Settings
Door, boot lid and bonnet warning
Read and observe on page 33 first.
Read and observe on page 33 first.
You can change certain settings yourself through the MAXI DOT display. The
current menu item is shown in the top of the display under a line.
If at least one door is open, or the boot or bonnet is open, the MAXI DOT dis-
play shows the vehicle with the corresponding door or boot/bonnet open.
You can select the following menu options:
An audible signal also sounds if the vehicle is travelling at more than 6 km/h.
Language
Auto Check Control
You can set the language for the warning and information texts here.
Read and observe on page 33 first.
MFD data
Activate or deactivate certain displays of the multifunction display here.
Vehicle condition
Certain functions and conditions of individual vehicle systems are checked
continuously when the ignition is switched on and also while driving.
Time
The time, time format (12 or 24 hour indicator) and the changeover between
summer/winter time can be set here.
Some error messages and other information are displayed in the MAXI DOT
display. The messages are displayed simultaneously with the icons in the MAXI
DOT display or with the warning lights in the instrument cluster » page 35.
Winter tyres
Here, you can set the speed at which an audible signal should sound. This
function is, for example, used for winter tyres where the maximum permissible
speed is lower than the maximum speed of the vehicle.
The Vehicle status menu item is shown in the main menu of the MAXI DOT
display whenever at least one fault message is present. The first of the fault
messages is displayed after this menu item is selected. Several error messages
are shown on the display under the message e.g. 1/3. This indicates that the
first of a total of three error messages is being displayed.
The following is shown on the information display if this speed is exceeded:
Winter tyres max. speed ... km/h.
Units of measurement
The units for the temperature, consumption and distance driven can be set
here.
As long as the operational faults are not rectified, the symbols are always indi-
cated again. After they are displayed for the first time, the symbols continue to
be indicated without any extra messages for the driver.
Alt. speed dis.
Warning symbols
Display of the second speed in mph1) can be activated here.
Engine oil pressure too low
» page 36
» page 34
» page 36
Service
The days and kilometres remaining until the next service can be displayed
here.
Clutches of the automatic DSG gearbox
are too hot
Check engine oil level,
Factory setting
The display can be restored to its factory settings here.
Clutches of the automatic DSG gearbox are too hot
engine oil sensor defective
If the symbol appears in the MAXI DOT display, this indicates that the tem-
perature of the automatic DSG gearbox clutches is too high.
1)
On models on which the speedometer indicates mph, the second speed is displayed in km/h.
34
Using the system
English 
