2020-2024 Skoda Enyaq 4 Door Heating and air conditioning system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Heating and air conditioning system for Your Skoda Enyaq 4 Door First Generation (2020-2024)

88 Heating and air conditioning system › Climatronic automatic air conditioning system  
Press the catch and remove the  
wiper blade.  
Insert the new wiper blade until it  
clicks into place.  
Fold the windscreen wiper arm  
back onto the windscreen.  
›
›
›
›
Heating and air conditioning system  
Climatronic automatic air conditioning system  
What you should be mindful of  
We recommend keeping the internal temperature at most 5  
°C lower than the external temperature.  
▶
Turn on the ignition and push the  
control lever down.  
We recommend switching the cooling system off about 10 mi-  
nutes before the end of the journey to prevent odour forma-  
tion.  
▶
Annual disinfection of the air conditioning is recommended.  
▶
Cap for refilling the windscreen washer fluid  
WARNING  
Danger of misting!  
Always keep the fan on.  
▶
WARNING  
Risk of accident!  
In recirculation mode, there is no fresh air supply from the out-  
side. This can result in loss of driver attention and fogging up of  
windows.  
Keep the recirculation mode switched on for a short time only.  
▶
Functionality  
Smart and classic air conditioning  
Smart air conditioning is an automatic mode with preset selec-  
tion options.  
The classic air conditioning system enables the individual func-  
tions to be set.  
Heating and air conditioning system › Climatronic automatic air conditioning system 89  
Automatic mode  
Automatic mode keeps the temperature constant and prevents  
the windows from misting.  
Operating conditions for the cooling system  
✓ Outside temperature above 2 ° C  
✓ Ignition on  
✓ Fan switched on  
Cooling system  
When the cooling system is switched on, the temperature and  
humidity in the vehicle will drop.  
Switching on the cooling system prevents the windows from  
misting up.  
Operation  
Menu for operating the air conditioning  
Recirculated air mode  
The recirculation mode prevents contaminated outside air get-  
ting into the interior of the vehicle.  
Press  
under Infotainment.  
›
The following menu is displayed:  
Display smart air conditioning with pre-determined pre-  
set options  
Show classic settings for the air conditioning  
Air Care  
Air Care  
The Air Care function reduces the penetration of pollutants into  
the vehicle interior. At the same time, the air is both circulated  
and cleaned.  
Further settings for air conditioning  
For proper operation, the doors and windows must be closed.  
After it is switched on, the air conditioning is started accord-  
ing to the settings, before it is switched off.  
The function is started/switched off by tapping on the function  
surface  
system.  
Air Care in the operating menu of the air conditioning  
When the Air Care function surface turns green, this indicates  
that the function has been switched on. Air Care is displayed in the  
status bar.  
Settings  
Set smart air conditioning  
Press  
ment screen.  
under the Infotainment and tap  
in the Infotain-  
›
When the Air Care function surface turns white, this indicates  
that the function has been switched on. Air Care is displayed in the  
status bar.  
Depending on the equipment, a menu with a number of the fol-  
lowing functions is displayed:  
After the function is switched off, the function surface Air Care  
lights up green for a certain time.  
Switch air conditioning on or off  
Front  
Rear  
Show the front settings  
Show the rear settings  
90 Heating and air conditioning system › Climatronic automatic air conditioning system  
Preselect option for ventilation/defrosting of wind-  
Set classic air conditioning  
screen  
Press  
ment screen.  
under the Infotainment and tap  
in the Infotain-  
›
Preselect option for the flow of warm air into the foot-  
well  
The following menu is displayed:  
Preselect option for the flow of warm air in the hand  
area and switching on the steering wheel heating  
Preselect option for the flow of cold air into the foot-  
well  
Preselect option for the flow of external air into the in-  
terior  
Preselect option for a short-term increase in heating  
output  
Preselect option for a short-term increase in cooling  
output  
Switch maintenance of the interior temperature on/off  
according to the temperature setting for the driver's  
side  
Switch the seat heating on/off » page 94, Operation  
Decrease the temperature  
A
B
C
D
E
Show the front settings  
Set the direction of the air outlet  
Show the rear settings  
Increase temperature  
Overview of the currently selected functions  
Switch on automatic mode and set the operating power  
Set the blower speed  
The selected preset option is activated for a limited period of  
time.  
F
To start the preset option, certain conditions must be met  
due to the condition of the vehicle. These conditions can neither  
be influenced nor detected.  
G
Option for setting preferred Climatronic func-  
tions » page 101, Operation  
Switch Climatronic on/off  
When switching off the preselect option  
the steering  
Switching the windscreen heater on/off » page 93, Opera-  
tion  
wheel heating is also switched off. This also applies to the situa-  
tion where the steering wheel heating was switched on manually  
before starting this preselect option.  
Switch maintenance of the interior temperature on/off ac-  
cording to the temperature setting for the driver's side  
Turn steering wheel heating on/off » page 94, Operation  
Heating and air conditioning system › Climatronic automatic air conditioning system 91  
Automatic windscreen heating - Switch on/off the automatic windscreen  
heating » page 93, Settings  
Switching on/off the automatic start of the seat and steering  
wheel heating when the ignition is switched on (depending on  
the interior temperature)  
▶
▶
Switch recirculated air mode on/off  
Switch the cooling system on/off  
Switch the seat heating on/off » page 94, Operation  
Lock the increase in the heating output of the rear seat  
heating and set the rear temperature » page 94, Settings  
The function is displayed after tapping the function surface  
C .  
Consumption-friendly operation of the Climatronic  
If one of the seats is not occupied, the Climatronic adjusts the  
air temperature accordingly to reduce energy consumption.  
Eco is displayed in the infotainment screen.  
Decrease the temperature  
Increase temperature  
Troubleshooting  
The temperature can also be set using two fingers in the pro-  
gress bar under the temperature setting area.  
Water under the vehicle  
When the cooling system is switched on, water can drip off the  
air conditioning system. This is not a leak.  
The rear temperature can also be set on the display in the  
centre console at the rear.  
With a temperature setting outside of the number range, one of  
the following icons will be displayed in the Infotainment screen:  
Fogging  
Switch on automatic mode.  
›
LOW Maximum cooling power  
HIGH Maximum heating power  
Or:  
Increase the blower speed, switch on the cooling system, and  
set the air distribution to the windscreen.  
›
The air conditioning system is also set in the ŠKODA Connect  
application » page 151, Functionality.  
Automatic switch-off of the cooling system  
If the coolant temperature is too high, the cooling system may  
switch off automatically. This ensures sufficient engine cooling.  
Further Climatronic settings  
Tap the functional area in the operating menu for the air  
›
conditioning.  
The following menu is displayed:  
Automatic air recirculation - Automatic air circulation mode on/off  
▶
Also included depending on vehicle equipment:  

Related Topics

Popular Owner Manuals