ENGINE OIL LEVEL: topping up, filling, draining (1/3)
2
1
1
2
1
2
– Unscrew cap 1;
Topping up/filling
– top up the level (capacity between
“mini” and “maxi” of the gauge 2 and
between 0.9 to 2 litres according to
the engine);
The vehicle must be parked on level
ground and the engine should be cold
(for instance, before the engine is
started up for the first time in the day).
– wait for approximately 20 minutes to
allow the oil to flow into the engine;
Filling-up
engine oil
Before carrying out any
action in the engine com-
partment, you must switch
off the ignition. ➥ 2.4 or
➥ 2.6.
– check the level using the dipstick 2
(as described above).
Use a funnel or protect the
filling neck area to avoid engine
oil escaping onto a hot part of the
engine compartment or a sensitive
part (e.g. electrical components).
Once the operation has been com-
pleted, ensure that the dipstick is
pushed in as far as it will go or that the
cap-type dipstick is completely screwed
in.
Fire hazard.
Do not exceed the max level and
do not forget to refit cap 1 and dip-
stick 2.
4.5
English 
