Get Your comfort Guide for Renault Symbioz 4 Door First Generation (2024-2026)

MULTI-SENSE

You can access MULTI-SENSE, de-

pending on the vehicle:

– from the multimedia screen 1 ;

– using switch 2 .

Please refer to the multimedia in-

structions for further information.

Accessing the menu

Depending on the vehicle, the MUL-

TI-SENSE system enables you to

choose from several driving modes

that affect the driving, ambient

lighting, comfort and driving posi-

tion:

– all the modes are preconfigured

and can be customised (ambient

lighting, etc.);

The selected mode is displayed on

the instrument panel 3 .

4

– the "Perso" mode is customisable.

After the engine stops,

the vehicle will always

restart in Comfort mode.

The driving modes influence:

– steering force;

– the Electronic Stability Program;

– engine responsiveness.

They also influence:

"Perso" mode

This mode allows the complete con-

figuration of the driving elements, in-

cluding engine responsiveness.

– the lighting in the passenger com-

partment and on the instrument

panel;

– the presentation of the instrument

panel and the multimedia screen;

– depending on the vehicle, the dri-

ving position.

You can reset the settings

for the "Perso" mode.

Please refer to the multi-

media instructions for more in-

formation.

Engine settings are spe-

cific to each of the driving

modes and cannot be

customised except for the "Per-

so" mode.

"Eco" mode

The Eco mode focuses on energy

saving. The steering is smooth and

the engine and gearbox manage-

Y o u r c o m f o r t - 2 9 7

MULTI-SENSE

ment enable the reduction of fuel

consumption ꢀ 168.

(on soft ground, deep snow, mud,

sand, etc.).

"Sport" mode

This mode enables an increased re-

sponsiveness from the engine and

the gearbox. The steering is firmer.

In "All-Terrain" and

"SNOW" mode, certain

driving assistance func-

tions (adaptive cruise control,

Stop and Go, Active driver as-

sist, etc.) are not available or are

automatically deactivated

when switching to one of these

two modes.

"Comfort" mode

4

Using standard vehicle settings, this

mode gives you the best compro-

mise between comfort and dy-

namism.

"All-Terrain" mode

(depending on the vehicle)

This mode enables optimal usage on

soft ground (mud, sand, dead leaves,

etc.).

"SNOW" mode

(depending on the vehicle)

This mode allows you to optimise

your vehicle's electronic stability

control on slippery roads (snow, ice,

etc.).

Use this mode on paved and slippery

roads.

Note: the use of "SNOW" mode is not

suitable in certain driving situations

2 9 8 - Y o u r c o m f o r t

AIR VENTS, HEATING AND AIR CONDITIONING

Air vents, air outlets

4

Y o u r c o m f o r t - 2 9 9

AIR VENTS, HEATING AND AIR CONDITIONING

Rear seats

1. Side air vents

2. Side window demister outlet

3. Windscreen demister outlet

4. Centre air vents

5. Footwell heater outlets for front

passengers

6. Control panel

4

7. Footwell heater outlets for rear

passengers

8. Rear passenger central air vents.

Central 4, side 1 and rear 8 air

vents

Air flow

To close: move the tab 9 towards

the outside of the vehicle, beyond

the point of resistance.

(depending on the vehicle)

Passenger footwell heater outlets 7 .

To open: move the tab 9 towards the

inside of the vehicle.

Direction

Move the cursor 9 to the desired po-

sition.

Do not add anything to

the vehicle’s ventila-

tion circuit (for exam-

ple, to remove bad

odours).

There is a risk of damage or of

fire.

Do not attach any objects

to the air vents (e.g. tele-

phone mounting).

Risk of damage.

3 0 0 - Y o u r c o m f o r t

AIR VENTS, HEATING AND AIR CONDITIONING

8. Passenger compartment air dis-

Stopping the system

Automatic climate control

The controls

tribution indicator.

Press control 17 "OFF".

9. System OFF stop indicator light.

10. System OFF stop control.

Switching the air conditioning on

or off

11. Passenger compartment air dis-

tribution adjustment.

In automatic mode, the system man-

ages activation of the air condition-

ing. You will still be able to activate

or deactivate the system by press-

ing the control 5 .

12. Activation control for the "A/C

MAX" function.

4

13. Air recirculation.

14. Air-conditioning activation con-

trol in AUTO mode.

Automatic mode

The automatic climate control sys-

tem guarantees comfort in the pas-

senger compartment and good visi-

bility (except in the event of extreme

conditions), while optimising fuel

consumption.

The system controls the ventilation

speed, air distribution, air recircula-

tion, and starting and stopping the

air conditioning and air tempera-

ture.

This mode consists of a choice of

three programmes:

AUTO: optimises the selected com-

fort level according to exterior con-

ditions. Press the button 14 .

15. De-icing/demisting of the rear

screen and, depending on the vehi-

cle, the rear view mirrors.

16. "Clear View" function.

17. Adjusting the ventilation speed

and stopping the system.

1. Heating temperature indicator.

2. Ventilation speed indicator.

18. Adjusting the air temperature.

3. Driver's heated seat activation

control.

Operation

4. Heated steering wheel activation

control.

Activating the system

When the vehicle is started, the sys-

tem returns to the last programme

used.

The system is also functional when

parked.

Press the control 14 to activate the

system or set the control 17 to the

desired ventilation speed.

5. Air-conditioning activation con-

trol.

6. Heated windscreen activation

control.

SOFT: enables the desired tempera-

ture level to be obtained more

smoothly and silently. Press button

7. Passenger's heated seat activa-

tion control.

Y o u r c o m f o r t - 3 0 1

AIR VENTS, HEATING AND AIR CONDITIONING

14 then press downwards again to

activate SOFT mode.

vents, the windscreen demisting

vents and the footwells.

control 17 to increase or reduce the

ventilation speed.

FAST: increases the air flow in the

passenger compartment. This mode

is recommended in particular to op-

timise comfort in the rear seats.

Press button 14 then press upwards

again to activate FAST mode.

When the air conditioning starts in

automatic mode, the system returns

to the last programme used.

"Clear View" function

The air flow is distributed be-

tween the front side window demist-

ing vents, the windscreen demisting

vents, the dashboard air vents and

the footwells.

Press the button 16 and the built-in

warning light comes on.

This function quickly de-mists the

windscreen, rear screen, front side

windows and door mirrors (depend-

ing on the vehicle). It automatically

activates the air conditioning and

rear screen de-icing functions.

4

The air flow is mainly directed

to the dashboard air vents.

The air flow is directed to-

wards the dashboard vents and to-

wards the footwells.

To exit this function, press button 14

or 16 .

Any action on a button

other than the AUTO but-

ton deactivates automat-

ic mode.

Rear screen de-icing and demist-

ing

The air flow is directed mainly

towards the footwells.

Press the button 15 and the built-in

warning light comes on. This func-

tion enables rapid demisting or de-

icing of the rear screen and de-icing

of the rear view mirrors (on equipped

vehicles).

To exit this function, press button 15

again. Demisting automatically

stops.

Adjusting the distribution of air in

the passenger compartment

Adjusting the air temperature

Press or raise control 18 to adjust the

temperature displayed on the indi-

cator light 1 .

Press 11 one or more times to select

the air distribution. The air distribu-

tion selected 8 is displayed on the

multimedia screen. The positions are

in the following order:

Adjusting the ventilation fan

speed

In automatic mode, the system uses

the most suitable amount of air to

reach and maintain the desired

comfort level.

You will still be able to adjust the

ventilation speed by pressing the

All the air is then directed to

the windscreen and front side win-

dow demisting vents.

"A/C MAX" function

The "A/C MAX" function enables the

user to feel the maximum power of

their air conditioning system without

any constraint or compromise relat-

ed to the acoustics and the feeling

The air flow is distributed be-

tween front side window demisting

3 0 2 - Y o u r c o m f o r t

AIR VENTS, HEATING AND AIR CONDITIONING

of the air being too cold on the

hands and face.

This function involves automatic

modifications:

Prolonged use of this position may

lead to odours, caused by non-re-

newal of air, and the formation of

condensation on the windows.

We therefore advise you to return to

automatic mode as soon as air recir-

culation is no longer needed, by

pressing button 13 .

– temperature programmed to fully

cold;

– distribution of air to the occu-

pants;

– air flow at its maximum power;

– activation of the air conditioning;

– air recirculation.

4

ECO mode

Press the button 12 to activate the

function. Deactivate ECO mode for

best performance.

From the MULTI-SENSE menu, ac-

cessible from the multimedia screen

20 or by pressing the switch 19 , you

can activate ECO mode, which af-

fects the heating level and reduces

the vehicle's fuel consumption.

An ECO warning light located under

the temperature display on the mul-

timedia screen 20 informs you that

ECO mode is activated.

