Get Technical data -> Technical specifications Guide for Seat Ateca SUV First Generation (2016-2020)

Transport and practical equipment

Retaining hooks

Net bag*

●

Always use belts or retaining straps that

are suitable and in a good condition.

●

Belts and retaining straps should be se-

curely fastened to the fastening rings.

●

Objects in the luggage compartment

that are unsecured could move suddenly

and modify the handling of the vehicle.

●

Secure all objects, little and large.

●

Never exceed the maximum tensile load

of the fastening ring when securing objects.

●

Never secure a child seat to the fastening

rings.

Fig. 177 In the boot: retaining hooks.

Fig. 178 In the boot: net bag hooked up at floor

level.

At the rear of the luggage compartment, on

the left and right, there are fixed retaining

hooks››› Fig. 177.

Note

●

The maximum tensile load that the fas-

tening rings can support is 3.5 kN.

The retaining hooks have been designed to

secure light shopping bags.

●

Belts and securing systems for the ap-

propriate load can be obtained from speci-

alised dealerships. SEAT recommends visit-

ing a SEAT dealership for this.

WARNING

●

Never use the retaining hooks as fastening

rings. In case of sudden braking or an acci-

dent, the hooks could break.

The fastening rings are rendered unusa-

ble for versions with a spare wheel.

Fig. 179 In the boot: rings

and hooks

for

CAUTION

attaching the net bag.

Each hook is designed for a maximum load

of 2.5 kg.

The luggage compartment prevents light

luggage from moving. The net bag has a zip

and can be used to store small objects.

The net bag can be hooked up to the lug-

gage compartment in different ways.

173

Operation

Hooking the net bag into the luggage

compartment floor

Luggage compartment variable

floor

●

Always secure the net hooks properly so

that they do not suddenly release from the

fastening rings when hooking or unhooking

them.

●

As applicable, lift the front fastening rings

››› Fig. 178

●

On hooking or unhooking them, protect

Secure the net hooks to the fastening rings

››› . The bag zip should be facing up-

your eyes and face in case the hooks are

released suddenly.

wards.

●

Always hook up the net bag hooks in the

●

Secure the net hooks to the fastening rings

described order. If a hook is unexpectedly

released the risk of injury is increased.

Hook the net bag next to the load thresh-

old

●

Secure the short net hooks to the fastening

rings››› Fig. 179 ››› . The bag zip should

be facing upwards.

●

Secure the straps in the bag hooks

Removing the net bag

The hooked up net bag is taut›››

●

Remove the hooks and the net bag straps

from the fastening rings and from the bag

hooks.

Fig. 180 Variable boot floor:  raised position;

 lowered position.

●

Store the net bag in the luggage compart-

ment.

WARNING

To secure the elastic net bag on the fasten-

ing rings it must be stretched out. Once

hooked up it is taut. If the net bag is hooked

up or unhooked incorrectly the hooks could

cause injuries.

174

Transport and practical equipment

Variable floor in the tilted position

ried between the rear seat and the raised

luggage compartment floor.

When the variable floor is tilted you can ac-

cess the spare wheel/anti-puncture kit area.

●

Only objects that do not weigh than ap-

proximately 7.5 kg may be carried between

the rear seat and the raised luggage com-

partment floor.

●

Lift the variable floor in the high position us-

ing handle››› Fig. 180 , pull it up and push

it towards the backrest of the rear seats until

the floor folds along the hinge line and the

movable part of the floor is resting on itself.

CAUTION

●

The maximum weight that can be loaded

●

Rest the floor on its housings››› Fig. 181 (ar-

on the luggage compartment variable floor

in the top position is 150 kg.

Fig. 181 Variable boot floor: tilted position.

rows).

●

Do not let the luggage compartment

Variable floor in high position

Variable floor with folded seats

floor fall when closing it. Always carefully

guide it downwards in a controlled manner.

Otherwise, the lining and the floor of the

luggage compartment could be damaged.

●

To move from the low position to the high

●

To move from the high position to the low

position, lift the floor using the handle

››› Fig. 180

●

››› Fig. 180 , and pull it back until the front

and pull it back a little.

of the floor has fully passed the supports

Push the variable floor towards the folded

●

Move the floor forward over the supports as

far as the rear seat backrest and then lower

rear seats with the handle

using some

Note

downward pressure so that the moving part

of the floor is flush with the backs of the rear

seats.

SEAT recommends the use of straps to se-

cure objects to retaining rings.

the floor with the handle

Variable floor in low position

WARNING

●

To move from the high position to the low

position, lift the floor using the handle

During a sudden driving or braking ma-

noeuvre, or in the event of an accident, ob-

jects could be flung though the interior and

cause serious or fatal injuries.

Roof carrier*

››› Fig. 180 , and pull it back until the front

of the floor has fully passed the supports

Introduction

●

Now let the front part fall to the floor and

●

Always secure objects, even when the

luggage compartment floor is properly lif-

ted.

slide the floor forwards as far as the rear seat

backrest; lower the floor at the same time

with the handle

The vehicle roof has been designed to opti-

mise aerodynamics. For this reason, cross

bars or conventional roof carrier systems

cannot be secured to the roof water drains.

●

Only objects that do not protrude more

than 2/3 the height of the floor may be car-

175

Technical data -> Technical specifications for Your Seat Ateca SUV First Generation (2016-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals