Storing objects
●
●
Remove the side cover by sliding it upwards.
Place the luggage compartment shelf in the
Variable floor in the tilted position
When the variable floor is tilted you can access
the spare wheel or anti-puncture kit area.
space provided for this purpose.
●
Place the cover back in its original position.
●
Lift the variable floor in the high position using
1
handle ››› Fig. 147 , pull it up and push it
towards the backrest of the rear seats until it
folds along the hinge line and the movable part
of the floor is resting on itself.
Variable luggage compartment floor
●
Rest the floor on its housings ››› Fig. 148 (ar-
rows).
Fig. 148 Variable boot floor: tilted position.
Variable floor in high position
WARNING
●
Always secure objects, even when the lug-
●
To move from the low position to the high po-
gage compartment floor is properly lifted.
sition, lift the floor using the handle ››› Fig. 147
1
, and pull it back until the front of the floor
●
Only objects that do not protrude more
2
has fully passed the supports
.
than 2/3 the height of the floor may be car-
ried between the rear seat and the raised
luggage compartment floor.
●
Move the floor forward over the supports as
far as the rear seat backrest and then lower the
1
●
floor with the handle
.
Only objects that do not weigh than ap-
proximately 7.5 kg may be carried between
the rear seat and the raised luggage com-
partment floor.
Variable floor in low position
●
To move from the high position to the low po-
sition, lift the floor using the handle ››› Fig. 147
1
, and pull it back until the front of the floor
2
has fully passed the supports
.
●
Now let the front part fall to the floor and
Fig. 147 Variable luggage compartment floor:
raised position; lowered position.
slide the floor forwards as far as the rear seat
backrest; lower the floor at the same time with
1
the handle
.
228
English 
