Get Communications and multimedia -> Bluetooth System* Guide for Seat Ibiza SUV Fourth Generation (2009-2017)

Operation

Short press

AUX-IN

Long press

But-

ton

Audio CD /

MP3 CD

PND (Micro SD/Blue-

Audio CD / MP3

PND (Micro SD/Blue-

tooth Audio)

Radio

AUX-IN

tooth Audio)

MODE

Cyclical source change

Function only available if the vehicle has a telephone unit (other than PND)

Key functions ¹⁾

Switching on/off

Bluetooth System*

The Bluetooth system is activated when the

ignition is turned on and it is deactivated

when the key is removed from the ignition.

If there is an in-

coming call

Press once: accept call

General information

During a call

Press once: it ends the call

This system allows you to connect your mo-

bile phone via Bluetooth connection and to

use the hands-free mode.

With the system activated, if the button

››› Fig. 80  (“PTT”) is pressed the voice con-

trol activates, and if there is no telephone

connected, Bluetooth visibility is turned on

and a search for a telephone begins.

Press once: the PND goes into tele-

phone mode (if not already in this

mode).

The hands-free device means that the tele-

phone can be used inside the vehicle; the

driver will not have to remove their hands

from the steering wheel nor will be distracted

from traffic.

Without an in-

coming call

Press twice: opens the call history of

the telephone connected to the PND.

If there is a call in process when the system

is deactivated, the active call is not cancel-

led, but transferred to the mobile phone.

Press three times: the first number in

the call history is called.

Available functions include making calls in

hands-free mode, access to the mobile

phone address book, access to the call list

and control of the voice recognition system.

Press once: the PND will display the

message “There is no telephone con-

nected, please connect a telephone”.

If no telephone

is connected

Bluetooth

Use compatible Bluetooth devices only. For

more information about compatible Blue-

tooth products, consult your dealership or

the SEAT website.

Before using the Bluetooth system, the mo-

bile phone should be connected to the vehi-

cle installation via Bluetooth ››› page 74.

If a telephone is already connected via Bluetooth

to the PND

Communications and multimedia

Some Bluetooth mobile phones are detected

and connected automatically when the igni-

tion is switched on. For this to take place the

telephone must be switched on and its Blue-

tooth function activated, and there must be

no active Bluetooth connection from other

devices.

●

WARNING

There may be restrictions on the use of

Bluetooth devices in some countries. Infor-

mation is available from the local authorities.

●

Before starting the trip, you should famili-

arise yourself with the different functions of

the Bluetooth system. Bluetooth system set-

tings should adjusted when the car is stop-

ped or by a passenger.

●

If you connect the mobile phone Bluetooth

system to a Bluetooth device, consult the

safety warnings in its instruction manual. Use

compatible Bluetooth products only.

●

Please concentrate on driving. As the driv-

●

If a call is received or made using the Blue-

Bluetooth connections are free.

er, you are also responsible for road safety.

For this reason, you should only use the func-

tions when the traffic situation allows so and

in a manner that allows you to maintain con-

trol of the vehicle. Otherwise, you run the risk

of causing an accident.

tooth system when the radio is switched off,

this will always automatically turn on provid-

ing that the ignition is switched on. The mes-

sage Phone will appear on the radio display

when a call is received.

Bluetooth^®is a registered trademark of Blue-

tooth^®SIG, Inc.

Declaration of conformity

●

If a call is received or made, the sound of

●

S1nn GmbH & Co. KG certifies that the UHV

High unit complies with the basic require-

ments and the rest of the relevant provisions

of the Directive 1999/5/CE. A copy of the

declaration of conformity can be found at

http://www.s1nn.de/certifications/uhv-high-

manual .

The speech system must not be used in ca-

the radio programme or other audio source

that is currently being listened to will be mut-

ed in order for the telephone conversation to

be carried out without unpleasant back-

ground noise.

ses of emergency, since the voice changes in

stressful situations. This could result in a

failed or delayed telephone connection. Al-

ways dial emergency numbers manually!

●

Always observe applicable legislation.

●

Adjust the volume of the conversation on

●

Adjust the volume so that external warning

the mobile phone to “maximum” and modify

the volume on the radio volume control.

sounds (e.g. emergency vehicles, etc.) are al-

ways audible.

Exchange of information between the mobile

phone and the Bluetooth system

Note

The mobile phone system sends the data and

the requests via Bluetooth to the mobile

phone that is connected. If the connected

mobile phone is temporarily “overloaded”, it

may not respond to the requests from the

Bluetooth system.

Compatibility with mobile phones

●

The voice control system is only available

in the following languages: Spanish, Mexican

Spanish, German, English, French, Canadian

French, Italian, Portuguese, Czech, Russian

and Dutch. For other languages, the prede-

fined language for the voice instructions is

English. Please take the vehicle to technical

services if you wish to change the language.

