2025-2026 Porsche Taycan 2 Door Flat Tyre User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Flat Tyre for Your Porsche Taycan 2 Door Second Generation (2025-2026)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Flat Tyre
114
Flat Tyre
Depending on the model and vehicle equipment, the
vehicle may come with either a tyre sealing com-
pound kit or a spare wheel.
Responding to Tyre Pressure
Monitoring warning messages
If the Tyre Pressure Monitoring system has detected
a severe pressure loss, a message appears on the
instrument cluster. Pressure loss can be an indica-
tion of damage to the tyres.
e Stop in a suitable place and check the indicated
tyre for damage.
> Please refer to chapter "Tyres and Wheels" on
page 249.
Parking the vehicle safely
1. Stop the vehicle as far away from the driving lane
as possible. The vehicle must be parked on a firm
and flat surface that is skid-proof.
2. Switch hazard warning lights on.
3. Activate the parking brake.
4. Straighten the front wheels.
5. Get all passengers to leave the vehicle. Pay at-
tention to the traffic as they do so.
6. Set up the warning triangle at a suitable
distance.
7. Secure the vehicle to prevent it from rolling
away, e.g. by means of wedges under the wheels
on the diagonally opposite side.
> Please refer to chapter "Jack and Lifting Plat-
form" on page 138.
Sealing defective tyres
bb Vehicles with tyre sealant.
WARNING
Temporarily repaired
tyres
Damaged tyres with tyre sealing compound can
burst or lose pressure if the vehicle is driven at an
inappropriate speed or under continuous load.
e Sealing the tyre with tyre sealing compound is
only an emergency solution to enable you to
drive to the nearest specialist workshop.
e Use tyre sealing compound only for cuts or
punctures no larger than 4 mm.
e Never use tyre sealing compound if the rim is
damaged.
e Have the tyre replaced by a specialist workshop
as soon as possible. Inform the specialist work-
shop that the tyre contains tyre sealing
compound.
e Tyres must not be repaired.
e Avoid hard acceleration and high cornering
speeds.
e Do not drive faster than the maximum permitted
speed of 80 km/h (50 mph).
e Read and follow the safety and operating in-
structions, which can be found in the separate
operating instructions for the tyre sealing com-
pound and compressor.
In the event of a flat tyre, tyre damage can be tem-
porarily sealed using the tyre sealant provided in the
vehicle.
The tyre sealant set and the compressor that goes
with it are located in the front luggage
compartment.
> Please refer to chapter "Luggage compartment"
on page 153.
Filling in tyre sealant
WARNING
Flammable and harmful
sealant
The sealant is highly flammable and harmful to
health.
e Fire, naked flames and smoking are prohibited
when handling tyre sealant.
e Avoid contact with skin, eyes and clothing.
e Keep tyre sealant away from children.
e Do not inhale vapours.
CAUTION
In the event of contact
with tyre sealing
compound:
Irritation or allergic reactions after contact with tyre
sealant.
e Avoid contact with skin, eyes and clothing.
e If tyre sealing compound gets on your skin or into
your eyes, thoroughly rinse the affected part of
your body immediately with plenty of water.
e Change soiled clothing immediately.
e Consult a doctor immediately in the event of an
allergic reaction.
e If tyre sealant is swallowed, thoroughly rinse out
the mouth without delay and drink plenty of
water. Do not induce vomiting. Consult a doctor
immediately.
WARNING
Failure to detect pres-
sure loss in the tyre
A tyre pressure sensor that is soiled with tyre sealant
cannot determine the tyre pressure correctly.
e When the defective tyre is changed, have the
tyre pressure sensor replaced as well.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Flat Tyre
115
Fig. 83: Filling in tyre sealant
A Filler bottle
B Filler hose
C Filler hose plug
D Valve turner
E Valve insert
F Tyre valve
Preparing to fill
1. Leave the object that caused the puncture in the
tyre.
2. Remove the tyre sealant and the enclosed sticker
from the left-hand box in the front luggage
compartment.
> Please refer to chapter "Luggage compart-
ment" on page 153.
3. Affix the sticker in the driver’s field of vision.
Filling in tyre sealant
> Follow the separate operating instructions for
using the tyre sealant.
1. Shake filler bottle A.
2. Screw filler hose B onto the filler bottle.
The filler bottle is open.
3. Unscrew valve cap from the tyre valve F.
4. Remove valve insert E from the tyre valve with
valve turner D.
If a replacement valve insert is not available,
keep the valve insert in a clean, dry place.
5. Remove plug C from the filler hose B.
6. Push the filler hose onto the tyre valve.
7. Hold the filler bottle higher than the level of the
tyre valve and squeeze it forcefully until the bot-
tle is completely emptied into the tyre.
8. Pull the filler hose off the tyre valve.
9. If available, screw the replacement valve insert or
alternatively valve insert E with valve turner D
firmly into the tyre valve.
Inflating the tyres
> Read and follow the operating instructions on the
compressor.
1. Remove the compressor from the right-hand box
in the front luggage compartment.
> Please refer to chapter "Luggage compart-
ment" on page 153.
2. Connect the compressor to a plug socket in the
vehicle and inflate the tyre to at least 2.5 bar (
36 psi). If this tyre pressure cannot be reached,
the tyre is too severely damaged. You must not
continue driving with this tyre.
3. Screw valve cap onto the tyre valve F.
Checking pressure
e Check the tyre pressure after driving for approx.
10 minutes. If the tyre pressure is less than
1.5 bar (22 psi), do not continue driving.
> Please refer to chapter "Technical Data" on
page 308.
Changing tyres
> Please refer to chapter "Changing tyres and
wheels" on page 252.
Updating the Tyre Pressure Monitoring tyre
settings after changing a wheel
> Please refer to chapter "Tyres and Wheels" on
page 249.
Using the spare wheel
bb Vehicles with a spare wheel.
WARNING
Changed vehicle
handling
The use of a spare wheel can impair vehicle handling.
e The spare wheel must be used only over short
distances in cases of emergency.
For safety reasons, replace the tyres before the
wear indicators appear (webs in the tyre grooves,
1.6 mm high).
e Never deactivate the Porsche Stability Manage-
ment (PSM) system.
e Avoid hard acceleration and high cornering
speeds.
The admissible maximum speed is
80 km/h (50 mph) and must not be exceeded
due to changed vehicle characteristics and wear.
e Do not use a spare wheel from a different vehicle
type.
e Do not fit the spare wheel from your vehicle on a
different vehicle.
e Only fit one spare wheel on the vehicle at any
time.
The collapsible spare wheel is located in the boot.
> Please refer to chapter "Changing a wheel" on
page 255.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Flat Tyre
116
> Please refer to chapter "Inflating tyres" on
page 251.
After using the collapsible spare wheel
e Stow the spare wheel in the boot again for
transport.
If the spare wheel is defective:
e Visit a qualified specialist workshop. Porsche
recommends a Porsche partner as they have
trained workshop personnel and the necessary
parts and tools.

Popular Owner Manuals