Driver assist systems › Speed limiter 111
Status display in the instrument cluster display
lights up - not at safe distance (only in
MAXI DOTDisplay)
Press the button.
The Front Assist menu
item is displayed.
›
Press the setting wheel
A.
›
illuminates - warning in case of collision
Automatic braking in the event of a collision
If there is a risk of collision, the symbol lights up as a
warning
from the isolation box. If you do not re-
spond to the warning, the vehicle will slow down.
At a driving speed of up to 30 km / h, the vehicle is
braked without prior warning.
Activation / deactivation and setting in Infotain-
ment
In the following menu.
The automatic braking can be stopped by pressing
the accelerator pedal or by steering.
With automatic braking, the pressure in the brake
system increases. The brake pedal cannot be operat-
ed by using the pedal as normal.
Or:
Show system deactivation in the display of the in-
strument cluster
WARNING
Risk of accident!
Front Assist does not respond to crossing or oncom-
ing vehicles.
illuminates together with
Deactivate Front Assist when handling the vehi-
cle on a truck, a car ferry etc.
Operating conditions
✓ ASR activated.
✓ The driving speed is higher than 5 km/h.
Troubleshooting
Front Assist is not available
illuminates together with
Functional restriction
Clean the front radar sensor.
Stop the engine and start again.
If Front Assist is still unavailable, check the brake
lights on the vehicle or on the attached trailer.
Replace the defective bulb.
If the brake lights are working and Front Assist is
still unavailable, seek the help of a specialist ga-
rage.
›
The function may be restricted or unavailable in the
following cases.
›
›
About 30 seconds after starting.
When driving through a sharp bend.
During an ESC intervention.
▶
▶
▶
›
›
Settings
There was an unfounded warning or system inter-
vention
Automatic activation
Front Assist is automatically activated when the igni-
tion is switched on.
Clean the front radar sensor.
If the system is not working properly, disable Front
›
›
Activation / deactivation in the instrument cluster
In the MAXI DOTDisplay in the Assistants menu item.
Assist and seek the help of a specialist garage.
In the segment display in the Front Assist menu item.
Speed limiter
Functionality
› Hold the A button up
or down. The Front As-
sist menu item is dis-
played.
The speed limiter controls the maximum driving
speed according to the set speed limit.
› Press the B button.
If the limit is exceeded when driving downhill, brake
the vehicle with the brake pedal.
Status display in the instrument cluster display
illuminates - the cruise control is activated.
English 
