26
Seat belts
–
–
–
Press the upper part of the shoulder belt guide and hold it in this
Belt tension devices*
position ⇒ page 25, fig. 16.
Move the shoulder belt guide up or down until you have adjusted
Function of the belt tension device
the seat belt ⇒ page 23.
During a frontal collision, the seat belts on the front seats are
tensioned automatically.
After adjusting, pull the shoulder belt sharply to check that the
catch on the shoulder belt guide is engaged securely.
The seat belts for the front occupants are equipped with belt tension devices.
Sensors will trigger the belt tension devices during severe head-on, lateral
and rear collisions only if the seat belt is being worn. This retracts and
tightens the seat belts, reducing the forward motion of the occupants.
Incorrectly fastened seat belts
The belt tension device can be triggered only once.
Incorrectly worn seat belts can cause severe injuries.
The belt tension devices will not be triggered in the event of a light frontal,
side or rear collision, if the vehicle overturns, or in situations where no large
forces act on the front, side or rear of the vehicle.
Seat belts can provide optimal protection only if the belt web is
properly worn. The seat belts must be fastened exactly in the order
described in this chapter. An incorrect sitting position impairs
substantially the protection a seat belt offers and can lead to severe
or fatal injuries. The risk of severe or fatal injuries is especially
increased when a deploying airbag strikes an occupant who has
assumed an incorrect sitting position. As driver, you are responsible
for all vehicle occupants, especially children. Therefore:
Note
•
If the belt tension devices are triggered, a fine dust is produced. This is
normal and is no indication that there was a fire in the vehicle.
The relevant safety requirements must be observed when the vehicle or
•
components of the system are scrapped. A qualified workshop is familiar with
these regulations and will be pleased to pass on the information to you.
–
Never permit anyone to assume an incorrect sitting position in
the vehicle while travelling ⇒
.
Service and disposal of belt tension devices
WARNING
•
An incorrectly worn seat belt increases the risk of severe injuries.
Before every trip, instruct your passengers to adjust their seat belts
The belt tension devices are components of the seat belts that are installed
in the seats of your vehicle. If you work on the belt tension devices or remove
and install parts of the system when performing other repair work, the seat
belt may be damaged. The consequence may be that, in the event of an acci-
dent, the belt tension devices function incorrectly or not at all.
•
properly and to wear them during the trip.
Read and always observe information and warnings concerning the use
of seat belts ⇒ page 21.
•
English 
