Bluetooth
Optimum understanding of the voice commands depends on several factors.
The following menu items can be selected from the Bluetooth menu item.
Speak with a normal tone of voice without intonation and excessive pauses.
Avoid a bad pronunciation.
Close the doors, windows and sliding roof, to reduce or stop disturbing exte-
rior noise.
It is recommended to speak louder at higher speeds, so that the tone of your
voice is louder than the increased surrounding noise.
During the dialogue, limit additional noise in the vehicle, e.g. passengers talk-
ing at the same time.
›
■
User - Overview of the stored users
New user - Search for new mobile phones in reception range
Visibility - Switches on the visibility of the phone for other devices
Media Player
›
■
›
■
■
›
■
Active device
Paired devices
Search
■
›
■
■
Phone name - option to change the name of the phone (default SKODA_BT)
Do not speak, if the system makes an announcement.
›
The microphone for voice control is inserted in the moulded headliner and di-
rected to the driver and front passenger. Therefore the driver and the front
passenger can operate the equipment.
Settings
The following menu items can be selected from the Settings menu item.
■
Phone book
1)
■
Update
List
Entering a phone number
■
The telephone number can be entered as a continuous series of individually
spoken digits (the whole number at once) or in the form of digital blocks (sepa-
rated by short pauses). After each order of digits (separation through brief
voice pause) all of the digits detected up to now are repeated by the system.
■
Surname
First name
■
■
Ring tone
Back
The digits 0 - 9, symbols +, , # are permitted. The system detects no continu-
ous digit combinations such as twenty-three, but only individually spoken dig-
its (two, three).
Return in the Start menu of the telephone.
Voice control
Switching on voice control
Press the
Press the
button on the adapter » Fig. 100 on page 95 briefly.
button on the multifunction steering wheel briefly » page 94,
›
Introduction
1
›
Operating the phone on the multifunction steering wheel .
This chapter contains information on the following subjects:
Dialogue
Voice commands
97
98
Switching off voice control
If the system is currently playing a message, the message that is currently be-
ing played will have to be stopped as follows:
Press the
Press the
button on the adapter briefly.
button on the multifunction steering wheel briefly.
›
Dialogue
1
›
The period of time during which the system is ready to receive voice com-
mands and to carry them out is called a dialogue. The system gives audible
feedback and guides you if necessary through the relevant functions.
If the system is expecting a voice command, you can end the dialogue yourself
as follows.
with the CANCEL voice command.
›
Press the
Press the
button on the adapter.
button on the multifunction steering wheel briefly.
›
1
›
1)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the naviga-
tion system menu; refer to the » Operating instructions for the Amundsen+ navigation system.
97
Communication and multimedia
English 
