2019-2026 Renault Captur SUV Technical Specifications User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Technical Specifications for Your Renault Captur SUV Second Generation (2019-2026)

Section 6: Technical Specifications  
Vehicle identification plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Technical Information for the emergency services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Engine identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Engine specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Towing weights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
6.2  
6.3  
6.4  
6.5  
6.6  
6.9  
6.9  
Replacement parts and repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.10  
Service sheets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.11  
Anticorrosion check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.17  
6.1  
VEHICLE IDENTIFICATION PLATES  
A
1
2
3
4
5
6
A
10  
9
7
8
The information shown on the ve-  
hicle identification plate should be  
quoted on all correspondence or  
orders.  
4 MMAC (Maximum permissible  
all-up weight).  
5 MTR (Gross train weight: vehicle  
fully loaded, with trailer).  
6 MMTA (Maximum Permissible  
Weight) front axle.  
7 MMTA rear axle.  
The presence and location of the in-  
formation depends on the vehicle.  
8 Reserved for related or additional  
entries.  
Vehicle identification plate A  
1 Manufacturer name.  
2 EC design number or approval  
number.  
3 Identification number.  
Depending on the vehicle, this  
information is also given on  
marking B.  
9 Diesel exhaust emissions.  
Depending on the vehicle, this  
information is not indicated on  
the manufacturer’s plate but on  
the engine smoke opacity label  
2.18.  
B
10 Paint reference (colour code).  
6.2  
TECHNICAL INFORMATION FOR THE EMERGENCY SERVICES  
A
A
The QR Code on the A label allows  
emergency workers using a tablet or  
smartphone to immediately access the  
technical information useful for working  
on the vehicle in the event of an acci-  
dent.  
Ensure that the A label is always visible  
and present on the windscreen as well  
as the rear screen.  
Any modification or damage would  
prevent access to the information.  
6.3  
ENGINE IDENTIFICATION  
A
1
2
3
A
A
Please quote the engine identifica-  
tion information in area A in all cor-  
respondence or orders.  
(Location varies depending on engine)  
1 Engine type.  
2 Engine suffix.  
3 Engine serial number.  
A
A
6.4  
DIMENSIONS (in metres)  
0,876  
2,639  
0,712  
1,554  
4,227  
1,576* à 1,585*  
1,541  
2,003  
* unladen  
6.5  
ENGINE SPECIFICATIONS (1/3)  
Versions  
1.6 SCe  
1.0 TCe  
1.3 TCe  
1.5 dCi  
Engine type  
(see engine plate)  
H4M  
1598  
H4D Turbo  
999  
H5H Turbo  
1330  
K9K Turbo  
Cubic capacity (cc)  
1461  
Type of fuel  
Petrol  
Diesel  
Octane rating  
You must use unleaded petrol with the octane The label located in the fuel filler flap indicates  
rating stated on the label inside the fuel filler the authorised fuels.  
flap. 1.108.  
6.6  
ENGINE SPECIFICATIONS (2/3)  
Versions  
1.6 SCe  
1.0 TCe  
1.3 TCe  
1.5 dCi  
Engine type  
(see engine plate)  
H4M  
1598  
H4D Turbo  
999  
H5H Turbo  
1330  
K9K Turbo  
1461  
Cubic capacity (cc)  
Fuel types that meet  
European standards and are  
compatible with the engines  
of vehicles sold in Europe  
(in any other case, contact an  
Approved Dealer).  
Unleaded petrol compliant with  
standard EN 228 contains up  
to 5% ethanol in volume.  
Diesel fuel compliant with stand-  
ard EN 590 contains up to 7%  
fatty acid methyl ester in volume.  
Unleaded petrol compliant with  
standard EN 228 contains up  
to 10% ethanol in volume.  
Diesel fuel compliant with stand-  
ard EN 16734 contains up to 10%  
fatty acid methyl ester in volume.  
Diesel fuel compliant with stand-  
ard EN 15940 contains up to 7%  
acid methyl ester in volume.  
6.7  
ENGINE SPECIFICATIONS (3/3)  
Versions  
1.6 SCe  
1.0 TCe  
1.3 TCe  
1.5 dCi  
Engine type  
(see engine plate)  
H4M  
1598  
H4D Turbo  
999  
H5H Turbo  
1330  
K9K Turbo  
1461  
Cubic capacity (cc)  
Spark plugs  
Only use the spark plugs specified for your vehicle’s  
engine.  
The type should be marked on a label affixed inside  
the engine compartment. If it is not then contact an  
approved Dealer.  
Fitting spark plugs other than those specified may  
damage the engine.  
6.8  
WEIGHTS (in kg)  
The weights indicated for a basic vehicle without options: they vary depending on your vehicle’s equipment. Consult  
your approved Dealer.  
Maximum Authorised Mass (MMAC)  
Maximum Permissible Weight (MMTA)  
Gross Train Weight (MTR)  
Weights indicated on the vehicle identification plate 6.2  
Braked Trailer Weight*  
found by calculating: MTR - MMAC  
Unbraked Trailer Weight*  
630 kg  
Permissible nose weight*  
75 kg  
Maximum permissible load on roof  
80 kg (including carrying device)  
* Towing weight (towing a caravan, boat, etc.)  
Towing is prohibited when the MTR - MMAC calculation is equal to zero, or when the MTR is equal to zero (or is not listed) on  
the identification plate.  
– It is important to comply with the towing weights, governed by local legislation in each country and, in particular, laid down in  
the Road Traffic Regulations. Contact an approved Dealer about any towing equipment.  
– When towing, under no circumstances may the total train weight (vehicle + trailer) be exceeded. However the following is  
permitted:  
– rear axle MMTA exceeded by no more than 15%,  
– maximum MMAC exceeded by no more than 10% or 100 kg (whichever is reached first).  
In either case, the maximum speed of the vehicle and trailer must not exceed 60 mph (100 km/h) and the tyre pressures must  
be increased by 0.2 bar (3 PSI).  
– The engine output and climbing capability are reduced with altitude. We recommend that the maximum load be reduced by  
10% at an altitude of 1,000 metres and by an additional 10% for each 1,000 metres thereafter.  
6.9  
REPLACEMENT PARTS AND REPAIRS  
Original parts are based on strict specifications and are subject to highly-specialised tests. Therefore, they are of at least the same  
level of quality as the parts fitted originally.  
If you always fit genuine replacement parts to your vehicle, you will ensure that it performs well. Furthermore, repairs carried out  
within the manufacturer’s Network using original parts are guaranteed according to the conditions set out on the reverse of the  
repair order.  
6.10  
SERVICE SHEETS (1/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.11  
SERVICE SHEETS (2/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.12  
SERVICE SHEETS (3/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.13  
SERVICE SHEETS (4/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.14  
SERVICE SHEETS (5/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.15  
SERVICE SHEETS (6/6)  
VIN: ..................................................................................  
Date:  
Type of operation:  
Miles (Km):  
Invoice number:  
Invoice number:  
Invoice number:  
Comments/miscellaneous  
Comments/miscellaneous  
Comments/miscellaneous  
Stamp  
Stamp  
Stamp  
Service  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
Date:  
Type of operation:  
Service  
Miles (Km):  
.......................................  
Anti-corrosion check:  
OK □  
Not OK* □  
*See specific page  
6.16  
ANTICORROSION CHECK (1/5)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.17  
ANTICORROSION CHECK (2/5)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.18  
ANTICORROSION CHECK (3/5)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.19  
ANTICORROSION CHECK (4/5)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.20  
ANTICORROSION CHECK (5/5)  
If the continuation of the warranty is subject to repair, it is indicated below.  
VIN: ..........................................................  
Corrosion repair operation to be carried  
out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
Repair to be carried out:  
Stamp  
Date of repair:  
6.21  
6.22  

Related Topics

Popular Owner Manuals