New models of mobile phones are being re-

leased constantly by the different brands,

with different operating systems and differ-

ent ways of operating. For this reason there

are some mobile phones that do not perform

some of the functions correctly or are even

totally incompatible. To help you when

In this case, wait for the mobile phone to re-

act or make a new call.

Operation

choosing a mobile phone, SEAT offers the re-

sults of the compatibility tests on different

mobile phones. Visit the SEAT website or ask

at your dealer.

system. Once the user profile has been cre-

ated, your telephone can be connected auto-

matically or manually . It is not necessary to

repeat the initial connection process each

time.

Bluetooth system components

Depending on your mobile phone model, cer-

tain functions may not be available or it may

be necessary to change the configuration. Fa-

miliarise yourself with your phone and read

the instruction manual to learn the possibili-

ties it offers.

A maximum of four user profiles can be cre-

ated. If you try to create a fifth profile, the

profile which has been inactive for the most

time will automatically be deleted.

The pairing process can take several minutes

depending on the size of the phone book.

Even when the mobile phone appears as

compatible in our list, we have noticed that

occasionally it is possible that the phone

presents an abnormal behaviour with the

system due to software errors. In this case,

we recommend you update the telephone

software. Mobile phone manufacturers usual-

ly make updates available on Internet for

their customers in order to improve the work-

ing of the phone.

The procedure for pairing your mobile phone

to the SEAT system for the first time is descri-

bed below.

Fig. 79 Display and handling components of

the Bluetooth system.

Pairing the mobile phone

››› Fig. 79 Necessary components

Follow the steps below to connect the mobile

phone to the vehicle's Bluetooth by search-

ing for devices from the mobile phone:

Multifunction control››› page 75

Radio››› Booklet Radio

In the event that you have various applica-

tions to make calls, such as internet calling,

the mobile will ask you from which applica-

tion you wish to make the call. Until confir-

mation is given you will not be able to make

the call.

●

Activate the Bluetooth in the mobile phone.

Turn on the ignition with the key. The vehi-

User profile

cle system will be visible to the mobile phone

via Bluetooth for 3 minutes. If 3 minutes have

passed you can also switch on Bluetooth visi-

bility again for 3 minutes more by pressing

the button  (“PTT”) ››› Fig. 80.

Each telephone must be paired to the Blue-

tooth system before using it for the first time.

If you try to make a call and it is not pro-

cessed, check your mobile phone as it is pos-

sible that a pop-up window on your tele-

phone is requesting you to select the pro-

gram with which to make the call.

When pairing a mobile phone for the first

time, you will be asked to create a user pro-

file. A user profile is necessary for you to con-

nect the mobile phone to the SEAT Bluetooth

●

Search for Bluetooth devices using the mo-

bile phone. Refer to the mobile phone man-

ual for instructions.

Communications and multimedia

●

A list of devices found is displayed on the

telephone will automatically link up with the

SEAT telephone system under the following

conditions:

this, deactivate the Bluetooth on the unwan-

ted device.

mobile phone. From this list, select the de-

vice SEAT_BT.

Note

●

Next, accept the connection instructions on

the mobile phone.

●

The mobile phone is switched on with the

●

The visibility of the vehicle's Bluetooth sys-

Bluetooth function activated and the visibility

activated. The mobile phone must be close to

the vehicle.

tem is switched on for three minutes when

the ignition is switched on with the key. After

3 minutes, if you need to activate the visibili-

ty again, you can do so with the voice control

››› page 76 or turning the ignition off and on

again.

●

When requested, follow the steps to con-

firm/enter the PIN. If the mobile requests a

PIN to be entered this is 1234, which is the

factory setting and can only be changed at

the workshop. Depending on the technology

supported by your mobile the process can

vary given that some mobiles only request

confirmation of a request to link to SEAT_BT,

while others require the PIN 1234 to be en-

tered.

●

The vehicle system has switched on Blue-

tooth visibility (it will be on for 3 minutes fol-

lowing activation of the contact or after

pressing the button  “PTT”).

●

If for any reason you take more than 3 mi-

nutes to perform these steps or more than 30

seconds to enter the PIN, you will have to

start the process over again.

●

The automatic connection was accepted

during the questions of the first connection.

●

The connection to the system has not been

deleted in the mobile.

●

The contacts from the mobile phone's

memory and/or SIM card are transferred to

the vehicle system¹⁾. Some mobile phones

may display a message asking for confirma-

tion of access to the phone book or other op-

tions, these messages should be accepted in

order for the hands free system to access the

information contained on the mobile and in

order to carry out the complete functions of

the system.

With the ignition switched on, the system

searches in the memorised Bluetooth devices

(user profiles), and if one of these devices is

found a connection attempt is made to con-

nect to the last linked profile that meets the

previously mentioned requirements. The sys-

tem will continue connection attempts while

there is no connected device.

Controls on the multifunction control

When a Bluetooth device is connected or

when the automatic connection conditions

are met, in order to connect another Blue-

tooth device, an existing connection or one

that is in the process being connected must

be deactivated in advance. In order to do

●

The pairing is complete.

Automatic pairing

Fig. 80 Multifunction control buttons.

When the telephone has been connected and

the corresponding user profile created, your

Depending on the phone model and configuration.

Operation

You can use the HELP in any part of the

menu. If you have any doubts or cannot de-

cide the Command to use, the system will

provide you with the available options.

Connecting voice control (Dialogue)

But-

ton

Function

You can start the dialogue at any time by

briefly pressing the ››› Fig. 80  (“PTT”) but-

ton on the multi-function control.

“Push to talk” or “PTT” button.

Short press: start or cancel the speech control

system, interrupt message in process in order

to talk promptly, turn on Bluetooth visible for

3 minutes.

You can CANCEL in any part of the menu.



If the system does not recognise your com-

mand, there is a first help option which al-

lows a new input. After the second failed at-

tempt, the system repeats the second part of

the assistance cue. After a third failure the

system will answer with “Operation cancel-

led” and the dialogue will be ended.

Adjusting the volume

VOL + / Short press: adjust volume of telephone func-

VOL –

You can change the sound volume at any

time with the radio button or with the buttons

on the multifunction control.

tion.

Short press: Answer, Start, End a call.

Long press: Decline an incoming call, transfer

active call to private mode.



The volume transmitted by the speaker de-

pends, among other aspects, on the volume

transmitted by the mobile. If the volume of

the mobile is low, or on silent, it is possible

that no sound will be heard through the vehi-

cle speaker.

Disconnecting voice control (Dialogue)

You can terminate the dialogue at any time

by briefly pressing the ››› Fig. 80  (“PTT”)

button on the multi-function control. If the

system is waiting for a command, you can

end the dialogue with the “CANCEL” com-

mand.

Voice control

The voice control system is activated with the

button ››› Fig. 80  (“PTT”).

Adjust the volume of your Bluetooth device to

the maximum.

Thanks to the voice control you can use many

telephone functions without having to take

your eyes off the road or your hands off the

steering wheel.

Do not leave headphones connected to the

Bluetooth device when you wish to use the

hands free system.

Interrupting an ongoing message

By pressing the ››› Fig. 80  (“PTT”) button

during the message, only the current mes-

sage is ended and it is possible to give an-

other command.

Complying with these requirements, if the

speaker volume is very high, adjust it using

the controls on the steering wheel ››› page 71

or the volume control on the radio.

Dialogue is the time during which the voice

control system transmits messages and can

receive spoken orders (commands).

If a call is received, then the dialogue is im-

mediately interrupted.

Communications and multimedia

Voice control orders (commands)

●

Voice control can be used in the following

languages:

Avoid poor articulation of words.

The hands-free microphone is directed to-

wards the driver, therefore, only the driver

should try to operate the system.

Keep the doors, windows and sun roof

closed if possible to avoid background

noises that might affect the system.

Spanish, Mexican Spanish, German, English,

US English, French, Canadian French, Italian,

Portuguese, Czech, Russian and Dutch.

●

To make a call when there is heavy back-

ground noise we recommend using the

speech controlled telephone book instead of

speaking individual digits. This will help

avoid mistakes when specifying telephone

numbers.

●

Keep the air vents directed away from the

microphone (located on the interior light).

The language is configured at the dealer and

can only be changed at a SEAT Official Serv-

ice.

●

At high speeds, you might need to speak

louder to drown out background noises.

●

Avoid other noises in the vehicle during a

The languages available in each vehicle de-

pend on the destination of the vehicle.

dialogue (e.g. other passengers speaking in

the vehicle).

Basic commands, valid anywhere in the

●

Note the following to ensure that you are

properly understood:

Avoid speaking when the system is saying

a cue.

The system repeats all the possible com-

mands.

HELP

●

Speak in a normal tone and without pauses

or exaggerated pronunciation.

CANCEL

Cancels a running dialogue.

Other commands for operating the Bluetooth system

Command

CALL [NAME]^a)

PHONE BOOK

CALL LIST

Action

Dialling a contact from the address book.

This allows the user to display all the contacts, select one to call or store/delete its name by voice command.

The Received calls, Missed calls or Dialled numbers list is displayed.

You can enter a telephone number so that you can call the applicable number ››› page 78.

The system dials the last number.

DIAL NUMBER

REDIAL

Communications and multimedia -> Bluetooth System* for Your Seat Ibiza SUV Fourth Generation (2009-2017)

Related Topics

Popular Owner Manuals

Latest Owner Manuals