Cruise control
RES (2) should be used only if the
driver is aware of the set speed and
intends to return to it.
CRUISE ECO DATA
Diesel only
It is not recommended to resume set
speed when a low gear is selected as
excessive engine speeds will occur.
AUTOMATIC SWITCH OFF
Cruise control will switch off but the set speed
will remain in the memory when:
ꢀ
ꢀ
ꢀ
ꢀ
The CAN button (3) is pressed.
The brake pedal is pressed.
Speed falls below 30km/h (18mph).
Neutral, Park or Reverse gear is selected
on vehicles with automatic transmission.
ꢀ
ꢀ
Dynamic Stability Control is operating.
When enabled, a CO2 emission indicator is
displayed in the message centre. The higher
the numeric reading, the more CO2 is being
emitted and the more fuel is being used. See
56, VEHICLE INFORMATION AND SETTINGS
MENU.
The difference between the actual and set
speed is too great.
ꢀ
ꢀ
The vehicle reaches a speed of 170km/h
(105.6mph).
The accelerator pedal is used to accelerate
beyond the set speed for too long a period.
Cruise control will switch off and clear the
memory when:
ꢀ
ꢀ
The ignition system is switched off.
A fault occurs. The cruise control system
will switch off and cannot be used until the
fault is cleared.
90
English 
