2017-2026 Seat Arona 4 Door Infotainment system -> Navigation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment system -> Navigation for Your Seat Arona 4 Door First Generation (2017-2026)

Navigation
Navigation  
Introduction  
Fig. 142 Schematic diagram: Navigation view.  
A global satellite system determines the current  
position of the vehicle and the sensors moun-  
ted on the vehicle analyse the routes taken.  
All measured values and possible trac events  
are compared with the available maps to allow  
optimal navigation to the destination.  
During dynamic route guidance, you will re-  
ceive information about reported trac con-  
gestion on the route. An additional navigation  
announcement is given if the route is recalcula-  
ted due to trac congestion.  
Navigation announcements  
Navigation announcements are acoustic indi-  
cations for driving referred to the current route.  
The type and frequency of navigation an-  
nouncements depend on the driving situation,  
for example, starting the guide to the destina-  
tion, driving on the motorway or on a round-  
about and the settings.  
While a navigation announcement is playing,  
its volume can be adjusted. The following navi-  
gation announcements provided will be played  
with the newly adjusted volume.  
Navigation announcements and graphic repre-  
sentations will guide you to your destination.  
Navigation management is carried out on the  
screen.  
If the exact destination cannot be reached be-  
cause, for example, it is in a non-digitised area,  
indications relating to the address and the dis-  
tance to the destination are displayed on the  
screen.  
Limitations during navigation  
Depending on the country, some functions of  
the infotainment system will not be available  
on the screen when travelling above a certain  
speed. It is not a malfunction, but is due to com-  
pliance with legislation.  
If the infotainment system cannot receive data  
from GPS satellites, for example, in a tunnel or  
in an underground garage, navigation contin-  
ues using the vehicle's sensors.  
213  
Infotainment system  
●
●
In areas that are not digitised or are only parti-  
ally digitised on the infotainment memory, the  
infotainment system will still attempt to provide  
route guidance.  
Press on the map with both fingers at the  
Press on the map with both fingers at the  
same time.  
same time and keep them pressed.  
●
To rotate the map view, turn your fingers  
Change view  
clockwise anticlockwise.  
In the case of missing or incomplete navigation  
data, it may not be possible to determine the  
exact position of the vehicle. This may mean  
that navigation is not as precise as usual.  
Tip: use your index finger  
Saved data  
●
Press twice on the map and keep your finger  
The infotainment system saves certain data, for  
example, frequent routes and position data, to  
make the entry of the destination more agile  
and optimise the route guidance.  
pressed on the screen.  
●
To zoom out the view of the map, move your  
Roads and streets are subject to constant  
change (e.g. new roads, road works, roads  
closed to trac, changes to street names and  
building numbers). If the navigation data is ob-  
solete, this may lead to errors or inaccuracies  
during the route guidance.  
finger upwards. To zoom in the view of the map,  
move your finger downwards.  
Delete saved data  
Change view  
●
Press Settings > Basic function settings >  
Tip: use your thumb and index finger  
Delete and then Accept.  
●
Press on the map with both fingers at the  
Managing the navigation map  
same time and keep them pressed.  
WARNING  
To allow an optimal view, you can also man-  
age the navigation map with additional finger  
movements.  
●
To zoom out the view of the map, move one  
Select the settings, enter the destination and  
the modifications for navigation only with the  
vehicle at a standstill.  
finger towards the other. To zoom in the view of  
the map, move one finger away from the other.  
Moving the map  
Tilt the view  
Note  
Tip: use your index finger  
Tip: use your index and middle fingers  
●
Move the map with your finger.  
●
If a detour is passed during route guidance,  
●
Press on the map with both fingers at the  
navigation may recalculate the route.  
same time and horizontal to each other, keep  
Zoom in  
them pressed.  
●
The quality of the navigation recommen-  
dations given by the Infotainment system de-  
pends on the navigation data available and  
any reported tra„c congestions.  
●
To tilt the view of the map forward, move your  
Tip: use your index finger  
fingers upwards. To tilt the view of the map  
backward, move your fingers downwards.  
●
To increase the view in a certain position,  
double-click on the map.  
●
Navigation announcements are not emit-  
ted if the sound is muted in the infotainment  
Rotate the map  
Zoom out  
system.  
Tip: use your thumb and index finger  
Tip: use your index and middle fingers  
214  
Navigation
Home address.  
Favourite destinations.  
Back  
Navigation functions and symbols  
Work address.  
Navigation  
Favourite destinations.  
Navigation functions depend on the equipment  
and country.  
Symbols in the route details  
Current position.  
Additional window with more options.  
Additional window with route options.  
Centre the map on the current position.  
Destination of the current guidance.  
Functions  
●
Entering the destination and route calcula-  
POI symbols (points of interest)  
tion (oŽine and online).  
Change view: 2D oriented to the north, or  
2D oriented to the direction of travel, or  
3D to the direction of travel.  
POIs (points of interest) are shown on the map,  
provided the navigation has said data.  
●
Display of two navigation maps at the same  
time (screen and instrument cluster).  
Click on the desired POI (point of interest) to  
start a route guidance ››› page 216.  
Information about the current route guid-  
ance.  
●
●
●
●
●
Update of online maps.  
Predictive navigation.  
Petrol station.  
Parking lot.  
Map scale.  
3D urban maps.  
Online trac information.  
Dynamic POIs (points of interest).  
Symbols in the additional window  
Tourist information oces.  
Train station.  
●
To open the additional window, press  
.
Repeat the last navigation announcement.  
Volume of navigation announcements.  
Symbols on the map  
Restaurant.  
The buttons and indications depend on the set-  
tings and the current driving situation.  
Tra„c information.  
Map lighting in Automatic, Day or Night  
mode.  
POIs (points of interest) are shown on the  
map, provided the navigation has said data  
››› page 218.  
Symbols for trac events and points of inter-  
est (POIs) are displayed on the map, for exam-  
ple, petrol stations, train stations or interesting  
stopovers, provided navigation has such data  
››› page 218.  
O„er new guidance routes.  
Other symbols  
Entering the detailed destination for an ad-  
Click on a trac event to open an additional  
window with further details ››› page 218.  
Current position.  
dress.  
Slow trac.  
Search for destinations.  
Destinations along the route.  
Final destination.  
Search for destinations.  
Frequent destinations.  
Last destinations.  
Trac jam.  
215  
Infotainment system  
Accident.  
Using obsolete data may lead to errors during  
navigation. Current routes cannot be traced or  
the route guidances will lead to mistaken desti-  
nations.  
WARNING  
If you update the navigation data manually  
while driving, it may cause accidents with se-  
rious injuries.  
Broken down vehicle.  
Slippery surface (ice or snow).  
Road closed to trac.  
Slippery road hazard.  
Danger.  
Ensure navigation data is updated at all times.  
●
Update the navigation data only with the  
vehicle at a standstill.  
Online updating of navigation data  
The navigation data of the regions through  
which you travel frequently is automatically up-  
dated in the background if the Internet connec-  
tion is established and the privacy settings are  
valid.  
Note  
Automatic update of the navigation data is  
subject to the privacy settings. No update is  
made in incognito mode.  
●
With the ignition switched on, the navigation  
Road works.  
data is updated automatically.  
Start route guidance  
Strong wind.  
Manual update of navigation data  
Depending on the country and equipment, dif-  
ferent functions are available to enter destina-  
tions.  
Current navigation data for large regions, for  
example Western Europe, can be downloaded  
from www.seat.com and stored on USB data  
devices.  
Reduced visibility.  
The di„erent functions for entering destinations  
are found in the navigation main menu.  
●
Download the navigation data to a USB data  
Navigation data  
device.  
Opening the Navigation main menu  
The Infotainment system is equipped with a  
built-in navigation data memory. Depending  
on the country, the necessary navigation data  
may already be pre-installed.  
●
●
Turn on the ignition of the vehicle.  
●
Press HOME >  
.
Connect the USB data device to the infotain-  
ment system. Navigation data is automatically  
updated in the background.  
Select the destination and start navigation  
1. Press  
2. Select the desired destination. You can  
chose from Frequent destinations,  
.
To provide correct route guidance and make  
the most of the functions o„ered, the infotain-  
ment system should be updated on a regular  
basis.  
The map version is displayed in HOME >  
System information.  
>
Last destinations or  
nations.  
Favourite desti-  
216  
Navigation
OR: press  
input screen.  
and enter the address in the  
To save a destination as a favourite press  
the split screen when entering the destination.  
in  
Start navigation:  
1. Press  
.
OR: detailed address.  
3. Press Start.  
Select the destination and start navigation:  
2. Move the view on the map until the desired  
position can be selected. The navigation  
map can be used by means of additional  
finger movements ››› page 213.  
1. Press  
and then  
.
2. Press the desired destination.  
Frequent destinations  
3. Press Start.  
3. Press the desired destination on the map.  
The destination synopsis uses recorded data to  
propose possible destinations.  
4. Press Route.  
Note  
Select the destination and start navigation:  
Enter the destination as accurately as possi-  
ble. If you enter a destination incorrectly, the  
route guidance will not be able to start or it  
will guide you to an incorrect destination.  
Oꢀroad navigation  
1. Press  
and then  
.
“O„road navigation” calculates routes to se-  
lected destination points using unknown data.  
When a destination point is outside the known  
roads or position data, navigation finds the  
route to the next point of the known road and  
completes the path to the next destination  
point with a direct connection.  
2. Select the desired destination. The route  
guidance starts automatically.  
Quick start: for a quick start, press and hold  
the desired destination for a few seconds.  
Start route guidance by selecting from the  
map  
The navigation map includes active areas at  
many points that are suitable for entering the  
destination. To do this, press the desired posi-  
tion or place on the map. If there is map data at  
this point, you can start a route guidance.  
Recent destinations  
Start navigation:  
Navigation saves the last destinations to make  
them available for a route guidance.  
1. Move the view on the map until the desired  
position can be selected. The navigation  
map can be used by means of additional  
finger movements ››› page 213.  
Select the destination and start navigation:  
1. Press  
and then  
.
Whether it is possible to enter the destination  
through the navigation map depends on the  
state of the data and it is not possible for all  
positions.  
2. Press the desired destination.  
2. Press on any point on the map without posi-  
tion data.  
3. Press Start.  
3. Press Route.  
Quick start: for a quick start, press and hold  
the desired destination for a few seconds.  
To start “o„road navigation”, press an empty  
area without position data.  
Start route guidance using contact details  
Favourite destinations  
Start route guidance with the saved address  
data of a contact. Contacts saved without ad-  
dress data cannot be used for route guidance.  
Save up to 20 destinations as favourites.  
217  
Infotainment system  
Start navigation:  
1. Press  
mation is another vehicle that has detected the  
hazard and has uploaded the information to the  
service provider.  
Open and close the route details  
●
●
.
To open them, press or swipe it.  
To close them, press or swipe it.  
2. Press on the contact you want.  
The hazards shown are: accident, broken down  
vehicle and slippery road surface.  
3. Press Route.  
Edit route guidance  
Note  
To edit the route guidance, move the stopovers  
to the destination in the TripView view.  
Tra„c flow indication  
If the address details of a contact are ob-  
solete, the route guidance will nevertheless  
take you to the registered address. Check  
that the contact address is updated.  
The navigation map shows trac flow accord-  
ing to current trac events, highlighting the  
road network in colour.  
●
Hold the desired destination pressed until it is  
visibly highlighted.  
●
●
Move the destination to the desired position.  
●
●
Yellow: Slow trac.  
Red: Trac jam.  
Remove your finger from the screen. The  
Tra‡c information  
route will recalculate.  
Note  
The infotainment system receives detailed traf-  
fic information automatically if the Internet con-  
nection is established. This information is shown  
with symbols and highlighting the road network  
in colour on the map.  
Avoid tra„c incidents  
Tra„c information receipt is subject to the  
privacy settings. In maximum Privacy mode,  
no tra„c information is received. Tracking or  
Location level setting is necessary.  
The details of the route show the current traf-  
fic incidents if the navigation has such data.  
Avoid trac incidents by editing route details  
››› page 218.  
Tra„c incidents  
●
●
Press on a trac event.  
Function descriptions  
Trac incidents, for example, trac jams or  
congested trac, are shown on the navigation  
map using symbols.  
Press on Avoid. The route will recalculate.  
Route details  
Split screen  
The route details contain information on all inci-  
dents, for example, the starting point, stopovers,  
trac events, POIs and destination, provided  
the navigation has such data.  
With an active route guidance, trac incidents  
that are on the current route are shown in the  
route details. Such trac incidents can be avoi-  
ded ››› page 218, Function descriptions.  
When handling navigation functions, an addi-  
tional window with other options may open.  
Possible options depend on the function being  
used.  
If you press on an incident, an additional win-  
dow opens providing more options. The avail-  
able options depend on the incident and the  
current settings.  
Hazard information  
Hazard information is shown on the navigation  
map with symbols in the same way as trac  
incidents. In this case, the source of this infor-  
218  
Navigation
Navigation can propose up to 5 routes at the  
same time. The proposed routes may be di„er-  
ent from the routes of the normal route guid-  
ance.  
Close the additional screen  
●
Press on an empty area outside the addi-  
tional window.  
●
●
OR: press  
.
If one of the proposed destinations is selected,  
the guide to that destination is started.  
OR: press Accept.  
The route guidance follows the selected route  
until the vehicle deviates from it. In that case,  
the route is recalculated and takes you back  
along the most direct path to the initially selec-  
ted destination.  
Functions in the additional window:  
Show on  
map  
Show what is selected on the map.  
Add stop-  
Add a stopover to the route guid-  
over desti- ance.  
nation  
Important trac jams are taken into account  
in the route guidance, and are avoided if alter-  
native routes are available, provided navigation  
has such data.  
Direct  
route  
Starts direct route guidance.  
You can activate and deactivate the function  
whenever you want.  
Delete  
Delete a stopover from the route  
guidance.  
Avoid  
Avoid tra„c jam. The route will re-  
calculate.  
Enable and disable learning usage pattern  
The setting is in the corresponding navigation  
Stop route Ends the current route guidance.  
guidance  
menu  
> Basic function settings.  
●
To activate the function, activate Learn us-  
Close the additional window.  
Add a destination to favourites.  
age pattern.  
●
To disable the function, disable Learn usage  
pattern.  
●
To delete saved data, press Delete usage  
Learn usage pattern  
pattern.  
When the vehicle is in motion, navigation saves  
routes and destinations used to automatically  
generate destination proposals. Destinations  
are learned based on the time of day and the  
day of the week.  
219  

Related Topics

Infotainment system
First steps Overview and controls General instructions for use Voice control Radio mode Media Mode Telephone interface

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot