
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Windows
277
Windows
Opening and closing side windows
WARNING
Opening and closing the
side windows
When opening or closing the side windows, particu-
larly in one-touch mode, parts of the body may get
trapped between the moving side window and fixed
vehicle parts.
e When opening and closing the side windows,
make sure that no parts of the body can become
trapped between the moving side window and
fixed vehicle parts.
e Push the power button and switch off the vehicle
when you leave the vehicle. Uninformed persons
could injure themselves by operating the power
windows.
e In the event of danger, immediately release the
button on the driver’s key or the proximity sensor
in the door handle on vehicles with Comfort
Access.
e Do not leave children in the vehicle unattended.
WARNING
Closing a side window
manually
If one-touch operation has been disabled following
blockage of a side window, the side window shuts
with its full closing force during manual closing.
Parts of the body that become trapped between the
moving side window and fixed vehicle parts may be
crushed.
e Make sure that nobody is trapped or crushed
when closing the side windows.
Information
If a side window is blocked by an object during
closing, it will stop and open again by several
centimetres.
If the side window is blocked a second time within
approx. 10 seconds, one-touch operation will be
disabled for this window. The side window can be
closed manually. One-touch operation is enabled
again once the side window has been closed com-
pletely using the manual closing function.
Opening and closing side windows
Fig. 220: Power window buttons in the driver's door
A Power window, front, driver's side
B Power window, front, passenger's side
C Power window, rear, driver's side
D Power window, rear, passenger's side
E Child protection safety button
bb Operational readiness established.
– or –
bb The vehicle is turned off, but not for longer than
10 minutes.
bb Driver's or passenger's door not yet opened.
The rocker switches have a two-stage function.
When actuating the buttons, both positions can be
clearly felt through resistance when pulling or
pressing.
First setting – manual operation
e Press or pull the relevant rocker switch to the
first setting until the desired position is reached.
The process stops when the switch is released.
Second setting – one-touch operation
e Briefly push or pull the relevant rocker switch all
the way to the second setting.
The side window opens or closes automatically
to the end position.
e Actuate the button again to stop the side win-
dow at the desired position.
The window closes faster during one-touch opera-
tion than during manual operation.