ENGINE OIL LEVEL
It is normal for an engine to use oil
for lubrication and cooling of
moving parts and it is normal to top
up the level between oil changes.
The squares which appear on the
display indicate the level. They
disappear as the level drops and are
replaced by dashes: example
message 2.
Message 1
Level
satisfactory
2
However, contact your RENAULT
Dealer if more than 0.5 litres is
being consumed every 600 miles
(1000 km) after the running in
period.
To advance to trip computer
reading, press the button again.
- if the level is at minimum: the Top
up oil level message appears on
the display, the squares are
replaced by dashes (message 3)
Message 2
Level
display
function
2
Oil change frequency: check the oil
level from time to time and always
before long journeys, to avoid the
risk of damaging your engine.
and the warning light on
the
Message 3
Minimum
level
2
instrument panel comes on.
Top up as soon as possible.
Reading the oil level
Reading the level on the instrument
panel
When the ignition has been
switched on for approximately 30
seconds:
The vehicle must be parked on level
ground and the engine should have
been switched off for some time
beforehand to obtain an accurate
reading.
- if the level is correct, the display
The oil level can be read:
- on the instrument panel;
- on the dipstick.
indicates
message 1.
“Oil
level
OK”:
Special note: if you wish to obtain
a more precise indication of the oil
level, press the trip mileage reset
button or the information scroll
button on the trip computer.
4.04
English 
