REAR SEAT FUNCTIONS (2/2)
When fitting side seats, make sure
that the seat belt buckle is inside the
vehicle.
B
8
When driving with the seats
folded down: ensure you
6
check that the seats are
moved fully forward before
7
folding them down and place the
load as close as possible to prevent
the seats from falling back when ac-
celerating or during sudden braking.
6
9
To remove a seat
To fit a seat
Attach the hooks 8 to rail 7 marked 9 by
gently lifting the back of the seat.
Tilt the seat as far forwards as possible,
movement B (the handle 6 locks ac-
companied by a locking noise).
With the seat folded down, gently lower
it while lifting handle 6.
Release the handle and guide the seat
to the floor.
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
Remove the seat from the vehicle by lif-
ting it.
Note: it may be necessary to move
the passenger and/or driver’s seats
forwards and to lower the seatback in
order to tilt the seat as far forwards as
possible.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Lower the seat until it locks in place at
floor level.
Check that it is correctly locked.
Once the rear seats have been re-
moved, ensure that they are rested
on a flat surface so as not to damage
the units under the seats (depen-
ding on the vehicle).
Reposition the headrests.
3.29
English 
