Accessories, parts replacement and modifications
163
First consult your Authorised Service Centre if you wish to use a mobile tele-
phone or a two-way radio with a transmitting power in excess of 10 watts.
Here you will receive information concerning the technical possibilities for
retrofitting this equipment.
WARNING
Incorrectly performed modifications or other work on your vehicle can lead
to malfunctions and cause accidents.
Mobile telephones and two-way radios should be fitted only by a qualified
workshop, for example an Authorised Service Centre.
Roof aerial*
WARNING
•
Always concentrate primarily on driving. If you are distracted while
driving you could have an accident.
Never attach the telephone mountings to the surfaces covering the
The vehicle may be fitted with a collapsible roof aerial* with antitheft
system*, which can be folded backwards, when, for example, going through
an automatic carwash.
•
airbag units or within the range of the airbags, danger of injury if the airbag
is triggered.
To fold
Unscrew the aerial rod, tilting it backwards into a horizontal position and then
screw in again.
•
If you use mobile telephones or two-way radios in the vehicle without
an external aerial, electromagnetic radiation in the vehicle could exceed
authorised limits. This also applies to external aerials that have not been
correctly installed.
To return to working position
Continue in the reverse order to that given in the previous instruction.
Caution
Failure to observe the above conditions could cause the electronics to
malfunction. The most common causes of faults are:
Mobile telephones and two-way radios
•
•
•
no external aerial,
You will require an external aerial for mobile phones and two-
way radios.
external aerial incorrectly installed,
transmitting power in excess of 10 watts.
SEAT has approved your vehicle for use with mobile telephones and two-way
radios providing the following conditions are observed:
Note
Please observe the operating instructions of your mobile telephone / two-way
radio.
•
•
The correct installation of an external aerial,
transmitting power of maximum 10 watts.
An external aerial is needed to give the equipment its optimal range.
Safety First
Operating instructions
Tips and Maintenance
Technical Data