the pedals fully.
3. Grip the top half of the steering wheel. Set the
backrest angle and the steering wheel position
so that your arms are almost outstretched. Your
shoulders must still rest on the backrest,
however.
4. Adjust the seat's fore-and-aft position if
necessary.
Adjusting the seat
WARNING
Adjusting the seat when
driving
The seat may move further than desired if you at-
tempt to adjust it whilst driving. You may lose con-
trol of the vehicle.
e Do not adjust the seat while driving.
CAUTION
Seat adjustment
If persons or animals are within the range of move-
ment of the seat, there is a risk of parts of the body
being squeezed or crushed when you adjust the seat.
e Adjust the seat so that no-one is put at risk.
NOTICE
Risk of damage to headrests, roof and sun visor.
e Set the seat position to ensure sufficient clear-
ance between the headrest, roof and sun visor.
Adjusting an electric seat
Fig. 180: Adjusting an electric seat
1 Seat angle adjustment
2 Seat height adjustment
3 Thigh support adjustment
4 Seat cushion side bolster adjustment (depending on the
equipment)
5 Seat backrest side bolster adjustment (depending on
the equipment)
6 Fore-and-aft adjustment
7 Backrest angle adjustment
8 Lumbar support adjustment
e Press each control in the direction indicated by
the arrows until the desired setting or the end
position is reached.
Storing seat settings
For information on storing and retrieving the seat
settings:
> Please refer to chapter "Personal settings" on
page 180.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
seats
224
Using the Comfort Entry function
The Comfort Entry function makes it easier for you
to get in and out of the vehicle.
CAUTION
Automatic adjustment of
driver’s seat
Persons behind the driver’s seat may be trapped by
the seat as a result of automatic adjustment of the
driver's seat towards the rear.
e Switch off the Easy Entry function if there is a
person behind the driver’s seat.
Activating function
The Comfort Entry function can be activated in the
central display.
e
e Comfort e Comfort Entry
> Please refer to chapter "Vehicle settings" on
page 257.
Exiting the vehicle
bb Function activated.
e Press the power button, switch off the vehicle
and open the driver's door.
The steering wheel moves upwards.
The driver's seat moves backwards.
Entering the vehicle
bb Function activated.
bb Driver's seat and steering wheel are in their
Comfort Entry positions.
e Close the driver's door, press the power button
and switch on the vehicle.
The driver's seat and steering wheel move to the
stored position.
Information
When the key is changed, the seat and steering
wheel move to the entry position stored on the driv-
er's key.
Information
Manual intervention in the seat setting interrupts the
Comfort Entry function.
e Adjust driving position manually.
Switching seat heating/seat ven-
tilation on and off
Fig. 181: Switching seat heating / seat ventilation on and
off
Fig. 182: Switching rear seat heating on and off
Switching on seat heating/seat ventilation
bb Vehicle ready for operation
e Tap softkey A (seat heating) or B (seat ventila-
tion) — repeatedly, if necessary.
The number of illuminated indicator lights shows
the selected heating or ventilation setting.
Switching off seat heating/seat ventilation
e Tap softkey A (seat heating) or B (seat ventila-
tion) — repeatedly, if necessary — until all pilot
lights go out.
Information
Seat heating is not available when the interior tem-
perature is high.
Seat ventilation is not available when the interior
temperature is below 15 °C.
If the battery voltage is too low, seat heating/seat
ventilation is restricted initially and then switched
off.
Setting front seat heating / seat ventilation
For the front seat heating and seat ventilation, the
balance between the seat surface and backrest can
be set via the central display.
1.
e Comfort e Driver seat/Passenger seat e
Seat heating balance/Seat ventilation balance
2. Set balance.
Setting rear seat heating
For the rear seat heating, the balance between the
seat surface and backrest can be set via the rear
display.
1.
e Seat heating balance left/Seat heating
balance right
2. Set balance.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
seats
225
Using the front seat massage
function (depending on the
equipment)
Switching the massage function on
bb Vehicle ready for operation
e Press the 8 (Fig. 180) button on the corre-
sponding seat.
The massage function is switched on.
A menu for selecting the massage programme is
displayed briefly on the central display.
e Touch the
icon to select the massage
strength.
e Touch the
icon to switch the massage
function on or off.
The massage function switches off automatically
after 10 minutes.
Configuring the massage programme on the
central display
bb Vehicle ready for operation.
1.
e Comfort e Driver seat/Passenger seat e
Massage programme
2. Select the desired massage programme.
Setting the massage strength on the central
display
bb Vehicle ready for operation.
bb Massage programme selected.
1.
e Comfort e Driver seat/Passenger seat e
Massage strength
2. Select the desired massage strength.
Adjusting passenger seat from the
driver's seat
1.
e Comfort e Adjust the passenger seat
2. Set the passenger seat position using the con-
trols on the driver's seat.
To end the adjustment:
e Select Cancel seat adjustment.
Adjusting headrests
Adjusting headrests on front seats
The fore-and-aft position of the headrests on the
front seats can be adjusted.
e Always make sure that the headrest is engaged
correctly.
Fig. 183: Adjusting the fore-and-aft position of headrests
on front seats
Forwards
e Press button A and at the same time pull the
headrest forwards with both hands until the de-
sired setting is reached.
Backwards
e Press button A and at the same time push the
headrest backwards with both hands until the
desired setting is reached.
Adjusting headrests on rear seats
WARNING
Headrest on occupied
centre rear seat in stor-
age position
Driving with headrests not adjusted correctly in-
creases the risk of serious injury.
e If the centre rear seat is occupied, move the
headrest out of its storage position and adjust it
to one of the higher, detent positions.
The height of the headrests on the rear seats can be
adjusted.
e Adjust the height of the relevant headrest so that
the upper edge of the headrest is at eye level. If
eye level cannot be reached, the topmost posi-
tion of the headrest is to be selected.
e Always make sure that the headrest is engaged
correctly.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
seats
226
Fig. 184: Setting the height of the headrests on the rear
seats (example: 3 rear seats)
Raising
e Push headrest upwards until the desired setting
is reached.
Lowering
e Press button A and at the same time push the
headrest downwards until the desired setting is
reached.
To improve your view to the rear, the headrest on the
centre rear seat can be moved to a storage position
that is lower than the lowest usable position.
Removing and installing headrests
on rear seats
The headrests on the rear seats may have to be re-
moved in order to install a child restraint system
correctly.
> Please refer to chapter "Child Restraint Systems
(Child Seats)" on page 87.
WARNING
Headrests on rear seats
removed or not adjusted
correctly
Driving with headrests removed or not adjusted
correctly increases the risk of serious injury.
e If the rear seats are occupied, install the relevant
headrests.
e Adjust the height of each headrest so that the
upper edge of the headrest is at least at eye level
or the headrest has engaged in the topmost
detent.
e Always make sure that the relevant headrest is
engaged correctly.
Fig. 185: Removing and installing headrests on rear seats
Removing
1. Push headrest up as far as it will go.
2. Fold the rear seat backrest roughly half-way
forward.
3. Press buttons A and B and at the same time push
the headrest up until button B remains engaged.
4. Remove the headrest and stow safely in the
vehicle.
5. Fold up and engage the rear seat backrest if
necessary.
WARNING
Swapping headrests
The individual headrests are designed specifically for
use on the respective seats. If headrests are not fit-
ted on the correct seats during re-installation, the
risk of serious injury is increased.
e Ensure that the headrests are not interchanged
during re-installation.
Installing
1. Fold the rear seat backrest roughly half-way
forward.
2. Insert headrest into the guides and push it down
until it engages with an audible click.
3. Press button A and push the headrest down fully.
It should no longer be possible to pull the head-
rest out of the backrest.
4. Fold up and engage the rear seat backrest.
Folding the rear seat backrest
forward
The rear seat backrests can be folded forward indi-
vidually to make the luggage compartment larger.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
seats
227
NOTICE
Risk of damage from objects on the rear seats.
e Do not place objects on the seats when folding
the backrests forward.
Information
The backrests on the left and centre rear seats are
joined together. When you fold the left backrest
forward, the centre backrest will also fold over.
The centre rear-seat backrest can also be folded
forward separately (depending on fittings).
Folding outer rear seat backrests forward
Fig. 186: Folding outer rear seat backrests forward
1. Push the headrests down.
> Please refer to chapter "Adjusting headrests"
on page 225.
2. Bush the release button A and fold the backrest
forwards.
Folding the backrest on the centre rear seat
forward
Fig. 187: Folding the backrest on the centre rear seat
forward
bb Vehicles with 3 rear seats
e Actuate release handle A in direction of arrow
and fold the backrest forward.
Returning rear seat backrests to the upright
position
WARNING
Seat backrest not en-
gaged correctly
If the rear seat backrests are not engaged correctly,
they can fold forwards unintentionally while the
vehicle is moving.
If the red marking B is still visible, the seat backrest
is not engaged correctly.
e Make sure that the red marking B is no longer
visible after the seat backrest has engaged.
e Release the seat backrest and engage it again if
necessary.
e Fold up the backrest until it locks with an audible
click. Make sure that the seat belts are not
trapped.

Related Topics

Popular Owner Manuals