REAR SEAT OPERATION: 5-seat version
To remove a seat
Lower the headrest.
Unfasten the seat belt buckle(s)
from the seat.
Fold down the seatback.
Move the seat backwards as far as
it will go.
2
Move handle 1 and lift the seat
until it locks in the vertical
position.
1
4
3
Note: if the seat does not lift, move
it forwards a position then move
handle 1 again to lift the seat.
Unlock the catches 3 and 4.
Returning a seat to its normal
position
Operate control 2 under the seat to
unlock the seat from the vertical
position, lower it to approximately
ten centimetres from the floor and
let it go.
Hold the seat then lift the seat
upwards, using the door handle
Folding up a seat
Lower the headrest.
located
behind
the
seat
Put the seat in table position.
(depending on the vehicle).
Move the seat backwards as far as
it will go.
Move handle 1 and lift the seat at
the front until it locks in the
vertical position.
The seat positions itself under its
own weight.
When moving the rear
seats, check that the
anchorage points are
clean (they must be free
from grit, cloths, toys, etc.).
Note: if the seat does not lift, move
it forwards a position then move
handle 1 again to lift the seat.
3.37
English 
