REAR BENCH SEAT: functions
1
C
2
A
B
The seat base and the seatback may
be folded down (one or both sections)
to allow bulky objects to be carried.
Then lift up the rear section of
cushion 1 and tilt the seat base so that
it is next to the front seats.
To fold down the seatback
Remove the rear headrests (if
fitted).
Start by folding down the seat base,
then the seatback.
Ensure that the front seats are far
enough forward.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
To fold away the seat base
Place the seat belts in their guides B.
Lift up the front of the seat cushion A
until it reaches the stop.
Press button 2 and lower the seat-
back C.
The configuration of the two seat
bench with the small seatback C
pulled down, does not allow the
central seat to be used as it would
be impossible to buckle the seat belt
(belt buckles inaccessible).
Where the bench seat is in one section,
check that the two sides of the seat
base are correctly locked.
Before moving the seatback, put
the seat belt in belt guide B to avoid
damaging it.
3.29
English 