Air recirculation (isolation of the

passenger compartment)

This function is managed automati-

cally, but you can also activate it

manually. In this case the operation

is confirmed by a warning light built

into the button 13 .

Demisting/de-icing will

still take priority over the

air recirculation.

Manual use

Press the button 13 and the built-in

warning light comes on.

Y o u r c o m f o r t - 3 0 3

AIR VENTS, HEATING AND AIR CONDITIONING

For vehicles fitted with air condition-

ing with no automatic mode, switch

off the system when it is not re-

quired.

"Favourites" function

Air conditioning: information

and advice on use

Information and advice on use

Advice for reducing consumption

and helping to preserve the environ-

ment

Drive with the air vents open and the

windows closed. If the vehicle has

been parked in the sun, open the

doors for a few moments to let the

hot air escape before starting the

engine.

Advice on use

In some situations (air conditioning

off, air recirculation activated, venti-

lation speed at zero or low etc.), you

may notice that condensation starts

to form on the windows and wind-

screen.

If there is condensation, use the

"Clear View" function to remove it,

then use the air conditioning in auto-

matic mode to stop it forming again.

4

Maintenance

Refer to the maintenance document

for your vehicle for the inspection

frequency.

Depending on the vehicle, by press-

ing the steering wheel control 21 you

can activate the following functions

according to the stored user set-

tings that you have previously de-

fined:

– heated steering wheel;

– heated seats;

– heated rear screen;

– heated rear view mirrors.

Do not add anything to

the vehicle’s ventila-

tion circuit (for exam-

ple, to remove bad

odours).

Use the air conditioning

system regularly, even in

cold weather, running it at

least once a month for approxi-

mately 5 minutes.

There is a risk of damage or of

fire.

For more information on program-

ming this function, please refer to

the multimedia instructions.

Operating faults

Fuel consumption

As a general rule, contact your ap-

proved dealer in the event of an op-

erating fault.

You will normally notice an increase

in fuel consumption (especially

when driving in town) when the air

conditioning is operating.

–

Reduction in de-icing, demisting

or air conditioning performance.

3 0 4 - Y o u r c o m f o r t

AIR VENTS, HEATING AND AIR CONDITIONING

This may be caused by the cabin fil-

ter cartridge becoming clogged.

Refrigerant fluid

Inflammable product

–

No cold air is being produced.

Consult the vehicle user man-

Check that the controls are set cor-

rectly and that the fuses are sound.

Otherwise, switch off the system.

ual

Maintenance

Special cases of hybrid versions

The vehicle's air conditioning sys-

tem is used to cool the traction bat-

tery.

A prolonged drop in air conditioning

efficiency may lead to premature

deterioration of the traction battery.

(1) Quantity of re-

4

frigerant fluid

x.xxx kg

present in the ve-

hicle.

(2) Global Warm-

ing Potential (CO2

equivalent).

GWP xxxxx

Presence of water under the ve-

hicle

(3) Quantity in

weight and in CO2

equivalent.

CO2 eq x.xxxt

The refrigerant fluid circuit (of which

some components are hermetically

sealed) may contain fluorinated

greenhouse gases.

Depending on the vehicle, you will

find the following information on la-

bel A affixed inside the engine com-

partment.

After prolonged use of the air condi-

tioning system, it is normal for water

to be present under the vehicle. This

is caused by condensation.

Additional information

Depending on label and depending

on the type of refrigerant:

Refrigerant fluid R-1234yf

– (1) 0.420 kg (0.93 lbs) or, on E-Tech

Full Hybrid versions, 0.520 kg (1.1 lbs)

– (2) GWP 0.501

– (3) 0.0002t or, for E-Tech Full hy-

brid versions, 0.0003t

Do not open the refrig-

erant circuit. The fluid

may damage eyes or

skin.

The presence and location of the in-

formation on label A depends on the

vehicle.

Type of refrigerant fluid

Type of oil in the air condition-

ing circuit

Y o u r c o m f o r t - 3 0 5

AIR VENTS, HEATING AND AIR CONDITIONING

Do not open the refrig-

erant circuit. The fluid

may damage eyes or

skin.

Before carrying out any

action in the engine

compartment, you

4

must switch off the ig-

nition ꢀ 141.

3 0 6 - Y o u r c o m f o r t

MULTIMEDIA EQUIPMENT

Multimedia settings

The location and operation of equip-

ment may vary according to the ve-

hicle.

Steering wheel controls 4

1. Multimedia screen;

2. Multimedia sockets;

3. Steering column controls;

4. Steering column controls;

5. USB-C multimedia ports for the

rear passengers.

4

Please refer to the multi-

media instructions for fur-

ther information.

On those vehicles equipped, you can

use the hands-free telephone con-

trol 6 and voice recognition control

7 .

"USB-C" multimedia socket 2

and 5

The USB-C multimedia sockets 2

and 5 can be used to charge acces-

sories with a maximum power of 15

Watts (5 Volts) per socket.

Note: the USB-C 2 multimedia ports

also allow for data transfer.

Connect accessories

with a maximum power

of 12 watts only.

Fire hazard.

Y o u r c o m f o r t - 3 0 7

MULTIMEDIA EQUIPMENT

Microphone 8

4

Using the telephone

We remind you of the

need to conform to the

legislation in force con-

cerning the use of such equip-

ment.

Wireless charger 9

(depending on the vehicle)

ꢀ 315

3 0 8 - Y o u r c o m f o r t

PASSENGER COMPARTMENT EQUIPMENT

One-touch electric windows

Electric windows

These systems operate with the igni-

tion on or off, until one of the front

doors is opened (limited to about 3

minutes).

Driver's responsibility

Never leave your vehi-

cle with the card inside,

4

with a child, a depen-

dent adult or a pet, even for a

short while.

They may pose a risk to them-

selves or to others by starting

the engine or activating equip-

ment (such as the gear lever or

electric windows).

If any part of the body becomes

trapped, reverse the direction

of the window immediately by

pressing the relevant switch.

Risk of serious injury.

Note: if the window detects resis-

tance when almost fully closed (e.g.

a tree branch), it stops and then low-

ers again by a few centimetres.

Briefly press or pull a window switch

as far as it will go: the window will be

fully raised or lowered. Pressing the

switch again stops the window mov-

ing.

Note: the rear windows do not open

fully.

Avoid resting any objects

against a half-open win-

dow: there is a risk that

the electric window could be

damaged.

From the driver's seat, use switch:

1. for the driver's side;

2. for the front passenger's side;

3 and 5 for the rear passengers.

From the passenger seats, press the

switch 6 .

Y o u r c o m f o r t - 3 0 9

PASSENGER COMPARTMENT EQUIPMENT

two seconds on the locking button

Opaque panoramic roof

The panoramic roof made of opaque

glass is divided into two sections

(front and rear).

It can become totally opaque or

completely transparent. You can al-

so make only one area opaque (front

or rear).

Each transition or transition request

is accompanied by an animation

representing the roof.

for the driver's door in hands-free

mode, on the card, all of the win-

dows equipped with a one-touch

electric window close automatically.

Passenger safety

The driver can prevent

the front and rear pas-

senger electric win-

It is recommended that the user only

operates the system when the vehi-

cle can be seen clearly and no one is

inside.

dows from operating (and the

driver’s window) by pressing

switch 4 . A confirmation mes-

sage is displayed on the instru-

ment panel.

4

When closing the win-

dows, ensure that no

part of the body (arm,

hand, etc.) is protruding

from the vehicle.

Impossible to operate the one-

touch electric window

Operation

The one-touch electric window is

equipped with heat protection: if you

press the switch for the window

more than 16 consecutive times it

goes into protection mode (locking

the window).

Risk of serious injury.

Operating faults

In case of a fault when closing a win-

dow, the system reverts to normal

mode: pull the switch concerned up

as often as necessary to fully close

the window (the window will close

gradually), hold the switch (still on

the closure side) for one second then

lower and raise the window fully to

reinitialise the system.

You can:

– use the electric window switch

briefly and with intervals of approxi-

mately 30 seconds;

– with the engine running, the win-

dow will be unlocked after approxi-

mately 20 minutes of inaction on the

electric window switch.

To make the entire roof opaque or

transparent, press and hold switch 1 .

To change one of the sections (front

or rear) to opaque or transparent

If necessary, contact an approved

Dealer.

Remote control window closing

When the doors are locked from the

outside, if you press for more than

3 1 0 - Y o u r c o m f o r t

PASSENGER COMPARTMENT EQUIPMENT

mode, press briefly on switch 1 as

many as times as required.

operation (reduced movement) or

may not work at all.

Note: before pressing switch 1

again, you must wait for the previ-

ously selected action to be complet-

ed.

Depending on the vehicle, it is also

possible to operate the vehicle by

voice command. Please refer to the

multimedia instructions for more in-

formation.

