levelS (2/3)
level 1
topping up
It is normal for the level to drop as
the linings become worn, but it should
never drop below the Min line.
After any operation on the hydraulic cir-
cuit, a specialist must replace the fluid.
Only use fluids approved by our
Technical Department (and taken from
a sealed container).
1
If you wish to check the disc and drum
wear yourself, you should obtain the
document explaining the checking pro-
cedure from our network or from the
manufacturer’s website.
Replacement intervals
Refer to the Maintenance Service
Booklet for your vehicle.
Brake fluid level
The level should be read with the engine
switched off and on level ground. This
should be checked frequently, and any
time you notice even the slightest loss
in braking efficiency.
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Consult your approved dealer at
once if you notice an abnormal or
repeated drop in any of the fluid
levels.
Risk of injury.
4.8
English 
