2021-2026 Seat Ibiza SUV Lights and visibility -> Mirrors User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights and visibility -> Mirrors for Your Seat Ibiza SUV Fifth Generation (2018-2026)

Lights and visibility  
97  
Headlight washer system  
Automatic anti-dazzle interior mirror*  
The headlight washers clean the headlight lenses.  
The automatic anti-dazzle function can be switched on and off  
as desired.  
The headlight washers are activated automatically when the windscreen  
washer is used and the windscreen wiper lever is pulled towards the steering  
wheel for at least 1.5 seconds – provided the dipped headlights or main  
beams are switched on. Clean off stubborn dirt (insects, etc.) from the head-  
lights at regular intervals, for instance when filling the fuel tank.  
Note  
•
To ensure that the headlight washers work properly in winter, keep the  
nozzle holders in the bumper free of snow and remove any ice with a de-icer  
spray.  
•
To remove water, the windscreen wipers will be activated from time to  
time, the headlight wipers will be activated every three cycles.  
Fig. 67 Automatic anti-  
dazzle interior mirror.  
Switching off anti-dazzle function  
Mirrors  
A
B
–
Press button A ⇒ fig. 67. Warning lamp A goes out:  
Interior mirror  
Switching on anti-dazzle function  
It is dangerous to drive if you cannot see clearly through the  
rear window.  
A
–
Press button A ⇒ fig. 67. Warning lamp is lit.  
Anti-dazzle function  
Manual anti-dazzle function for interior mirror  
The anti-dazzle function is activated every time the ignition is switched on.  
The green indicator lamp lights up in the mirror housing.  
In the basic mirror position, the lever at the bottom edge of the mirror should  
be at the front. Pull the lever to the back to select the anti-dazzle function.  
When the anti-dazzle function is activated the interior mirror will darken auto-  
matically according to the amount of light it receives (for example from the  
headlights of a vehicle behind). The anti-dazzle function is cancelled if  
reverse gear is engaged.  
Safety First  
Operating instructions  
Tips and Maintenance  
Technical Data  
98  
Lights and visibility  
2. Turn the rotary knob to position the mirror so that you have a  
good view to the rear of the vehicle.  
Note  
The automatic anti-dazzle function will only work properly if the sun  
•
3. Turn knob to position R (right exterior mirror).  
blind* for the rear window is retracted and there are no other objects  
preventing light from reaching the interior mirror.  
4. Swivel the rotary knob to position the mirror so that you have a  
•
If you have to stick any type of sticker on the windscreen, do not do so in  
good view to the rear of the car ⇒  
.
front of the sensors. Doing so could prevent the anti-dazzle function from  
working well or even from working at all.  
Heating the exterior mirrors*  
–
–
Turn the knob to demisting position ⇒ fig. 68.  
Exterior mirrors  
Place the control in position L or R once the mirrors have  
demisted to prevent unnecessary use of the battery.  
The exterior mirrors can be adjusted using the rotary knob in  
the centre console.  
Folding in exterior mirrors*  
–
Turn the control ⇒ fig. 68 to position to fold in the exterior  
mirrors. You should always fold in the exterior mirrors if you are  
driving through an automatic car wash. This will help prevent  
damage.  
Folding exterior mirrors back out to the extended position*  
Turn the knob to position L or R to fold the exterior mirrors back  
out ⇒  
–
.
Synchronised wing mirror adjustment*  
1. Turn the control to the position L (left exterior mirror).  
Fig. 68 Exterior mirror  
control  
2. Turn the rotary knob to position the mirror so that you have a  
good view to the rear of the vehicle. The right exterior mirror will  
be adjusted at the same time (synchronised).  
Basic setting of exterior mirrors  
1. Turn knob ⇒ fig. 68 to position L (left exterior mirror).  
Lights and visibility  
99  
WARNING  
•
The rear view convex or aspheric mirror increase the field of vision  
however the objects appear smaller and further away in the mirrors. If you  
use these mirrors to estimate the distance to vehicles behind you when  
changing lane, you could make a mistake. Risk of accident.  
•
If possible, use the interior mirror to estimate distances to vehicles  
behind you.  
•
Make sure that you do not get your finger trapped between the mirror  
and the mirror base when folding back the mirrors. Risk of injury!  
For the sake of the environment  
The exterior mirror heating should be switched off when it is no longer  
needed. Fuel is wasted otherwise.  
Note  
•
If the electrical adjustment ever fails to operate, the mirrors can be  
adjusted by hand by lightly pressing the edge of the mirror glass.  
The following guideline applies to vehicles with electric exterior mirrors:  
•
If the mirror housing is moved as a result of exterior force (e.g. knocked when  
parking the vehicle), the mirrors must be folded in electrically to the final  
position. Do not readjust the mirror housing by hand, as this will interfere  
with the mirror adjuster function.  
•
The rear view mirrors can be adjusted separately or simultaneously, as  
described before.  
Safety First  
Operating instructions  
Tips and Maintenance  
Technical Data  

Related Topics

Lights and visibility
Lights Interior lights Visibility

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot