Lights
adjustment must be reset to its original status.
If you do not have experience with this type of
adjustment, SEAT recommends that you go to a
technical service centre.
In some cases, e.g. when driving through a tun-
nel without the automatic dipped beam light
function switched on, the instrument clus-
ter lighting may even switch o. The objective
of this function is to provide the driver with a
visual indication that he or she should activate
the dipped beam. If your vehicle is fitted with
a digital instrument cluster, the message Turn
on the lightswill be displayed on the in-
strument cluster.
a few seconds after closing all the doors,
when locking the vehicle or connecting the
ignition.
Turning the reading light on and o
Note
The light controls may vary depending on the
vehicle version.
“Tourist light” is only allowed temporarily. If
you are planning a long stay in a country that
drives on the other side, you should take the
vehicle to an Authorised Technical Service to
change the headlights.
Luggage compartment lighting
The light is activated when the rear lid is open,
even when the ignition and lights are turned o.
For this reason, ensure that the rear lid is always
closed.
Interior and reading lights
Interior lights
Background lighting
Lighting of the instrument cluster,
displays and controls
The background lighting lights up the area of
the centre console and the footwell area and,
depending on the version, the front door panels
and the air vents as well.
The brightness of the instrument and control
lighting can be adjusted in the infotainment
system:
It will be switched on at full brightness when the
doors are opened and the lights will be dimmed
●
Select
> Settings > Lighting >
Vehicle interior lighting; OR
Interior settings > Lighting > In-
>
during driving, when the light selector is in
or
,
Fig. 73 Detail of headliner: front interior
lighting.
.
strument cluster.
The brightness and colour of the background
lighting can be adjusted in the infotainment
Turning the interior lights on or o.
The set intensity automatically adapts to
changes in ambient brightness in the vehicle.
menu using the function button
> Set-
tings > Background lighting; OR
Background lighting.
>
Door contact connection. The interior
lights come on automatically when you
unlock the vehicle, open a door or remove
the key from the ignition. The light goes out
When the automatic dipped beam light
is turned on, a sensor automatically turns the
dipped beam light on or o, as well as the in-
strument and control lighting, depending on the
ambient brightness.
92
English 
