2025-2026 Porsche Taycan 2 Door Starting, driving and stopping the vehicle -> Stop, park and exit the vehicle User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting, driving and stopping the vehicle -> Stop, park and exit the vehicle for Your Porsche Taycan 2 Door Second Generation (2025-2026)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Starting, driving and stopping the vehicle
238
between overrun recuperation and braking
recuperation:
– Overrun recuperation starts as soon as you take
your foot off the accelerator pedal and slows
down the vehicle. You can configure the overrun
recuperation strength.
– When you press the brake, braking recuperation
increases the amount of recuperated energy to a
maximum. A higher braking request is then
achieved using the vehicle's wheel brakes.
Overrun recuperation settings
The following overrun recuperation settings can be
selected:
Set-
ting
Dis-
play
Meaning
Off No dis-
play
No overrun recuperation.
Vehicle coasting.
On
Overrun recuperation with
moderate deceleration of
the vehicle.
Auto
Variable adaptation of over-
run recuperation based on
data relating to the area
around the vehicle.
Information
The deceleration effect of overrun recuperation can
be limited if the charge state of the high-voltage
battery is high, for example.
e Compensate for reduced overrun recuperation by
pressing the brake if necessary.
The overrun recuperation strength is displayed in
the power meter.
Selecting overrun recuperation level
e Press the recuperation button on the steering
wheel:
– Quick press = Switch overrun recuperation on
and off
– Press and hold = Switch automatic overrun
recuperation (Auto) on and off
– or –
e Drive e Recuperation (accelerator pedal)
The selected setting is shown on the instrument
cluster.
Information
Automatic overrun recuperation is only available
when PSM is active. Automatic overrun recuperation
is not available in "PSM SPORT" mode.
Information
The various overrun recuperation settings are as-
signed to the driving modes, but can also be freely
selected by the driver.
Personalisation is possible in the INDIVIDUAL driving
mode.
Driving in coasting mode
"Coasting" is the term used to describe driving
without the braking effect of overrun recuperation.
This function is designed to increase efficiency by
reducing power consumption and increasing the
range. Coasting occurs after the accelerator pedal is
fully released slowly. Coasting ends when the accel-
erator pedal is pressed.
bb Driving in transmission range D.
bb PSM is active.
bb No severe uphill or downhill gradients.
bb Recuperation is switched off.
e Slowly remove your foot from the accelerator
pedal.
Information
Coasting mode is also possible in "SPORT" and
"SPORT PLUS" driving modes. The overrun recuper-
ation setting that is activated as standard for these
driving modes must be switched off when selecting
these modes.
Stop, park and exit the vehicle
WARNING
Inactive power steering
and brake booster
The power steering and brake booster are only ef-
fective when the vehicle is ready for operation. If the
vehicle is not ready for operation, much greater force
is required to turn the steering wheel or brake.
e Only turn the vehicle off when it is stationary.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Starting, driving and stopping the vehicle
239
WARNING
Danger of the vehicle
rolling away
In the following situations, the parking brake is not
active and the vehicle may roll away.
– Leaving the vehicle with the N drive position
engaged.
– If the driver door is opened and the driver's seat
belt is unfastened, the parking brake is deacti-
vated when the brake pedal is applied and the D
or R drive position is selected again.
This can result in injury and damage to the vehicle. A
warning about the danger of the vehicle rolling away
is displayed on the instrument cluster.
e Before leaving the vehicle, activate the parking
brake by pressing the P button.
Stopping the vehicle
e For a brief stop (e.g. at traffic lights), leave the
selector lever in the D drive position and hold the
vehicle with the brake pedal.
e The HOLD function actively holds the vehicle
automatically at a standstill after braking to a
stop on an incline.
Parking the vehicle
Selecting the P drive position secures the vehicle
against rolling away.
Activating the P drive position manually
Fig. 196: Parking lock and electric parking brake button
bb Hold the vehicle still by pressing the brake pedal.
e Press the P button.
The parking lock and the electric parking brake
are activated simultaneously.
The brake warning light
and the P drive po-
sition display light up on the instrument cluster
Activating the P drive position automatically
bb Hold the vehicle in place by pressing the brake
pedal.
bb D or R drive position selected.
e Open the driver’s door and driver side seat belt.
The parking lock and the electric parking brake
are activated automatically.
The brake warning light
and the P drive po-
sition display light up on the instrument cluster
– or –
e Turn off the vehicle using the power button.
The parking lock is activated automatically.
The P drive position display lights up on the in-
strument cluster.
The parking brake is also activated when parking
the vehicle on inclines and gradients of over 8%.
The brake warning light
lights up.
WARNING
Electric parking brake is
deactivated
If the vehicle is turned off using the power button on
an incline or gradient, the electric parking brake may
not be activated (e.g. in the case of a slight incline or
gradient). The vehicle can roll away.
e Always press the P button to activate the parking
brake on inclines and gradients before turning off
the vehicle.
Activating and deactivating the electric parking
brake manually.
The electric parking brake can be activated or deac-
tivated on the central display independently of the P
drive position.
e
e Setting e Vehicle e Electric parking
brake
The brake warning light
lights up or goes out.
Responding to warning messages
The brake warning light
flashes if the electric
parking brake has not been applied fully in a sta-
tionary vehicle.
If it was not possible to activate the parking lock, a
warning appears in the instrument cluster.
Always heed any warning and information messages
displayed in the vehicle.
> Please refer to chapter "Warn- und Information-
smeldungen" on page 271.
Turn off the vehicle and get out.
bb Parking lock and parking brake activated.
e Exit and lock the vehicle.
The vehicle is turned off.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Starting, driving and stopping the vehicle
240
Information
If you do not exit the vehicle, the vehicle may also be
turned off by pressing and holding the power button
(approx. 1 second).
Information
The vehicle is turned off automatically in the follow-
ing situations:
– after 30 minutes
– Battery charge level below minimum limit
Additional information
Leaving the vehicle in drive position N
In drive position N, driving readiness is switched off
after 30 seconds in the following situations:
– Parking brake is not activated
– Driver’s door is opened and driver’s seat belt is
not fastened
– Brake pedal is not pressed

Related Topics

Popular Owner Manuals