Get Your comfort -> AIR CONDITIONING: programming Guide for Renault Zoe 4 Door First Generation (2012-2018)

3.9

AIR CONDITIONING: programming (1/4)

Adjusting the programming

With the vehicle connected to a power

source, this function enables:

– a comfortable temperature prior to

using the vehicle;

– optimisation of the vehicle range.

The programmable air-conditioning

is triggered the hour before the pro-

grammed hour in order to reach a com-

fortable temperature.

Driver’s responsibility

when parking or stopping

the vehicle

Never leave an animal,

child or adult who is not self-suffi-

cient alone on your vehicle, even for

a short time.

In hot and/or sunny weather, please

remember that the temperature

inside the passenger compartment

increases very quickly.

RISK OF DEATH OR SERIOUS

INJURY.

Operating conditions

– the ignition must be switched off;

– the vehicle must be locked;

– the traction battery charge level must

be greater than 45% for the function

to be triggered;

– the vehicle has to be plugged into

the mains;

– programming should be done at

least one hour prior to departure;

and

– air-conditioning programming must

be activated.

Depending on the vehicle, the pro-

gramming is done from:

– the multimedia display;

– the vehicle settings customisation

menu.

The integrated warning light in

button 1 and warning light



come on.

3.10

AIR CONDITIONING: programming (2/4)

The two programmed times cannot

be activated simultaneously.

From the multimedia

display A

Setting the start time for the

function

You can set two different times.

– press button 1 for quick access to the

programming menu on display A;

– select “Change” on one of the two

set times;

– adjust the hours then the minutes,

then confirm.

The function is triggered one hour prior

to the programmed time to reach a

comfortable temperature.

The warning lights integrated in the

button 1, the AUTO button 2 and the

warning light

 on the instrument

panel are lit up.

“Programme” activation

– With the ignition switched on and the

air-conditioning operating (please

refer to the information on “Automatic

air-conditioning” in Section 3);

– select the programme to be acti-

vated from menu “Comfort timer“;

– make sure one of the programmes is

confirmed.

– switch off the engine;

– plug the vehicle into a power source;

– lock the vehicle.

3.11

From the vehicle settings

customisation menu 3

Setting the start time for the

function

You can programme a single time.

– briefly press button B or C to access

the menu “PROGRAMMING”;

– press and hold button B or C to con-

firm;

– briefly press button B or C to access

the menu “Warm up cabin for”;

– press and hold button B or C to con-

firm;

– briefly press button B or C to access

the clock settings;

– hold down button B or C - the hours

flash;

– press buttons B and C to set the

hour;

– hold down button B or C to confirm

the hour setting;

– the minutes flash - press buttons B

and C to set the minutes;

– hold down button B or C to confirm

the minutes setting. Your settings are

now saved.

AIR CONDITIONING: programming (3/4)

3.12

Stopping the programmed air

conditioning

The air conditioning stops automati-

cally around ten minutes after the set

end time.

However, the function can be deacti-

vated if:

– the charging socket is disconnected;

– the “Remote Activation” function is

activated – please see the informa-

tion on “Air conditioning: remote acti-

vation” in Section 2;

– the traction battery charging level is

lower than 30%.

Driver’s responsibility

when parking or stopping

the vehicle

Never leave an animal,

child or adult who is not self-suffi-

cient alone on your vehicle, even for

a short time.

In hot and/or sunny weather, please

remember that the temperature

inside the passenger compartment

increases very quickly.

RISK OF DEATH OR SERIOUS

INJURY.

AIR CONDITIONING: programming (4/4)

Connected services

The air conditioning can also be acti-

vated using the connected services.

For more information regarding the op-

erating conditions, please contact an

authorised dealer.

“Programme” activation

– With the ignition switched on and the

air-conditioning operating (please

refer to the information on “Automatic

air-conditioning” in Section 3);

– press the button 1.

The function is triggered one hour prior

to the programmed time to reach a

comfortable temperature.

The warning lights integrated in the

button 1, the AUTO button 2 and the

warning light

 on the instrument

panel are lit up.

Your comfort -> AIR CONDITIONING: programming for Your Renault Zoe 4 Door First Generation (2012-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals