Get Your Comfort Guide for Renault Clio 4 Door Fifth Generation (2019-2025)

Section 3: Your Comfort

MULTI-SENSE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Air Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manual air conditioning, heating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2

3.4

3.6

Automatic climate control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.12

Air conditioning: information and advice on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16

Air conditioning: information and advice on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.17

Multimedia equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.18

Electric windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.20

Sun visor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.23

Interior lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.24

Passenger compartment storage, fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.27

Accessories socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.32

Rear headrests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.33

Rear bench seat: functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.34

Luggage compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.35

Rear parcel shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.36

Luggage compartment storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.37

Transporting objects in the luggage compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.38

Transporting objects: towbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.39

Roof bars, spoiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.40

3.1

MULTI-SENSE (1/2)

The “MULTI-SENSE” system enables

a choice between three driving modes

that can be used to control driving,

ambient lighting, comfort and engine

sound (depending on the vehicle):

– the “Eco” and “Sport” modes are

preconfigured and can be partially

customised (ambient lighting etc.) ;

– the “My Sense” mode is customis-

able.

“Eco” mode

MULTI-SENSE

“Eco” mode focuses on energy saving.

The steering is smooth, engine and

gearbox management enable fuel con-

sumption to be reduced ➥ 2.28.

The drive modes affect the:

– power-assisted steering;

– Electronic Stability Program;

– the response of the engine and gear-

box.

Mode configuration

They also affect the:

– the lighting in the passenger com-

partment and of the instrument

panel;

– information displayed on the multi-

media screen and, depending on the

mode selected, on the instrument

panel;

– depending on the vehicle, the engine

sound.

In all modes, it is possible to change

the colour of the ambient lighting

and to reset the settings to default.

The instrument panel style can be

modified only using “My Sense”

mode.

Engine settings are specific to each

of the driving modes and cannot be

customised.

3.2

MULTI-SENSE (2/2)

“Sport” mode

This mode enables an increased re-

sponsiveness from the engine and the

gearbox. The steering is firmer.

1

“My Sense” mode

Using standard default vehicle settings,

this mode can be used to manually con-

figure driving, ambient lighting, comfort

and engine sound (depending on the

vehicle).

2

Accessing the menu

You can access “MULTI-SENSE” (de-

pending on the vehicle):

– from the multimedia screen 1;

– using the 2 switch.

Please refer to the multimedia instruc-

tions for further information.

After the engine is switched off, the

vehicle will always restart in “My

Sense” mode.

3.3

AIR VENTS, air outlets (1/2)

5

3

4

6

2

1

7

8

7

6 Right-hand air vent

7 Passenger footwell heater outlets

8 Control panel

1 Left-hand air vent

2 Left-hand side window demisting

vent

9

9 Footwell heater outlets for rear

passengers (depending on the

vehicle)

3 Windscreen demisting vents

4 Centre air vents

5 Right-hand side window demister

outlet

3.4

AIR VENTS, air outlets (2/2)

10

6

9

4

Centre 4 and side vents 1

and 6

Rear seats

(depending on vehicle)

Passenger footwell heater outlets 9.

Air flow

To close: move the cursor 10 towards

the outside of the vehicle beyond the

resistance point.

To open: move the cursor 10 towards

the inside of the vehicle.

Direction

Do not add anything to the

vehicle’s ventilation circuit

(for example, to remove

bad odours).

Move the cursor 10 to the desired po-

sition.

Do not attach any objects to the air

vents (e.g. telephone mounting).

There is a risk of damage or of

fire.

Risk of damage.

3.5

MANUAL AIR CONDITIONING, HEATING SYSTEM (1/6)

A

Distribution of air in the

passenger compartment

There are five air distribution options.

Turn control 1 to choose the distribution

option.

3

4

2

5

6

1

The air flow is directed to the

windscreen and the front side

window demisting vents.

W

The air flow is distributed be-

tween front side window de-

misting vents, the windscreen demist-

ing vents and the footwells.



The air flow is directed mainly

towards the footwells.





Controls A

(depending on vehicle)

The air flow is directed to-

wards the dashboard air vents,

the front footwells and, depending on

the vehicle, the second row footwells.

1 Distribution of air in the passenger compartment.

2 De-icing/demisting of the rear screen and, depending on the vehicle, the rear view

The air flow is mainly directed

to the dashboard air vents.

mirrors.

J

3 Adjusting the ventilation fan speed.

4 Air recirculation.

5 Adjusting the air temperature.

6 Air conditioning.

3.6

MANUAL AIR CONDITIONING, HEATING SYSTEM (2/6)

Switching air conditioning on

or off

7

B

6

3

1

Activation is not possible if the 3 control

is set to “0” (control A) or “OFF” (con-

trol B).

5

Press the 6 button to deactivate the air

conditioning. The button’s warning light

will go out.

The air conditioning system is used

for:

– lowering the temperature inside the

passenger compartment;

4

2

– eliminating condensation more

quickly.

Controls B

(depending on the vehicle)

1 Distribution of air in the passenger compartment.

2 De-icing/demisting of the rear screen and, depending on the vehicle, the rear view

mirrors.

3 Adjusting the ventilation fan speed.

4 Air recirculation.

5 Adjusting the air temperature.

6 Air conditioning control.

7 “Clear View” function.

3.7

MANUAL AIR CONDITIONING, HEATING SYSTEM (3/6)

Stopping the system

Air recirculation (isolation of

the passenger compartment)

Air recirculation is for:

Switching air conditioning on

or off

In automatic mode, the system switches

the air conditioning system on or off,

depending on the climate conditions.

Turn the 3 control to “OFF” or “0” to

switch off the system or press the 4

button. To start it, turn the 3 control to

adjust the fan speed.

– isolating the vehicle from the exter-

nal atmosphere (driving in polluted

areas, etc.);

Activation is not possible if the 3 control

is set to “0” (control A) or “OFF” (con-

trol B).

Clear View function

Press the 7 button: the integrated indi-

cator light comes on.

– to cool the passenger compartment

temperature more quickly when air

conditioning is activated.

Press the 6 button to deactivate the air

conditioning. The button’s warning light

will go out.

This function quickly demists and de-

ices the windscreen, the rear screen,

the front side windows, and the door

mirrors (depending on the vehicle). It

automatically activates the air condi-

tioning and rear screen de-icing func-

tions.

This function is managed automatically

but you can also activate it manually. In

this case, the operation is confirmed by

the button’s warning light 4.

The air conditioning system is used

for:

Manual use

– lowering the temperature inside the

passenger compartment;

Press button 4, the button’s warning

light comes on.

Press button 2 to stop the heated rear

screen operating, and the integrated in-

dicator goes out.

– eliminating condensation more

quickly.

Prolonged use of this position may lead

to odours, caused by non-renewal of

air, and the formation of condensation

on the windows. To avoid this, air recir-

culation is disabled automatically after

a certain time.

To exit this function, press button 7

or 5.

Fuel consumption increases when

the air conditioning is being used

(switch it off when it is not required).

Using the demisting/de-icing func-

tion will disable the air recirculation.

3.8

MANUAL AIR CONDITIONING, HEATING SYSTEM (4/6)

4

6

1

Switching the air

recirculation on

Press button 4: the button’s warning

light comes on. Under these conditions,

air is taken from the passenger com-

partment and is recirculated, with no air

being taken from outside the vehicle.

If the air conditioning is not acti-

Air recirculation is for:

vated (“A/C” warning light on the 6

button goes off), prolonged use of

recirculated air may cause mist to

form on the side windows and wind-

screen as well as other problems

due to the presence of non-recircu-

lated air in the passenger compart-

ment. To avoid this, air recirculation

is disabled automatically after a cer-

tain time.

– isolating the vehicle from the exter-

nal atmosphere (driving in polluted

areas, etc.);

– to cool the passenger compartment

temperature more quickly when air

conditioning is activated.

3.9

MANUAL AIR CONDITIONING, HEATING SYSTEM (5/6)

Adjusting the air temperature

3

Turn control 5 to obtain the desired

temperature. The further towards the

red the slide is, the higher the tempera-

ture will be.

5

1

When the air conditioning system is

used for long periods, it may begin to

feel cold. To increase the temperature,

turn control 5 to the right.

Adjusting the ventilation

speed

Move the 3 control to adjust the amount

of air blown. If you want to shut off the

flow of air, set the 3 control to “0” (con-

trol A) or “OFF” (control B).

The system is deactivated: the ventila-

tion speed is zero (vehicle stationary).

You can, however, still feel a slight flow

of air when the vehicle is moving.

Using

W

position on the 1 con-

trol will disable the air recirculation

function in order to prevent misting

of the windscreen.

3.10

MANUAL AIR CONDITIONING, HEATING SYSTEM (6/6)

4

3

2

5

1

Rapid demisting

Rear screen de-icing/

demisting

Turn controls 1, 3 and 5 to:

With the engine running, press

button 2. The operating tell-tale comes

on.

– demisting

W

;

– the fan speed in position 3 or 4;

This function permits rapid demisting/

de-icing of the rear screen and de-icing

of the door mirrors (on equipped vehi-

cles).

– maximum temperature.

Press the 4 button to deactivate the air

recirculation (warning light off).

To exit this function, press button 2

again. Warning light goes out.

Demisting automatically stops.

3.11

AUTOMATIC CLIMATE CONTROL (1/4)

Adjusting the ventilation

speed.

2

3

1

4

5

6

In automatic mode, the system uses

the most suitable amount of air to reach

and maintain the desired comfort level.

You can still adjust the ventilation

speed by turning control 1 to increase

or reduce the ventilation speed.

Adjusting the air temperature

Turn control 3 to obtain the desired

temperature.

7

Automatic mode

8

Turning the control to the right in-

creases the temperature.

The controls

(depending on the vehicle)

The automatic climate control system

guarantees comfort in the passen-

ger compartment and good visibility

(except in the event of extreme condi-

tions), while optimising consumption.

The system controls the ventilation

speed, air distribution, air recirculation,

and starting and stopping the air condi-

tioning and air temperature.

1 Adjusting the ventilation fan speed.

2 “Clear View” function.

3 Adjusting the air temperature.

4 Automatic mode.

5 Air conditioning control.

6 Distribution of air in the passenger

AUTO: allows the selected comfort

level to be best attained, depending on

the exterior conditions. Press button 4.

compartment.

7 Air recirculation.

8 De-icing/demisting of the rear screen

and, depending on the vehicle, the

rear view mirrors.

Any action on a button other than

the AUTO button triggers deactiva-

tion of automatic mode.

3.12

AUTOMATIC CLIMATE CONTROL (2/4)

Clear View function

2

4

6

Press the 2 button: the integrated indi-

cator light comes on.

This function quickly demists and de-

ices the windscreen, the rear screen,

the front side windows, and the door

mirrors (depending on the vehicle). It

automatically activates the air condi-

tioning and rear screen de-icing func-

tions.

Press button 8 to stop the heated rear

screen operating, and the integrated in-

dicator goes out.

8

To exit this function, press button 2

or 4.

The air flow is directed towards

the dashboard air vents, the

front footwells and, depending on the

vehicle, the second row footwells.

Adjusting the distribution

of air in the passenger

compartment



Turn control 6. The integrated warning

light in the button comes on.

The air flow is mainly directed

to the dashboard air vents.





All the air is then directed to

the windscreen and front side

window demisting vents.

The air flow is directed mainly

towards the footwells.

W

The air flow is distributed be-

tween front side window de-

misting vents, the windscreen demist-

ing vents and the footwells.



3.13

AUTOMATIC CLIMATE CONTROL (3/4)

5

8

Rear screen de-icing/

demisting

Switching air conditioning on

or off

Press the 8 button: the integrated in-

dicator light comes on. This function

enables rapid demisting or de-icing of

the rear screen and de-icing of the rear

view mirrors (on equipped vehicles).

In automatic mode, the system switches

the air conditioning system on or off,

depending on the climate conditions.

Press the 5 button to deactivate the air

conditioning. The integrated indicator

light goes off.

To exit this function, press button 8

again. Demisting automatically stops.

3.14

AUTOMATIC CLIMATE CONTROL (4/4)

Stopping the system

1

4

Turn the control 1 to “OFF” to stop the

system. To start it, turn the control 1

again, then adjust the fan speed or

press the button 4.

7

Manual use

Air recirculation (isolation of

the passenger compartment)

This function is managed automatically

but you can also activate it manually. In

this case, the operation is confirmed by

a warning light on the button 7.

Press the 7 button: the integrated indi-

cator light comes on.

Prolonged use of this position may lead

to odours, caused by non-renewal of

air, and the formation of condensation

on the windows.

To avoid this, air recirculation is disa-

bled automatically after a certain time.

Fuel consumption increases when

the air conditioning is being used

(switch it off when it is not required).

Using the demisting/de-icing func-

tion will disable the air recirculation.

3.15

AIR CONDITIONING: information and operating instructions (1/2)

Advice on use

Fuel consumption

Operating faults

In some situations (air conditioning off,

air recirculation activated, ventilation

speed at zero or low etc.), you may

notice that condensation starts to form

on the windows and windscreen.

You will normally notice an increase in

fuel consumption (especially in town)

when the air conditioning is operating.

As a general rule, contact your ap-

proved dealer in the event of an oper-

ating fault.

For vehicles fitted with air conditioning

with no automatic mode, switch off the

system when it is not required.

– Reduction in de-icing, demisting

or air conditioning performance.

This may be caused by the passen-

ger compartment filter cartridge be-

coming clogged.

If there is condensation, use the “Clear

View” function to remove it, then use

the air conditioning in automatic mode

to stop it forming again.

Advice for reducing consumption

and helping to preserve the environ-

ment

– No cold air is being produced.

Check that the controls are set cor-

rectly and that the fuses are sound.

Otherwise, switch off the system.

Drive with the air vents open and the

windows closed. If the vehicle has been

parked in the sun, open the doors for a

few moments to let the hot air escape

before starting the engine.

Presence of water under the

vehicle

Maintenance

Refer to the Maintenance Document

for your vehicle for the inspection fre-

quency.

After prolonged use of the air condi-

tioning system, it is normal for water

to be present under the vehicle. This is

caused by condensation.

Do not add anything to the

vehicle’s ventilation circuit

(for example, to remove

bad odours).

Do not open the refriger-

ant fluid circuit. The fluid

may damage eyes or skin.

Use the air conditioning system reg-

ularly, even in cold weather, running

it at least once a month for approxi-

mately 5 minutes.

There is a risk of damage or of

fire.

3.16

AIR CONDITIONING: information and operating instructions (2/2)

Type of refrigerant fluid

Ñ

A

Type of oil in the air condi-

tioning circuit









Inflammable product

Consult the driver’s hand-

book

Maintenance

Quantity of refrigerant

fluid present in the ve-

hicle.

x.xxx kg

The refrigerant fluid circuit (of which

some components are hermetically

sealed) may contain fluorinated green-

house gases.

Global

Warming

GWP xxxxx

Potential (CO2 equi-

valent).

Do not open the refriger-

ant circuit. The fluid may

damage eyes or skin.

Depending on the vehicle, you will find

the following information on label A af-

fixed inside the engine compartment.

CO2 eq Quantity in weight and

x.xx t in CO2 equivalent.

The presence and location of the infor-

mation on label A depends on the ve-

hicle.

Before carrying out any

action in the engine com-

partment, you must switch

off the ignition. ➥ 2.4 or

➥ 2.6.

3.17

MULTIMEDIA EQUIPMENT (1/2)

1

5

A

B

C

1

4

2

3

The sockets USB can also be used to

recharge accessories with a maximum

power rating of 12 Watts (5 Volts) per

socket, which have been approved by

our Technical Department.

Multimedia systems A, B or

radio C

The location and operation of equip-

ment may vary according to the vehicle.

Multimedia sockets 2

You can use the USB sockets to access

the multimedia content of your acces-

sories and to update the system.

The various sources can be selected

using the multimedia screen or the

radio and the steering column controls.

1 Multimedia screen.

2 Multimedia sockets.

3 Steering column controls.

4 Steering wheel controls.

5 Radio.

The JACK socket enables the radio to

be used with an auxiliary cable.

Connect accessories with a

maximum power of 12 watts

only.

Fire hazard.

Please refer to the multimedia in-

structions for further information.

3.18

MULTIMEDIA EQUIPMENT (2/2)

8

4

6

9

7

Steering column controls 4

Microphone 8

Wireless charger 9

You can use the hands-free telephone 6

and voice recognition 7 controls on ve-

hicles fitted with these.

➥ 3.27

Using the telephone

We remind you of the need

to conform to the legislation

in force concerning the use

of such equipment.

3.19

ELECTRIC WINDOWS (1/3)

These systems operate with the igni-

tion on or off, until one of the front doors

is opened (limited to about 3 minutes).

1

6

5

2

Driver’s responsibility

Never leave your vehicle

with the card or key inside,

with a child, adult who is not

self-sufficient or a pet in the vehicle,

even for a short while.

3

4

One-touch electric windows

Briefly press or pull a window switch

as far as it will go: the window will be

raised or lowered fully. Pressing the

switch again stops the window moving.

Note: the rear windows do not open

fully

They may pose a risk to themselves

or to others by starting the engine

or activating equipment (such as the

gear lever or electric windows).

Avoid resting any objects against

a half-open window: there is a risk

that the electric window could be

damaged.

If any part of the body becomes

trapped, reverse the direction of the

window immediately by pressing the

relevant switch.

From the driver’s seat, use switch:

– 1 for the driver’s side;

– 2 for the front passenger’s side;

– 3 and 5 for the rear passengers.

From the passenger seats, use

switch 6.

Passenger safety

The driver can prevent op-

eration of the rear elec-

tric windows by pressing

Risk of serious injury.

switch 4. A confirmation message is

displayed on the instrument panel.

3.20

ELECTRIC WINDOWS (2/3)

Impossible to operate the one-touch

electric window

Remote control window

closing

The one-touch electric window is

equipped with heat protection: if you

press the switch for the window more

than sixteen consecutive times it goes

into protection mode (locking the

window).

When the doors are locked from the

outside, if you double press the lock-

ing button on the driver’s door in

hands-free mode, on the card or, de-

pending on the vehicle, on the key,

all of the windows equipped with a one-

touch electric window will close auto-

matically.

You can:

– use the electric window switch briefly

and with intervals of approximately

30 seconds;

– with the engine running, the window

will be unlocked after approximately

20 minutes of inaction on the electric

window switch.

It is recommended that the user only

operates the system when the vehi-

cle can be seen clearly and no one is

inside.

Note: if the window detects resistance

when closing (e.g. by a tree branch

etc.), it stops and then lowers again by

a few centimetres.

When closing the windows,

ensure that no part of the

body (arm, hand, etc.) is

protruding from the vehicle.

Risk of serious injury.

3.21

ELECTRIC WINDOWS (3/3)

Operating faults

In case of a fault when closing a

window, the system reverts to normal

mode: pull the switch concerned up as

often as necessary to fully close the

window (the window will close gradu-

ally), hold the switch (still on the clos-

ing side) for one second then lower and

raise the window fully to reinitialise the

system.

7

If necessary, contact your authorised

dealer.

Manual window winder

controls

Turn handle 7.

3.22

SUN VISOR

2

1

3

Front sun visor

Lower sun visor 1.

Courtesy mirrors

(depending on the vehicle)

Lift the cover 2. The light 3 switches on

automatically.

When driving, ensure the

courtesy mirror cover is

closed.

Risk of injury.

3.23

INTERIOR LIGHTING (1/3)

2

1

3

A

B

Courtesy light A

Press switch 1 for:

Courtesy light B

Press the 2 switch for the driver and

press 3 for the front passenger to

enable:

– permanent lighting;

– lighting controlled by the unlocking of

the vehicle or by opening one of the

doors. This switches off after a time

delay, once the doors concerned

have been closed correctly;

– permanent lighting;

– lighting controlled by the unlocking of

the vehicle or by opening one of the

doors. This switches off after a time

delay, once the doors concerned

have been closed correctly;

– lighting switches off immediately.

3.24

INTERIOR LIGHTING (2/3)

6

4

5

Note: on vehicles fitted with a multime-

dia screen, you can use the multime-

dia screen to deactivate/activate the

reading lights which switch on when

the doors or luggage compartment are

opened. ➥ 1.89.

Map reading light

(depending on the vehicle)

Press the 4, 5 or 6 switch to enable:

– permanent lighting;

– lighting switches off immediately.

3.25

INTERIOR LIGHTING (3/3)

7

8

Glove box light

Luggage compartment light

Depending on the vehicle, the 7 light

switches on when the cover is opened.

Light 8 comes on when the luggage

compartment is opened.

Unlocking and opening the doors or

tailgate switches on the timed cour-

tesy lights and lights.

3.26

PASSENGER COMPARTMENT STORAGE, FITTINGS (1/5)

2

3

1

Front door storage pockets 1

It can hold a 1.5 litre bottle.

Open storage compartment 2

Dashboard storage

compartment 3

Open and move the flap to access the

storage compartment

Nothing should be placed

on the floor area in front of

the driver as such objects

may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

Ensure that no hard, heavy

or pointed objects are

placed in the “open” storage

compartments in such a

way that they may fall onto passen-

gers during sudden turning, braking

or in the event of an accident.

3.27

PASSENGER COMPARTMENT STORAGE, FITTINGS (2/5)

4

5

Sun blind storage

compartment 4

This can be used for storing motorway

tickets, cards, etc.

Centre console storage

compartment/induction

charging zone 5

For more information on the induction

charging zone, please refer to the mul-

timedia instructions.

Ensure that no hard, heavy

or pointed objects are

placed in the “open” storage

compartments in such a

way that they may fall onto passen-

gers during sudden turning, braking

or in the event of an accident.

3.28

PASSENGER COMPARTMENT STORAGE, FITTINGS (3/5)

6

7

Centre armrest storage

compartment 7

Lift the central armrest cover 6.

3.29

PASSENGER COMPARTMENT STORAGE, FITTINGS (4/5)

8

11

10

9

Cup holders 9

Slide 8 to access the cup holder.

Cup holders 10

This can be used to store a mobile ash-

tray, drink cans, etc.

Passenger storage

compartment

Pull handle 11 to open it.

The cup holder is equipped with retain-

ing hooks to keep the cup in place.

The glove box can hold A4-sized docu-

ments, a bottle etc.

When turning corners,

accelerating or braking,

ensure that the recepta-

cle being held by the cup

holder is not dislodged.

Ensure that no hard, heavy

or pointed objects are

placed in the “open” storage

compartments in such a

There is a risk of injury if hot

liquid escapes.

way that they may fall onto passen-

gers during sudden turning, braking

or in the event of an accident.

3.30

PASSENGER COMPARTMENT STORAGE, FITTINGS (5/5)

14

13

12

Rear door storage

Rear seat storage pockets 13

Grab handle 14

compartment 12

This offers support and can be held

when the vehicle is moving.

Do not use it for getting into or out of

the vehicle.

Ensure that no hard, heavy

or pointed objects are

placed in the “open” storage

compartments in such a

way that they may fall onto passen-

gers during sudden turning, braking

or in the event of an accident.

3.31

ACCESSORIES SOCKET

1

Accessories socket 1

You can use the 1 socket. It is pro-

vided for the purpose of connecting ac-

cessories approved by our Technical

Department.

Connect accessories with

maximum power of

a

120 watts (12 V) only.

When several accessory

sockets are used at the same time,

the total power of the connected

accessories must not exceed

180 watts.

Fire hazard.

3.32

REAR HEAD RESTS

2

1

When the headrest is set at the

lowest position, this is for storage

only. It should not be in this position

when a seat is occupied.

Position for use

Raise the headrest as far as possible to

use it in the high position. Check that it

is correctly locked.

To refit the headrest

Fit the rods into their housing and push

down the headrest until it locks to set

it to raised position. Check that the

bonnet is correctly locked.

To remove the headrest

Raise the headrest as far as it will go,

then press button 1 and remove the

headrest.

Folding positions 2 for the

headrest

Press the button 1 and lower the head-

The headrest is a safety

component; check that it is

fitted and in the correct po-

sition. The top of the head-

rest should be as close as possible

to the top of the head.

rest completely.

3.33

REAR BENCH SEAT: functions

To replace the seatback, proceed in

the reverse order to removal.

Refit the seatback and click it back into

place.

B

When refitting the seat-

back, make sure it is cor-

rectly locked in place.

If seat covers are fitted,

make sure these do not prevent the

seatback latch from locking in.

Make sure that the seat belts are

positioned correctly.

A

1

Reposition the headrests.

To fold down the seatback

Ensure that the front seats are far

enough forward.

Lower the headrests fully.

Place the seat belts in their guides A.

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

Press button 1 and lower the seat-

back B.

When moving the rear

seats, ensure that nothing

obstructs the anchorage

points (passenger’s arm or

leg, a pet, gravel, cloth, toys, etc.).

Before moving the seatback, put

the seat belt in belt guide A to avoid

damaging it.

3.34

BOOT

2

3

1

To open

Press the 1 button to open the luggage

Opening the doors manually

from the inside

compartment lid a few centimetres.

If it is impossible to unlock the tailgate,

it can be done manually from inside:

Lift the luggage compartment lid.

– access the luggage compartment by

tilting the rear bench seatback(s),

To close

Lower the boot lid using the handle

inside the boot 2 to assist you.

– insert a pencil or similar object in

recess 3 and slide the unit as shown

in the illustration;

The attaching of any carry-

ing device (bike rack, lug-

gage box etc.) resting on

the luggage compartment

lid is prohibited. To install a carrying

device on your vehicle, contact an

Approved Dealer.

– push the tailgate to open it.

3.35

REAR PARCEL SHELF

3

1

A

2

Removal

Utility version

– Unhook the two straps 1 of the door

Unclip mountings 3 on either side of the

parcel shelf, then remove it via the boot.

of the boot;

– lift the shelf 2 to unclip it (move-

ment A);

To refit it, proceed in the reverse order

to removal.

– pull the shelf towards you.

To refit, proceed in the reverse order to

removal.

Do not place any heavy or

hard object on the parcel

shelf. These may pose a

risk to the vehicle occu-

pants if the driver has to brake sud-

denly or if the vehicle is involved in

an accident.

3.36

BOOT ARRANGEMENTS

1

2

3

Intermediate position

Storage position

Mobile floor 1

In the blocked position, it allows you to

access the tools stored under the boot

carpet.

This allows for more space to store

things in the boot.

Flat position

Enables you to flatten the floor by fold-

ing down the back of the rear bench

seat and to compartmentalise the boot

into two distinct spaces.

– Remove the mobile floor 1;

– place it in the luggage compartment

under the runner 2.

– place it in the luggage compartment,

sliding it behind the runner 2.

The mobile floor is positioned on the

runner 2.

Bag hooks 3

Maximum weight per hook: 5 kg

Maximum weight for the mobile

floor: 100 kg evenly distributed.

3.37

TRANSPORTING OBJECTS IN THE LUGGAGE COMPARTMENT

Always position the objects transported

so that the largest surface is against:

– the rear bench seatback, for normal

A

B

loading (example A);

1

– the front seatbacks with the rear seat-

backs folded down, as is the case for

maximum loads (example B).

Always position the heavi-

est items directly on the

floor. Use the lashing

If you have to place objects on the folded

seatback, it is necessary that you lower

the headrests before folding the seat-

back so that it can be folded as flat as

possible against the seat.

points 1 on the boot floor, if

these are fitted to the vehicle. The

luggage should be loaded in such a

way that no items will be thrown for-

ward and strike the occupants if the

driver has to brake suddenly. Fasten

the rear seat belts, even if the seats

are not occupied.

3.38

TRANSPORTING OBJECTS towbar

A

Permissible nose weight, maxi- -

mum permissible towing weight

braked and unbraked: ➥ 6.9.

Choice and fitting of towing

equipment

Maximum weight of towing equip-

ment:

– 10 kg on a vehicle with towing

pre-equipment;

Maximum dimension A: 762 mm.

– 28 kg on a vehicle without towing

pre-equipment.

It is not permitted to fit a mechanical

towing device (ball, hook, etc.) that

is removable without tools or retract-

able if it cannot be easily removed

or repositioned when not in use.

Any towing device must not ob-

struct any lighting component or

the number plate when not in use.

Mechanical towing devices (ball,

hook, etc.) which can be removed

without tools or which are retract-

able must be removed or reposi-

tioned when they are not in use.

For fitting and conditions of use,

refer to the equipment’s fitting in-

structions.

Please keep these instructions with

the rest of the vehicle documenta-

tion.

In all cases, you must comply with

the regulations of the particular

country you are in.

3.39

ROOF BARS, SPOILER

1

Precautions during use

Handling the tailgate

A

Before handling the tailgate, check the

objects and/or accessories (bike rack,

roof box, etc.) fitted to the roof bars:

these must be correctly positioned and

secured, so as not to hinder the opera-

tion of the tailgate.

Accessing the mounting

points

Spoiler A

Open the doors to access the mount-

ing points 1.

For information on the range of

equipment adapted to your vehi-

cle, we advise you to consult an ap-

proved Dealer.

Refer to the manufacturer’s instruc-

tions for information on how to fit

and use the roof rack bar.

The attaching of any carry-

ing device (bike rack, lug-

gage box etc.) resting on

If original roof bars, ap-

proved by our Technical

Department, are supplied

with screws, only use these

screws for attaching the roof bars to

the vehicle.

Please keep these instructions with

the rest of the vehicle documenta-

tion.

the spoiler is prohibited. To

install a carrying device on your ve-

hicle, contact an Approved Dealer.

Maximum permissible load on

roof rack ➥ 6.9.

3.40

Your Comfort for Your Renault Clio 4 Door Fifth Generation (2019-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals