
Your first trip
25
Fig. 3: Engaging the parking lock
– To drive forward, select drive position D.
– To interrupt the supply of energy to the vehicle's
drivetrain, select drive position N.
– To drive in reverse, select drive position R.
– After you have parked the vehicle, select drive
position P.
E-Sound in the electric vehicle
WARNING
Reduced driving noise in
electric vehicles
Even when E-Sound is switched on in accordance
with legal requirements, an electric vehicle produces
very little driving noise, which means that other road
users might not even hear it. There is therefore a risk
of accidents, particularly in areas with traffic calm-
ing, while manoeuvring or parking.
e Be particularly alert while driving!
Electric vehicles are fitted with an E-Sound system.
The synthesised E-Sound is a legal requirement and
is designed as an audible sound to warn pedestrians
about the vehicle. The E-Sound system cannot be
switched off because it is legally required.
bb The vehicle drives at a speed of less than 20 km/
h (12 mph).
Drive-away behaviour of the electric vehicle
The creep function allows the vehicle to drive away
automatically from a standstill when the brake pedal
is released if drive position D or R is selected.
Information
The vehicle moves (creeps) when the drive position
is engaged. To prevent unintentional creeping, only
release the brake when you want to drive away.
Charging the high-voltage battery
DANGER
Incorrect charging
An incorrect charging process, non-observance of
the generally applicable safety precautions and im-
proper handling of the high-voltage battery can
cause electric shocks, short circuits, explosions, fire
or burns.
e Before starting the vehicle, remove the vehicle
charging cable, close the cover and charge port
door and store the vehicle charging cable in a
safe place.
e Always observe the specified sequence when
charging the high-voltage battery. Do not unplug
the vehicle charging cable from the electrical
socket during the charging process. Finish
charging before disconnecting the vehicle
charging cable from the electrical socket.
e Observe the safety notes in the instructions for
the Porsche charging equipment.
e Do not work in or on the vehicle during the
charging process.
e Never charge the vehicle at both charge ports at
the same time.
DANGER
Unsuitable or damaged
electrical sockets and
vehicle charging cables
The use of unsuitable or damaged electrical sockets
and vehicle charging cables and improper handling
of the high-voltage battery can cause electric
shocks, short circuits, explosions, fire or burns.
e Only use vehicle charging cables that have been
tested and approved by the manufacturer for
charging the high-voltage battery in an electric
vehicle.
e Always carry along the charging equipment that
is suitable for the country you are driving in.
e Only connect vehicle charging cables to electri-
cal sockets that were installed professionally.
e Do not connect vehicle charging cables to dam-
aged or dirty electrical sockets.
e Do not use a damaged vehicle charging cable.
e Do not use extension cables, cable reels, multiple
sockets or travel adapters.
e Do not modify or repair any of the electrical
components.
e Protect electrical sockets and plug connections
from water, moisture and other fluids and liquids.
e Do not use sharp-edged or pointed objects to
remove dirt, ice and snow from the charging
socket.
e Never insert objects into the charge port on the
vehicle.