Interior lighting

Courtesy and reading lights

Reading lights A , B or C

4

The roof becomes com-

pletely opaque several

minutes after the engine

has stopped, or when the doors

are locked.

When the driver's door is

opened, the roof resumes

the status that was se-

lected the last time the engine

was stopped or the doors were

locked.

Limits of operation

To enable permanent lighting, press:

– switch 1 for the driver;

– switch 2 for the front passenger;

In very cold weather conditions, the

panoramic roof may have limited

Y o u r c o m f o r t - 3 1 1

PASSENGER COMPARTMENT EQUIPMENT

– switch 3 , 4 or, depending on the

vehicle, switch 5 for the rear passen-

gers.

To activate permanent lighting,

press switch 2 for the driver or

switch 3 for the front passenger.

of the doors. This switches off after a

Luggage compartment light

time delay, once the relevant doors

have been closed correctly;

– lighting switches off immediately.

Glove box light

Note: on vehicles fitted with a multi-

media screen, you can use the multi-

media screen to deactivate/acti-

vate the reading lights which switch

on when the doors or luggage com-

partment are opened ꢀ 112.

4

Courtesy light D

The light 5 comes on when the lug-

gage compartment is opened.

Unlocking and opening

the doors or tailgate

switches on the timed

The light 4 comes on when the cover

is opened.

courtesy lights and lights.

Press the switch 6 to enable:

– permanent lighting;

– lighting controlled by the unlock-

ing of the vehicle or by opening one

3 1 2 - Y o u r c o m f o r t

PASSENGER COMPARTMENT EQUIPMENT

Sun visor, mirror

Accessories socket

Front sun visor

4

Lift the cover 2 . The lighting 3 is au-

tomatic.

Lower the sun visor 1 .

When driving, ensure

the courtesy mirror

cover is closed.

Courtesy mirrors

(depending on the vehicle)

Risk of injury.

You can use sockets 1 and 2 .

Y o u r c o m f o r t - 3 1 3

PASSENGER COMPARTMENT EQUIPMENT

Connect accessories

with a maximum power

of 120 watts (12 V) only.

When several accesso-

ry sockets are used at the same

time, the total power of the con-

nected accessories must not

exceed 180 watts.

4

Fire hazard.

3 1 4 - Y o u r c o m f o r t

PASSENGER COMPARTMENT STORAGE, FITTINGS

Sun blind storage compart-

ment 2

Centre console storage com-

partment3 /induction charg-

ing zone 4

Storage compartments of the

front doors 1

4

This can be used for storing motor-

way tickets, cards, etc.

They can hold a 1.5-litre bottle.

For more information on the induc-

tion charging zone, please refer to

the multimedia instructions.

Nothing should be

placed on the floor

(area in front of the dri-

ver) as these objects

may slide under the pedals dur-

ing sudden braking manoeu-

vres, thus obstructing their use.

Y o u r c o m f o r t - 3 1 5

PASSENGER COMPARTMENT STORAGE, FITTINGS

Passenger storage compart-

ment

Ensure that no hard,

heavy or pointed ob-

jects are placed in the

"open" storage com-

partments in such a way that

they may be projected onto

passengers during sudden turn-

ing, braking or in the event of an

accident.

4

Centre console storage com-

partments 5 and 6

Ensure that no hard,

heavy or pointed ob-

jects are placed in the

"open" storage com-

Pull handle 7 to open it.

The storage compartment can hold

A4-sized documents, a bottle etc.

partments in such a way that

they may be projected onto

passengers during sudden turn-

ing, braking or in the event of an

accident.

3 1 6 - Y o u r c o m f o r t

PASSENGER COMPARTMENT STORAGE, FITTINGS

Lift the cover 8 of the sliding armrest

Centre armrest storage com-

partment 10

by pressing button 9 .

When turning corners,

accelerating or brak-

Cup holders 11

ing, ensure that the re-

ceptacle being held by

the cup holder is not dislodged.

There is a risk of injury if hot liq-

uid escapes.

4

Storage compartments of the

rear doors 12

Depending on the vehicle, the cup

holder may be equipped with retain-

ing hooks to keep the cup in place.

This can be used to store a mobile

ashtray, drink cans, etc.

They can hold a 0.5-litre bottle.

Y o u r c o m f o r t - 3 1 7

PASSENGER COMPARTMENT STORAGE, FITTINGS

Rear seat storage pockets 13

4

Ensure that no hard,

heavy or pointed ob-

jects are placed in the

"open" storage com-

partments in such a way that

they may be projected onto

passengers during sudden turn-

ing, braking or in the event of an

accident.

3 1 8 - Y o u r c o m f o r t

TRANSPORTING OBJECTS

Mobile floor

Flat position

Luggage compartment stor-

age

Rear parcel shelf

Removal

4

– Unhook the two cords 1 from the

luggage compartment;

– lift the shelf 2 to unclip it (move-

ment A );

Enables you to flatten the floor by

folding down the back of the rear

bench seat and to compartmen-

talise the boot into two distinct

spaces.

– pull the shelf towards you.

To refit, proceed in the reverse order

to removal.

The mobile floor 1 is positioned on

the runner 2 .

Do not place any heavy

or hard object on the

parcel shelf. These may

pose a risk to the vehi-

Maximum weight for the

mobile floor: 100 kg evenly

distributed.

cle occupants if the driver has

to brake suddenly or if the vehi-

cle is involved in an accident.

Y o u r c o m f o r t - 3 1 9

TRANSPORTING OBJECTS

– place the mobile floor 1 in the lug-

gage compartment, underneath the

runner 2 .

Intermediate position

Transporting objects in the lug-

gage compartment

Always position the objects trans-

ported so that the largest surface is

against:

4

– the front seatbacks with the rear

seatbacks folded down, as is the

case for maximum loads (example

B ).

Ensure that the objects being trans-

ported are evenly distributed

throughout the loading area.

In the blocked position, it allows you

to access the tools stored under the

boot carpet.

– Remove the mobile floor 1 ;

– place it in the luggage compart-

ment using the runners provided 2 .

If you have to place objects on the

folded seat back, it is vital that you

remove the headrests before folding

the seat back so that it can be fold-

ed as flat as possible against the

seat.

Storage position

– the back of the rear bench seat,

for normal loading (example A );

(depending on the vehicle)

This allows for more space to store

things in the boot.

– Remove the mobile floor 1 ;

– move the rear bench seat for-

wards using the lever located at the

rear seats ꢀ 52;

Note: in the absence of an emer-

gency spare wheel or tyre inflation

kit, do not load the bottom of the lug-

gage compartment.

3 2 0 - Y o u r c o m f o r t

TRANSPORTING OBJECTS

Towbar

Permissible nose weight,

maximum permissible

towing weight while

braked and unbraked: ꢀ 380.

Choice and fitting of towing

equipment

Towbar (cross member and

hitch) not originally fitted to the

vehicle: the overall weight of

the towbar and mountings must

not exceed 28 kg.

4

Any towing device must not ob-

struct any lighting component

or the number plate when not in

use.

In all cases, you must comply

with the regulations of the par-

ticular country you are in.

For fitting and conditions of use,

refer to the equipment’s fitting

instructions.

Maximum dimension A : 1,016 mm.

Always position the

heaviest items directly

on the floor.

If the vehicle is

equipped, use the lashing points

1 located on the luggage com-

partment floor.

The luggage should be loaded

in such a way that no items will

be thrown forward and strike

the occupants if the driver has

to brake suddenly.

Please keep these instructions

with the rest of the vehicle doc-

umentation.

Fasten the rear seat belts, even

if the seats are not occupied.

Y o u r c o m f o r t - 3 2 1

TRANSPORTING OBJECTS

Roof bars

ly arranged and secured and should

not interfere with the operation of

the tailgate.

For information on the

range of equipment

Accessing the mounting points

adapted to your vehicle,

we advise you to consult an ap-

proved dealer.

Spoiler A

Refer to the fitting instructions

for information on how to fit

roof bars and conditions of use.

Please keep these instructions

with the rest of the vehicle doc-

umentation.

4

Maximum permissible load on

roof rack ꢀ 380.

If original roof bars, ap-

proved by our Techni-

cal Department, are

Open the doors to access the

mounting points 1 .

supplied with screws,

only use these screws for at-

taching the roof bars to the ve-

hicle.

It is prohibited to at-

tach any carrying

equipment (bike rack,

luggage box etc.) rest-

ing against the spoiler or tail-

gate. To install a carrying de-

vice on your vehicle, contact an

approved dealer.

User precautions

Using the tailgate

Before using the tailgate, check the

objects and/or accessories (bicycle

racks, roof boxes, etc.) attached to

the roof bars: they should be proper-

3 2 2 - Y o u r c o m f o r t

Your comfort for Your Renault Symbioz 4 Door First Generation (2024-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals