1999-2006 Skoda Fabia 4 Door Heating and air conditioning -> Climatronic (automatic air conditioning system) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Heating and air conditioning -> Climatronic (automatic air conditioning system) for Your Skoda Fabia 4 Door First Generation (1999-2006)

Climatronic (automatic air conditioning system)  
Control elements  
Introduction  
This chapter contains information on the following subjects:  
Control elements  
Automatic mode  
Setting the temperature  
Recirculated air mode  
Controlling the blower  
Defrosting windscreen  
90  
91  
91  
91  
91  
92  
Climatronic in automatic mode ensures the best-possible setting of the tem-  
perature of the outflowing air, the blower stage and air distribution.  
The system also takes sunlight into account, which eliminates the need to al-  
ter the settings manually.  
Fig. 97 Climatronic: Control elements  
The cooling system operates only if the following conditions are met.  
The buttons/control dial  
The cooling system is switched on » page 90.  
The engine is running.  
The outside temperature is above approximately +2 °C.  
1
Setting the interior temperature » page 91  
Display  
2
3
Display of selected interior temperature  
Degrees Celsius or Fahrenheit, change the displayed temperature  
units » page 91  
If the coolant temperature is too high, the cooling system is switched off to  
ensure that the engine cools down.  
4
5
6
7
Automatic operation of the air conditioning system  
Ventilation or defrosting of the windscreen activated  
Direction of air flow  
Recirculated air mode activated  
Cooling system activated  
Note  
We recommend that you have Climatronic cleaned by a specialist garage  
once every year.  
During operation of the Climatronic, under certain circumstances an increase  
in engine idle speed can occur in order to ensure adequate heating comfort.  
8
9
Blower speed set  
The buttons/control dial  
10  
11  
Adjust the blower speed » page 91  
Interior temperature sensor  
 Automatic mode » page 91  
De-mist or de-ice the windscreen » page 92  
Air flow to the windows  
Air flow to the upper body  
Air flow in the footwell  
90  
Using the system  
Switch recirculation on/off » page 91  
CAUTION  
Switch the cooling system on/off  
Lengthy and uneven distribution of the air flow out of the vents (especially  
around the feet) and large differences in temperature, for example, when get-  
ting out of the vehicle, can cause susceptible individuals to catch a cold.  
Note  
11  
Do not stick anything on or cover the interior temperature sensor  
it could have an unfavourable effect on the Climatronic system.  
» Fig. 97;  
Recirculated air mode  
Recirculated air mode prevents polluted air from outside the vehicle getting in-  
to the vehicle, for example when driving through a tunnel or when standing in  
a traffic jam.  
Automatic mode  
The automatic mode is used in order to maintain a constant temperature and  
to demist the windows in the interior of the car.  
Switching on  
Switching on  
Press the button » Fig. 97 on page 90.  
Set a temperature between +18 °C and +29 .  
The display shows the icon.  
Move the air outlet vents 3 » Fig. 94 on page 85 and 4 so that the air flow is  
directed slightly upwards.  
Switching off  
Press the  button » Fig. 97 on page 90;  will appear in the display.  
Press the button » Fig. 97 on page 90 again.  
Automatic mode can be switched off by pressing any of the air distribution  
buttons or by increasing/decreasing the blower speed. The temperature is  
nevertheless regulated.  
The icon in the display goes out.  
WARNING  
Never leave recirculated air mode on over a longer period, as “stale air” can  
cause fatigue in the driver and the passengers, reduce attention levels and  
also cause the windows to mist up. The risk of having an accident increa-  
ses. Switch off recirculated air mode as soon as the windows start to mist  
up.  
Setting the temperature  
Setting temperature  
Switch on the ignition.  
Turn the control dial  
1
» Fig. 97 on page 90 to the left or to the right to in-  
crease or decrease the temperature.  
Note  
Switching between Celsius and Fahrenheit  
If recirculated air mode is switched on for around 15 minutes, the symbol   
will begin to flash in the display as a sign that the recirculated air mode is  
switched on long-term. If the recirculated air mode is not switched off, the  
symbol flashes for around 5 minutes.  
Press and hold the  and buttons simultaneously.  
The information appears in the display in the desired temperature unit (no.  
3 » Fig. 97 on page 90).  
The interior temperature can be set between +18 °C and +29 . The interior  
Controlling the blower  
temperature is regulated automatically within this range.  
The Climatronic system controls the blower stages automatically in line with  
the interior temperature. However, the blower level can be manually adjusted  
to suit your particular needs.  
If you set the temperature below +18 , “LO” appears in the display.  
If you set a temperature higher than +29 , “HI” appears in the display.  
10  
Turn control dial  
» Fig. 97 on page 90 to the left or to the right to increase  
In both end positions, the Climatronic operates at maximum cooling or heating  
capacity. There is therefore no automatic temperature control.  
or decrease the blower speed.  
If the blower is switched off, the Climatronic system is switched off.  
91  
Heating and air conditioning  

Related Topics

Popular Owner Manuals