Get Driver information -> Road signs detection system Guide for Seat Arona 4 Door First Generation (2017-2026)

RoadDsirgivnesrdineftoercmtiaotniosnystem

The ﬁgure displayed are the kilometres that

can still be travelled or the time until the next

service.

Checking the date on the digital instrument

panel:

●

If you reset the display manually, the next

service interval will be indicated as in vehi-

cles with ﬁxed service intervals. For this rea-

son we recommend that the service interval

display be reset by an authorised dealer.

●

The date of the service can only be read

through the Service ››› page 24 menu.

Service due

Resetting service interval display

When it is time for a service or an inspection,

an audio warning will sound when the ignition

is switched on, and a spanner symbol may ap-

pear for a few seconds on the instrument clus-

ter display , along with one of the following

messages.

If the service was not carried out by a SEAT

dealership, the display can be reset as follows:

Road signs detection sys-

tem

●

The service interval display can only be reset

through the Service ››› page 24 menu.

Introduction¹⁾

Do not restart the indicator between the

service intervals, otherwise the information dis-

played will be incorrect.

●

Service now!

The dynamic road signs display records stand-

ard road signs using a camera ﬁtted to the base

of the interior mirror, and provides information

about speed limits and overtaking prohibitions.

●

Please have your vehicle inspected

●

Oil change service due!

If the oil change service is reset manually, the

service interval display changes to a ﬁxed serv-

ice interval, also in vehicles with Flexible oil

change service.

●

due!

Oil change service and inspection

Within its limitations, the system also displays

a additional sign to indicate aspects such as

temporary prohibitions. Even on routes without

signs, the system can, if necessary, display the

applicable speed limits.

Consult a service notiﬁcation

With the ignition switched on, the engine o

and the vehicle at a standstill, the current serv-

ice notiﬁcation can be read:

Note

●

The service message disappears after a

The dynamic road sign display system is acti-

vated whenever the ignition is switched on.

few seconds, when the engine is started or

when the button is pressed on the multi-

function steering wheel.

Check the date of the current service on the

infotainment system

Trac sign recognition does not work in all

countries. Keep this in mind when travelling

abroad.

●

Press the function button

Data > Set-

●

In vehicles with the LongLife system in

tings > Service; OR

tus.

> Vehicle sta-

which the battery has been disconnected for

a long period of time, it is not possible to cal-

culate the date of the next service. Therefore

the service interval display may not be cor-

rect. In this case, bear in mind the maximum

service intervals permitted ››› page 301.

Not available on all markets.

Driver information

The road signs detected by the system are

displayed on the instrument cluster display

››› Fig. 10 and, depending on the navigation

system ﬁtted in the vehicle, in the infotainment

system as well .

Dynamic road sign display: Cur-

rently restricted

Shown on the display

●

The navigation system is not transmitting

data. Check if the navigation system has upda-

ted maps.

●

OR: the vehicle is in a region not included on

Road sign detection system messages:

the navigation system's map.

There are no road signs available

No data available

●

The system is in its start-up phase.

●

The trac sign recognition system does not

OR: the camera has not recognized any man-

work in the country you are currently driving in.

datory or prohibitive signs.

Display of trac signs

Error: Dynamic road sign display

●

After checking and evaluating the information

from the camera, the navigation system and

the current vehicle data, the system displays

up to three current road signs with their addi-

tional signs.

There is a fault in the system. Have the system

checked by a specialised workshop.

Speed warning is currently unavail-

able

●

The speed warning function of the road sign

●

First: The sign that is currently valid for the

detection system is faulty. Have the system

checked by a specialised workshop.

driver is shown on the left side of the display.

For example, a maximum speed limit of 130

Dynamic road sign display: Clean

the windscreen!

Fig. 10 On the instrument cluster screen:

examples of recognised speed limits or

overtaking prohibitions with their respective

additional signs.

km/h (100 mph)

●

Second: A sign valid only in certain circum-

●

The windscreen is dirty in the camera area

stances, e.g. 100 km/h (60 mph) is shown sec-

ond, together with the additional rain sign.

or the camera’s visibility is impaired by weather

conditions. Clean the windscreen.

●

Additional sign: Displays the circumstances

In Germany, on motorways and normal roads

for vehicles, besides speed limits and overtak-

ing provisions the system also displays end of

restriction signs. In all other countries the cur-

rently valid speed limit is displayed instead.

(rain, times of day, fog, etc.) under which the

displayed speed limit is in force.

●

Third: Thirdly, a sign prohibiting overtaking

is partially displayed. If there is no conditional

speed limit and overtaking is prohibited, the lat-

ter sign will be displayed in second place

RoadDsirgivnesrdineftoercmtiaotniosnystem

Limited operation

Driving with the speed warning func-

tion

WARNING

The technology in the trac sign detection

system cannot change the limits imposed by

the laws of physics and only works within the

system's limits. The increased convenience

provided by the dynamic road sign display

system should not lead you to take any risks.

The system is not a replacement for driver

awareness.

The trac sign detection system has certain

limitations. The following cases may lead the

system to operate with limitations or not at all:

Operating conditions

The speed warning function gives warnings at

speeds above 20 km/h.

●

In the case of poor visibility, e.g. in snow, rain,

fog or intense mist.

●

In cases of dazzling, e.g. caused by head-on

Connection and disconnection

trac or by the sun.

Depending on the country, the speed warning

function is always activated when the ignition

is switched on. In this case, the infotainment

system displays an overview of the individual

systems and automatically activated functions

in the input menu.

●

Adapt your speed and driving style to

●

When driving at high speeds.

suit visibility, weather, road and trac condi-

If the camera is covered or dirty.

tions.

If the trac signs are partially or totally ob-

●

Poor visibility, darkness, snow, rain and fog

structed, e.g. by trees, snow, dirt or other vehi-

cles.

may result in the system not displaying road

signs, or not displaying them correctly.

If desired, you can deactivate the speed warn-

ing manually in the infotainment system:

●

In the case of trac signs that do not fulﬁl the

●

If the camera’s ﬁeld of view is dirty, cov-

regulations.

ered or damaged, the operation of the sys-

1. Open the Assistance systems menu.

●

tem may be aꢀected.

In the case of damaged or bent trac signs.

2. Switch the speed warning on or o in the

In the case of variable messages on over-

corresponding submenu.

head or gantry signs (LED-based variable traf-

ﬁc signs or other lighting units).

WARNING

The driving recommendations and trac in-

dications shown on the trac sign detection

system may diꢀer from the actual current

trac situation.

Activating and deactivating the audible

warning

●

If the maps on the navigation system are not

up-to-date.

●

In the case of adhesives axed to vehicles

In the infotainment system:

that depict trac signs, e.g. speed limits on lor-

ries.

●

The system cannot recognise or display all

1. Open the Assistance systems menu.

2. Open the Speed Warning.

road signs correctly.

●

Trac signs and trac regulations have

3. Activate or deactivate the audible warn-

ing under the corresponding option

››› page 35.

priority over the recommendations and dis-

plays provided by the system.

Driver information

In the infotainment system:

Speed warning function warning lev-

els

Note

1. Open the Assistance systems menu.

2. Open the Speed Warning.

The audible warning is activated whenever

the ignition is switched on.

If the system detects that the maximum permit-

ted speed has been exceeded, it will indicate

this visually on the instrument cluster screen by

ﬂashing the speed limit detected by the system

and, depending on the conﬁguration, will also

issue an audible warning. A warning is issued at

two levels.

3. Activate or deactivate the change

tone under the corresponding option

››› page 35.

Adjusting the warning thresholds

You can manually adjust the warning thresholds

of the speed warning function.

Concealing fault messages via the multi-

function steering wheel

In the infotainment system:

1. Open the Assistance systems menu.

2. Open the Speed Warning.

1. Press the button on the multifunction

steering wheel.

3. To select the level of the warning thresh-

Trailer mode

olds, tap

in the Overtaking warning

››› page 35 menu option.

For vehicles with a factory-installed towbar and

a trailer with electrical connection to the vehi-

cle, the recognition of trac signs that may

apply to the vehicle when towing a trailer, for

example applicable speed limits and no over-

taking signs, can be activated or deactivated

in the vehicle settings menu in the infotainment

system.

Note

When the vehicle's ignition is switched on,

the warning thresholds for the speed warning

are always reset to the default value.

Fig. 11 On the instrument cluster screen:

violation of the detected speed limit

(illustration).

Activation and deactivation of the speed

change warning tone

In trailer mode, the recognition of valid speed

limits can be adjusted to suit the type of trailer

and country-speciﬁc legal requirements.

The speed change warning tone provides the

driver with audible information about a change

in the speed limits. If desired, you can manually

switch o the change tone.

Speed warning - Level 1

In the infotainment system:

Speed limit violation detected. The speed limit

detected by the system ﬂashes continuously on

the instrument cluster and, depending on the

equipment, on the front display ››› Fig. 11.

1. Open the Assistance systems menu.

2. Open Trailer detection.

3. To adapt the warning threshold to the trailer

mode, tap on

menu option.

in the Overtaking warning

Driver information -> Road signs detection system for Your Seat Arona 4 Door First Generation (2017-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals